电刷

皮克6000螺旋CT滑环电刷寿命延长改进的应用研究

Improve of extend pick PQ series helix slip ring CT electric brush

电刷镀NiWCo三元合金镀液及工艺研究

Study on Liquor of Brush Plating Ni-W-Co Allay and Brush Plating Process

Cr掺杂碳陶瓷电刷制备与性能研究

Preparation and performance study on Cr doped Carbon-ceramic electric brushy

电刷镀镍基Al2O3复合镀层组织和性能的研究

Microstructure and Properties of Electro-brush Plating Nickel-base Al_2O_3 Composite Coating

电刷镀镍/镍包纳米Al2O3颗粒复合镀层微动磨损性能研究

Anti-fretting Properties of Ni / Ni-coated nano-Al_2O_3 Composite Coating Prepared by Electro-brush Plating

镍基纳米Al2O3粉末复合电刷镀镀层的耐磨性

Wear resistance of Ni / Nano-Al_2O_3 composite coatings plated by composite brush plating

新型电刷材料Ti3SiC2的合成与研究进展

Synthesis and Progress of A New Brush Material Ti_3SiC_2

电刷镀纳米Al2O3/Ni复合镀层的组织与接触疲劳性能研究

Microstructure and Contact Fatigue Performance of n-Al_2O_3 / Ni Composite Coating by Electro-brush Plating

用于铜-石墨电刷的SCM高比表面积铜粉

SCM Copper Powder with Higher Specific Surface Area Used in Copper-Graphite brush

快速Ni电刷镀层中缺陷与氢行为的正电子湮没研究

A study of defects and hydrogen behavior in the high-speed Ni selective plating layer by positron annihilation

电刷镀技术在修复ND2型机车柴油机下机体上的应用和探讨

Application and investigation of electroplating technique in renovating lower blocks of ND_2 locomotive diesel engines

MoS2的分布形态对电刷性能的影响

Effect of mos_2 distribution morphology on the properties of the brushes

Ni-P非晶镀层的电刷镀制备工艺及其性能的研究

Study of Ni-P Amorphous Coatings by Electro Brush-plating and Its Properties

应用电刷镀技术制备了含有纳米SiC粉的镍基复合镀层，对该复合镀层的显微硬度和摩擦学性能进行了测试，并讨论了主要工艺参数对这些性能的影响规律。

In this paper , the composite coating of Ni / nano SiC was prepared by brush-plating technology .

在NiP电刷镀工艺的基础上，研究和开发了NiWP电刷镀工艺，镀液中加入钨酸盐。

Brush plating of Ni-W-P ternary alloy was developed in which tungstate was added into Ni-P binary plating solution .

Ni基与Ni-P基含MoS2复会电刷镀层的减摩特性

Study on friction-reducing property of MoS_2-containing Ni base and Ni-P base composite brush plating layers

（Ni-P）-SiC复合电刷镀

( Ni - P ) - SiC Composite Brush Plating

电刷镀非晶态Ni-P合金镀层形貌和结构研究

Morphology and microstructure of amorphous Ni-P alloy coatings prepared by electro brush-plating

电刷镀含纳米SiC粉复合镀层的EPMA分析

EPMA Analysis of Brush-plating Ni / nano-SiC Composite Coating

脉冲换向电刷镀镍基纳米SiO2复合镀层的耐腐蚀性能研究

Corrosion resistance of ni / n-sio_2 composite coatings by pulse-reverse brush plating

非晶态Ni-P电刷镀层晶化过程和动力学的研究

A study on crystallization processes and kinetics of the amorphous Ni-P brush plated coatings

研究了电刷镀Ni-P合金镀层的制备工艺，检验了镀层的耐蚀性和硬度等性能。

Technology for preparation of a brush plated Ni - P alloy coating was studied .

电刷镀Ni-P合金工艺及其耐盐雾腐蚀性能研究

Study on Process and Corrosion Resistance of Ni-P Alloy Brush Plating layers in Salt Spray Test

TL电刷镀Ni-Cu-P非晶态合金工艺研究

Study on the Technology of Ni-Cu-P Amorphous Alloy TL Brush Plating

采用电刷镀技术制得了纳米复合镀层，并用SEM和TEM对其表面形貌、断面组织和微观结构进行了表征，探讨了镀层的生长过程。

The nano-composite coating was prepared by electro-brush plating . Surface and section morphology and microstructure of the coating were characterized by SEM and TEM .

n-Al2O3/Ni复合电刷镀层滑动磨损性能

Sliding Wear Properties of n-Al_2O_3 / Ni Electro-Brush Plating Composite Coating

电刷镀Ni-W过渡层与离子镀TiN复合涂层的结合力和磨损特性

Adhesion Strength and Wear Behavior of Ion Plating TiN Composite Coating with Electric Brush Plating Ni W Interlayer

稀土La~（3+）对Ni-P电刷镀层结构与性能的影响

Influence of Rare Earth La ~ ( 3 + ) on Properties and Structure of Electric Brush-plating Layer of Ni-P

电刷镀技术对Fe3Al基合金室温环境脆性的改善作用

Improvement of room temperature environmental brittlement of fe_3 Al-based alloy by electro-brush plating

研究了镍磷基纳米Al2O3复合电刷镀层（n–Al2O3/Ni–P）的组织特征及摩擦磨损特性，并与镍磷合金刷镀层进行了比较。

Comparing with nickel-phosphorous alloy coating the microstructure , friction and wear characteristics of brush-plated nickel – phosphorous composite coatings containing nano alumina particles ( n-Al2O3 / Ni-P ) were studied .