挂车

在一份声明中，特斯拉公司表示，这辆ModelS型号的汽车没有能够识别出从其车道上开过的“明亮天光下拖拉机挂车的白边”。

In a statement , Tesla said it appeared the Model S car was unable to recognise " the white side of the tractor trailer against a brightly lit sky " that had driven across the car 's path .

内江市西林大桥通行150t平板挂车计算与观测分析

Calculation & Observation of 150 t Flat Trailer on XiLin Bridge , NeiJiang City

牵引车、半挂车ABS道路试验及计算方法

Road Test and Calculation Method of ABS in Tractor and Semitrailer

基于PD控制的拖拉机半挂车机组自动直线倒车系统

Automatic Backward Driving System of Tractor-trailer Combination along Rectilinear Path Using PD Control

半挂车图库是半挂车CAD应用系统的重要组成部分。

A gallery of semi-trailers is regarded as a very important comp0siting part of CAD application system of semlwtailers .

重型半挂车ADAMS建模及极限工况仿真

Modeling and Simulation of Heavy-duty Semi-trailer in Extreme Condition Based on ADAMS

利用PD控制设计了拖拉机半挂车机组的自动直线倒车控制系统。

In this paper the automatic navigation of a tractor-trailer combination ( TTC ) along rectilinear path in backward motion based on PD control was presented .

联邦监管机构表示，根据初步调查报告显示，在一个十字路口，一辆半拖挂车在开启了Autopilot模式的ModelS前左转。

Federal regulators say preliminary reports show the Tesla crash happened when a semi-trailer rig turned left in front of the car that was in Autopilot mode at a highway intersection .

JH挂车双级断气制动系

A Two-stage Air-break brake System for JH Model Trailers

介绍了JH单轴长料挂车双级断气制动系的特点、结构与工作原理。

In this paper the features , structure and operating principles of a two-st -

120t凹式半挂车鹅颈结构设计与有限元分析

Structural design and FEA of gooseneck of the 120t concave semi-trailer

液化气体运输半挂车V型支座边角处罐体的局部应力计算，是把长的V型支座转化为多个符合局部应力计算条件、排列整齐的短支座。

Local stress calculation for the " V " type support corner of liquefied gas transport tank trailer is transform long support into short supports that accord with calculation condition of local stress and arrange orderly .

多轴挂车转向机构的6-sigma设计

Multi-axle Plat Steering Mechanism Optimization Design Based On 6-sigma Method

本文以使用最为广泛的有限元分析软件ANSYS为分析平台，在ANSYS软件中建立半挂式散装水泥车的几何模型和有限元模型，并对半挂车进行有限元分析。

In this paper the bulk-cement semitrailer geometry model and finite element model is built , and finit element analysis of semitrailer is also made by using the popular FEA software ANSYS as an analysis platform .

在ANSYS软件平台上进行了CAE软件包的二次开发，设计了集装箱半挂车车架优化设计专用软件模块。

The second development of CAE software package was carried out in the platform of ANSYS software , and the special purposed module of software for the optimization design of container semi-trailer frame was designed .

GB/T5053.2-1985汽车与挂车之间12N型电连接器

Electrical connections between motor vehicles and towed vehicles & Type 12N

介绍了东风汽车公司重型车厂开发设计的30t凹梁式车辆运输半挂车的结构特点及设计方案。

30 - ton concave beam type semitrailers of vehicular traffic , developed by DFM heavy vehicle factory , are introduced including the structure feature and design plan .

介绍了日本日野TOKYU、TLE型挂车后悬架修理、配件代用加工及改进方法。

This paper presents the repair of rear suspension for HINO TOKYU TLE trailer , the substitution and remaking methods of its spare parts .

本文对引进及消化吸收美国CPI公司高压气瓶技术进行了分析，并将其开发成能够符合国内道路运输要求的高压高纯度气体的专用运输半挂车。

The author and his colleague comprehended and analyzed the technology of high pressure cylinder introduced from America CPT company , then developed it into special semi - trailer subject to domestic requirement of road transportation for high pressure and high purity gas .

分析结果表明，开发的含Nb-Ti钢带具有优异的韧性、冷成形性能和良好的焊接性能，完全满足汽车、半挂车用钢的要求。

The analysis indicated that the developed Nb-Ti micro-alloying plate has the outstanding toughness , the cold forming performance and the good welding performance , which completely satisfied with the request of automobile and semi-trailer .

介绍在2辆400t液压全挂车上各安装一个200t桥式运输转盘，并采取了牢固的运输固定措施后，成功地将珠海PTA项目72m超长件脱水塔运输至吊装地点的工作方法。

Zhuhai Project needs to transport 72 meter long dewatering tower to installation site This task is completed successfully by two 400t trailers which are equipped with one 200t slewing table each and safe secured facility .

介绍了UD-63尼桑40吨半拖挂车更新改造、废物利用的全过程，并对发动机更新、传动系统配置，供气及冷却系统改装等技术问题进行了详细论述。

The whole process of alteration and innovation to the UD-63 NISSAN semi-trailer is introduced , as well as discussed the related technical problems on the renewal of engine , the disposition of transmission system and so on .

采用参数化建模方法建立了60t重型半挂车车架有限元模型，采用曲棱四面体等参单元比传统方法提高了建模效率和可修改性以及计算精度。

In this paper , Parameter Variable technique is used to establish finite element model for trailer frame of 60 ton heavy transport truck , and 10-Node Tetrahedral Structural Solid elements are used for FEM mesh , which greatly improves building efficiency , revisability and of model than tradition methods .

煤矿井下调度绞车挂车数的测定

To Determine Trailer Numbers of Underground Car Hauler in Coal Mine

以跨运车替代拖挂车的集装箱码头工艺方式

Container Terminal Technology Applying Straddle Carrier Instead of Truck - Trailer

提高超重型低平台挂车装载质量的方法

Method of Increasing Loading Mass of Super Heavy Low Platform Trailer

增加挂车品种满足运输需要

Increasing the Variety of Trailers to Meet the Requirements of Transportation

压缩天然气运输半挂车的结构特点及安全措施

Structure Characteristic and Safety Precautions of Transporting Compressed Natural Gas Semi-trailer

如何提高轮转向全挂车行驶稳定性

How to Improve Running Stability of the Wheel Steering Full Trailer

挂车或畜拉车连接装置机车车辆弹簧悬挂装置

Coupling device for trailers or animal-drawn vehicles locomotive and car suspension