电解铜

生产中应选择优质电解铜原料，并对一切与铜液接触的原辅材料和器具进行干燥或烘烤，同时应对熔化炉、保温炉、流槽进行覆盖保护和还原处理，以防止氧化和吸气。

High quality copper cathode should be chosen and all the raw or assistant materials should be dried or warmed , meanwhile the melting furnace , holding furnace and launder should be protected and deoxidized in order to protect the melting copper from oxidizing and air suction .

CM型抗侵蚀防水剂在硫酸电解铜工程中的应用

Application of CM-TYPE anticorrosive waterproof agent in sulfate electrolytic copper Engineering

稀土Y在电解铜及Cu-Cr合金中的分布与微观组织特征

Characteristics of distribution and microstructures of Y in Cu and Cu-Cr Alloys

采用电解铜、电解锰、电解锌、工业纯铝为原料，熔制了不同成分的MnCu系合金及CuZnAl合金，并测试了其在不同初始应力下的减振能力。

Mn-Cu and Cu-Zn-Al alloys of varios compositions were prepared with electrolytic copper , manganese and zinc and industrial pure aluminium . Their damping capacity was measured under different original stresses .

比较研究了稀土Y在电解铜和Cu-Cr合金中的分布情况以及它与Cu中合金元素的相互影响。

In this paper , a research has been made on the distribution state of Y in the Cu-Y & Cu-Cr-Y alloys and the interactions among Y and other elements .

所产生的浓缩水经铜回收浓缩系统（RO）浓缩后进入萃取系统，回收电解铜，实现了废水处理的闭路循环。

And the effluent quality reached requirement for production water . The concentrated water entered into the extraction system through copper concentration system ( RO ) for copper recovery , so that the closed recirculation was achieved for wastewater .

利用电解铜废液除杂制硫酸铜的研究

Research on Eliminating Impurities in Copper Sulfate by Using Waste Electrolyte

电解铜碲超标原因及预防措施

Cause of Incompliance of Tellurium with Qualified Cathode Copper and Preventive Measures

火法和湿法生产电解铜过程的生命周期评价研究

Life cycle assessment of metallic copper produced by the pyrometallurgical and hydrometallurgical processes

电解铜整流直流电源及监控技术研究

The Research on Rectifier DC Electrical Source for Electrolyzing Cuprum and Monitor Technique

电解铜表面气孔的防治

Prevention of Porosity on Surface of Cathode Copper

电液伺服振动在电解铜打包生产线上的应用研究

Application and Research of Electrical-hydraulic Servo Vibration in the Bundling Production Line of Electrolytic Copper

文中主要介绍电解铜起重机的主要技术参数、结构特点、工作原理等。

This paper presents main technical parameters , structural features , operation of electrolytic copper crane .

影响电解铜质量因素分析

Influencing Factors of Electrolytical Copper Quality

电解铜熔体净化技术

Purification Technique of Copper-electrolysing Smelted Parts

添加剂对高铋电解铜体系中铜沉积过程的影响

The effect of additives on the copper deposition process in the electrolysis copper system of high bismuth

一次萃取钼蓝法测定锡青铜、黄铜、电解铜中的磷

Determination of Phosphorous in Tin Bronze , Brass and Electrolytic Copper with Single Extraction Molybdenum Blue Method

采用电液比例控制技术对电解铜堆垛装置进行控制。

This paper introduces the application of electro-hydraulic proportional control technology to control the electrolytic copper stacking equipment .

电解铜中铜酸浓度具有明显的混沌特性，本文分别进行了单步预测和多步预测。

The cupric and acid concentrations are single step and multi-step predicted by the method introduced in the dissertation .

电解铜中的氢对铜线坯拉丝影响的实践（上篇：电解铜与熔炼）

The Impact of Copper Wire Drawing by Hydrogen in Electrolytic Copper ( Part One : Electrolytic Copper ﹠ Smelting )

薄板坯连铸&连轧的发展趋向和工程投资问题介绍了连铸连轧法生产电解铜始极片的新工艺。

DEVELOPMENT TREND AND INVESTMENT OF THIN-SLAB CASTING-PROCESS A description is made of new technology for producing starter sh eets of copper electrolysis by continuous casting and rolling .

随着铜冶炼工艺的不断发展和对高品质电解铜需求的增加，对铜阳极板浇铸控制的要求也越来越高。

With the development of copper smelting process and increasing demand for high-quality electrolytic copper , the requirements for copper anode casting control is also getting higher and higher .

用电解铜后的溶液继续分析镍的含量，既简化了分析程序，又排除了钼和铜对镍的干扰，实现了对钼铜合金中铜和镍的联合测定。

It proves to simplify the analysis , avoid interference among the elements of Mo , Cu and Ni , and fulfill the united determination of Cu and Ni in Mo-Cu alloy .

研究了电解铜生产过程中阳极板质量、电解液成分、添加剂和生产操作等因素对电解铜质量的影响，并针对上述影响因素，提出了进一步提高电解铜质量的办法。

Studying the positive plate quality , electrolyte composition , additive and manufacturing operation how to effect electrolytical copper quality in production process and finding the method to improve electrolytical copper quality .

介绍了某电解铜厂在投产初期，针对直流电耗较高的问题，进行了初步的分析和探讨，并就如何降低电耗所采取措施进行论述。

This paper analyses and discusses the problem of high DC power consumption in a copper electrolysis plant during its early stage , and puts forward the method to reduce the DC power consumption .

4年多的运行结果证明，采用该集成工艺可使含铜工业废水循环回用，可回收电解铜100t/a以上，具有较好的经济效益和社会效益。

The operation for more than 4 years demonstrates that the integration process can make the copper-bearing industrial wastewater recycled and reused , with recovery of electrolysis copper over 100 t / a. It has favorable economic and social benefits .

本文主要对泰铜（简称TCI）的ISA电解阴极铜加工机组进行介绍，并和江西铜业集团公司贵溪冶炼厂（简称JCC）的ISA电解阴极铜加工机组进行比较。

This paper introduces the Cathode Washing and Stripping Machine by ISA Process in Thai Copper , comparison is made between those operation units in Guixi Smelter and Thai Copper .

周期反向电流法高电流密度电解精炼铜的研究

Study on high current density copper electrorefining by periodic reversible current

交直流叠加电解精炼铜的可行性研究

Study of the copper electrorefining feasibility by ac / dc electrolysis

应用周期反向电流电解精炼铜的研究

Study on Copper Electrorefining by Current of Period Opposite Direction