控制结构

kònɡ zhì jié ɡòu
  • control structure
控制结构控制结构
  1. 探讨了Agent的类型及功能,并建立了其行为控制结构。

    Discuss the types and functions of Agent , and build a action control structure .

  2. 如果输入值为True,则执行控制结构上部的代码组。

    If the input value is true , the code groups in the upper part of the control structure execute .

  3. 首次在BASIC语言的控制结构中并入了一个负责作业调度的中央控制逻辑,这就使BASIC为并发性之类的概念提供了高级结构。

    A central logic is first merged into the control of BASIC to process jobs , and then , BASIC is made to supply concurrent operation .

  4. 板材FMS的修正分层控制结构研究

    Research on the modified hierarchical control structure of sheet metal flexible manufacturing system

  5. 根据PID控制结构提出了一种新型神经网络控制器,对其基本结构和学习算法等进行了分析。

    A new neural network controller is proposed based on the PID controller structure . Its basic structures and learning algorithm are analysed .

  6. 然后依据模型对转台系统进行了控制结构设计,利用自适应小波神经网络的逼近特性设计了在线摩擦补偿机构,并与传统的PD控制器结合构成系统的控制器,而且还证明了控制结构的稳定性;

    Then the controller is designed by PD controller and wavelet NNs that is proved a steady compensator for friction .

  7. TMD振动控制结构的发展及应用

    Development and Application of TMD Structural Vibration Control

  8. 为实现分形控制结构,提出了分形控制单元,并采用多Agent技术对分形控制单元的内部结构进行了描述。

    To obtain the fractal control structure , fractal control unit is proposed . In particular , multi-agent technology is used to describe the internal structure of the fractal control unit .

  9. 基于dq数学模型,完整给出采用PI前馈前耦的双环控制结构。

    PI and feedforward decoupling two loop control method is presented completely based on dq mathematical model .

  10. 分析了竖向地震作用下巨-子型控制结构体系MSCSS(Megasubcontrolledstructuralsystem)的反应机理,提出了带附加柱的MSCSS。

    The response mechanism of the mega_sub controlled structural system with additional columns subjected to vertical seismic action is studied in this paper .

  11. 一种BPMFN逆模型补偿的复合控制结构方案研究

    Study of Compound Control Structure Scheme Based on Offset of BP MFN ( Multilayer Feedforward Network ) Inverse Model

  12. 首先,针对完整性判定这个NP-hard问题,提出了一种筛选具备完整性的分散控制结构的分支定界算法。

    Firstly , an algorithm for screening decentralized control structure is proposed based on branch an bound method .

  13. 现代UNIXShellbash、ksh、zsh提供了许多控制结构和操作以创建复杂的脚本。

    Modern UNIX shells bash , ksh , zsh offer many control structures and operations to create complex scripts .

  14. 面向微装配机器人的TSB分级智能控制结构

    TSB hierarchical intelligent control structure for micro - assembly robots

  15. 此外,XPath也没有任何控制结构(如if/else语句),除了简单的比较外也不能执行任何处理。

    Additionally , XPath doesn 't have any control structures ( like if / else statements ) or the ability to perform processing beyond simply comparisons .

  16. 介绍试验型轮式工程机械驱动桥智能化CAD系统,探讨驱动桥方案选型专家系统的问题描述、知识表示、控制结构及求解实现。

    A prototype of intelligent CAD system for driving axle of wheel type construction machinery is introduced . The problem description , knowledge representation , inference engine and implementation of expert system for driving axle model selection are studied .

  17. 基于Runge-Kutta方法得到了在滑道式俯仰角控制结构下分离过程中模型角度、角速度与时间之间的对应关系。

    The Runge-Kutta method is utilized to obtain the relationship between the angle as well as the angular velocity and time in the case of the slide way structure .

  18. 介绍了焦炭高温反应炉的温控工艺及程控曲线,给出了程控曲线的控制结构、主回路以及实现多套PI参数控制的方法。

    The temperature control process and program controlled curve for high temperature reacting furnace of coke were described in the paper , the methods of realizing the control structure , main loop of program controlled curve and of realizing multiple PI parameter control were given .

  19. BGGA方案的主要目标之一是允许程序员创建行为类似控制结构的方法。

    One of the primary goals of the BGGA proposal is to allow programmers to create methods that act like control structures .

  20. 首先,从优化测试功耗的角度出发提出了扫描阵列结构,通过加入Wrapper测试控制结构以及构建并行化的分支扫描链,有效地将测试功耗降低到与正常工作功耗相当的量级。

    First , the low testing power DFT solution & Scan Array architecture are presented . In the Scan Array , the inserted wrapper and paralleled leaf scan chain reduce the testing power as low as the power dissipation in the normal working mode .

  21. 针对HCBP方法,提出了面向目标的黑板控制结构和改进算法;

    The structure and ameliorate arithmetic of the goal oriented blackboard control model were put out based on HCBP .

  22. 论文分析研究了UPFC的电压、电流双闭环控制结构,利用状态反馈和输入前馈方法对电流内环实现了解耦控制,在此基础上,建立了UPFC双闭环控制系统的工程设计方法。

    Firstly , the double closed-loop control structure of UPFC current and voltage was analyzed comprehensively , and then decoupled-control for inner current loop was achieved by state-feedback and input forward-feed . Consequently , practical design method for UPFC double closed-loop control was derived .

  23. 医院执行总量控制结构调整政策的三年动态经济分析

    Dynamic Analysis of Total Amount Control and Structural Readjustment of Income

  24. 最后提出补燃系统的控制结构方案原理图。

    The control scheme for this auxiliary combustion system is presented .

  25. 经济控制结构综合解的能控适定性

    The controllable well-posed property of the synthesis solution of economical control structure

  26. 快速重组制造系统分布式控制结构研究

    Study on Distributed Control Architecture for Rapid Reconfiguration Manufacturing System

  27. 在使用多分支控制结构编程时,也容易出现逻辑问题。

    When using multi-branch control architecture , such mistakes also easily occur .

  28. 一种先进的铜加工分层次工业控制结构

    Configuration of an advanced industrial control hierarchy for Copper Manufacture

  29. 制造系统控制结构的演变与发展

    Evolution and Development of Control Structure in Manufacturing Systems

  30. 圆截面杆件涡激振动控制结构实验

    Experiment on round cross-section rod vortex vibration control