有限元

CAD软件与有限元软件的集成技术研究

Research on integrated technique of CAD software with FEA software

基于ANSYS的高速精密定位平台有限元分析

The High-speed Precision Positioning Table FEA Based on ANSYS

方法：采用CT扫描，Mimics软件和Abaqus软件的CAD进行三维有限元模型的创建

Methods : Models were generate by CT scan , Mimics software and Abaqus software .

把动坐标迭代法应用于下部钻具组合（BHA）的非线性有限元分析。

Moving-coordinate reiterative method is used for non-linear finite analysis of BHA .

并使用有限元分析软件对不同微桥进行结构分析，以比较其稳固性

Its distributing of stress is simulated by finite element analysis software order to compare their fixedness .

任意形状的H面矩形波导不连续性的有限元分析

Finite-element analysis of H-plane discontinuities of arbitrary shape in a rectangular waveguide

平面K型圆钢管搭接节点有限元参数分析与极限承载力计算公式

Parametric analysis and design equation of ultimate capacity for unstiffened , overlapped CHS K-joints

异形内R型螺栓头部支承面压力有限元分析

FEM Analysis of Bearing Pressure at Bolted Joint for the Heterogeneous Bolt with the Internal Radius

并利用通用有限元软件ANSYS建立其力学模型并求解。

Utilized general FEM software ANSYS to establish mechanical model and solve .

微机有限元软件包FEM的运行环境设计

Design of running environment for FEM software package

应用螺旋CT断层扫描技术和大型工程软件UG建立三维有限元模型。

Spiral CT tomoscan and UG software were applied to establish 3-dimensional finite-element models .

输电铁塔ANSYS建模及有限元分析

Transmission tower ANSYS modeling and finite element analysis

阐述冷弯方管采用有限元弹塑性非线性分析理论及应用ANSYS软件的非线性分析方法；

The elastic-plastic non-linear behavior of the cold-formed square hollow section columns analyzed by ANSYS is presented ;

Poisson方程的组合杂交有限元方法

Combined Hybrid Finite Element Methods for the Poisson Equation

利用有限元法（FEM）建立力学分析模型是人工材料椎间盘髓核设计的有效手段之一。

Finite-element modeling for mechanical analysis is becoming one of the most important methods to design the artificial nucleus .

用有限元分析软件ANSYS对四分压电陶瓷管进行模态分析，得出该陶瓷管的前12阶谐振频率和模态振型。

Using the ANSYS software of finite element , modal analysis is executed and twelve steps harmonic frequency are obtained .

应用有限元理论，借助于Ansys分析软件对此结构进行内力分析，在此基础上对结构进行预应力配筋。

Using the finite element theories , it makes use of software Ansys doing internal force analyze of this structure .

其次与经典理论解和通用有限元软件ANSYS的结果进行比较说明了本文研究方法的正确性和合理性。

Secondly , comparing with the theoretical solution and the results of ANSYS indicates the correctness and rationality of the present .

采用二维有限元数值分析的方法，开发了用于反向偏置p－n结分析的模拟软件，可以模拟与MOS型功率器件反向耐压有关的终端浅结场环、场板、SiO2介质及界面态。

By using two-dimensional finite-element numerical analysis , we develop a computer simulation program used for terminal field calculation of reverse biased p-n junctions .

锅炉三维造型系统是锅炉CAD应用系统的子系统，三维实体建模是进行有限元分析和空间管路干涉检查的基础。

The solid modeling system is subsidiary to " Boiler CAD Application System " . 3D Solid modeling is basis of FEM analysis and pipe line interference check .

1-DRichards方程特征有限元法的误差估计及数值模拟

Error Estimate and Numerical Simulation for Characteristics Finite Element Solution of 1-D Richards Equation

应用ANSYS软件对NR/炭黑混炼胶的平入口收敛流动进行二维有限元模拟。

The 2 D finite element simulation for the converging flow of NR / carbon black mix at planar entrance was made by ANSYS software .

同时给出了一个用大型有限元分析软件Marc来进行接触分析的实例。

At the same time , an example of finite element contact analysis is analyzed by Marc .

方法：利用螺旋CT扫描的方法，采用图像处理和有限元分析软件建立567及其支持组织的三维有限元模型。

Method : Established a 3-D finite element model of | 567 and their supporting tissues by means of SCT scanning technology and software of image processing and finite element analyzing program .

针对典型的钢桥桥面铺装体系，采用SAP有限元软件，分析了铺装层内的拉应力的变化规律。

The variation of tensile stress in the surface for a typical steel bridge deck surface system is analyzed by means of SAP .

发展了三维不连续变形分析（DDA）与有限元（FEM）耦合计算的力学模型。

A numerical model that coupled three dimensional discontinuous deformation analysis ( 3D DDA ) with finite element method was presented .

SJ型自同步直线振动筛结构有限元及振动特性分析

Finite Element Analysis and Dynamic Analysis for the Structure of SJ Self-synchronizing Vibration Sieve

双参数Morley有限元多重网格法

Multigrid method of double set parameter Morley finite element

基于ANSYS有限元计算，以卸船机大斜撑圆管与耳板的连接为例，探讨管与板连接的设计。

Base on FEM analysis from ANSYS , this paper discusses the design for the junction of pipe and eye plate through an example of junction of them on diagonal pipe of ship-unloader .

建立了粘弹材料盘式制动器摩擦片振动的有限元模型，并模拟实际工况，利用Ansys软件对不同粘弹性的摩擦片进行模态分析。

Second , with the actual working conditions simulated , the finite element vibration model of disc brake-shoe is established . And the vibration of brake-shoes in different viscoelasticity materials are analyzed by ANSYS .