挂具

气门高效镀铬挂具的设计与应用

Design and Application of Efficiently Plating Rack for Valve Chrome Plating

介绍了该挂具的设计、制作、使用及维护。

Design , manufacture , operation and maintenance of this rotary rack were introduced .

根据挂具设计的基本原则以及实验所用塑料零件的实际形状设计摘要了电镀挂具，并利用现有设备进行改造进行Ni一siC复合镀。

A new rack was developed according to the principle of rack designing and actual shape of the plastics part . The equipment available was reformed for Ni-SiC composite plating .

电镀挂具退镀液的研究进展

Progress of the Solutions for Stripping Metal Coatings on Plating Hangers

研制出一种用于圆桶形工件镀铬的旋转挂具。

A rotary rack for chromium plating on surface of cylindrical articles was developed .

阳极氧化挂具的设计与应用

Design and applications of special racks for anodizing

该挂具制作简单，能提高镀层厚度的均匀性。

This rack is easy to produce , and improves thickness uniformity of electrodeposits .

矿用回柱器斜拉自紧挂具的研制

Development of oblique pull and self-taut hanging tool using in the mine 's prop drawer

认为电镀行业应加强对前处理、镀层匹配、挂具选择的重视。

Pretreatment , deposit matching and choice of rack must be emphasized in author 's opinion .

小扳手电镀挂具的改进

Modification of Rack for Electroplating Spanners

该机械采用挂具形式安装于自卸汽车之上，具有装拆方便，作业效率高，安全可靠的特点。

This machine is mounted on dump truck , and has characteristics of easy mounting , high efficiency , safty and reliable .

挂具互相干涉；（4）由于生产节拍快，使用无色的底漆容易造成漏喷或喷涂不均。

Mutual interference of plating rack ( 4 ) skip spraying and ununiform spraying because of using colourless primer , and rapid production tempo .

介绍一种适合回柱器斜拉特点的自紧挂具，阐述其结构特点及使用效果。

The paper introduces a self_taut by hanging tool which is appropriate for oblique pull characteristic of prop drawer , structure characteristic and using effect are expounded .

阐述钛的抗腐蚀性能和电镀工业使用钛制品如阳极网篮、挂具、加热器等时要注意的问题。

Corrosion resistance of titanium and some hints for application of titanium products such as titanium anode baskets , racks and heaters in electroplating industry are described .

分析了电磁阀本体黑色磷化工艺存在的问题，包括磷化质量不稳定，工艺不完善，挂具设计不合理、后处理质量低等。

The existing problems of black phosphating process for solenoid valve were analyzed , including unstable phosphating quality , imperfect technics , incongruous rack design and low post-treatment quality .

对于自行车中小零件的电镀，也介绍了一些专用滚镀机的概况，并对小零件吊镀挂具的设计和制造，提出了一些应该注意的地方。

As for the medium and small parts of the bicycle , the special barral plating machines are introduced and the notes for design and manufacture of the rack are presented .

另一重要产品为热洁炉，又名脱漆炉，主要用于静电喷涂挂具及返工件的处理。

Moreover , another important product is the hot cleaning furnace , which is also namely paint stripping furnace , are mainly for treating electrostatic spray racks and work-pieces to be reworked .

通过去掉象形阳极并改善挂具设计等手段，使产品成品率由40%提高到95%。

Thus the shape-imitation anodes were replaced and the design of the hanging unit was modified , which helped to increase the yield of the Cr-plated steel collars from 40 % to 95 % .

产品广泛应用于不锈钢标准件、链条、厨房卫浴、家私拉手、栏杆护手、电镀电解挂具、食品、电子、石油、建筑装饰等领域。

Our business range covers stainless steel ball rod , angle iron , light circle , hexagon rod , square rod , cold-drawn flat steel , straight bar , and stainless steel wire , etc.

设计了一种新的挂具并制作出了样件。经现场安装调试测试，挂具转动顺利平稳。其次，对整个流水线的传动系统（包括工件车牵引机构和工件自转系统）进行了仔细分析研究。

After identified these problems , a new plating rack has been designed and a prototype has been manufactured . Secondly , the entire pipeline transmission system ( including the drawing mechanism of work-piece-carrying-vehicle and the rotation system of work-piece ) .

草酸阳极氧化、硬质阳极氧化处理工艺电流密度大、电压高、产热量大，必须采用压缩空气不断搅拌槽液，由此可能导致工件与挂具接触不良，引起工件烧伤和报废。

High current density and voltage used in oxalic anodizing and hard anodizing process cause quantities of bath heat . Therefore air agitation is necessary which probably results in bad contact of the workpieces with the racks , and consequently produces burned and rejected workpieces .