应变状态

yìnɡ biàn zhuànɡ tài
  • Strain state;state of strain
应变状态应变状态
  1. 不同晶面与应变状态下Si/Ge应变异质界面的价带能量不连续性

    Valence-band offsets at st / ge strained heterointerfaces under different strain conditions

  2. 将它用于测定平面应变状态裂纹的应力强度因子K1,K2,获得了满意的结果。

    We can get a satisfactory solution in determining stress-intensity factors K_1 , K_1 of plane-strain cracks by applying this developing method .

  3. 不同应变状态下超晶格InAs/GaAs的电子结构

    Electronic Structures of Strained-layer Superlattices InAs / GaAs Under Different Strain Conditions

  4. 研究了2091Al-Li合金平面应变状态和体应变状态的超塑性成形后时效动力学特点。

    In this paper , the aging dynamic characteristics of 2091 Al-Li alloy after superplastic forming at plane and volume strain states have been investigated respectively .

  5. 平面应变状态下广义Mises准则参数特性

    Study on the Parameters of Generalized Mises Criterion at Plane-strain Condition

  6. 在沉积温度低于500℃时,制备的ZnO薄膜处于压应变状态,而750℃时沉积的薄膜表现为张应变状态。

    The films deposited below 500 ℃ are in the states of compressive strain while the film deposited at 750 ℃ is in tensile .

  7. 采用二维和三维非线性有限元分析方法,研究了六库水电站RCC纵向围堰堰基应力应变状态和稳定性。

    The stress-train of longitudinal cofferdam foundation of Linkou hydropower station are studied by 2D and 3D non-liner finite element method .

  8. 考察了平面应变状态下广义Mises准则参数表达式的基本特性。

    Numeric analysis on the characters of generalized Mises criterion at plane-stress condition has been done in this paper .

  9. 就疲劳强度校核在考虑螺纹的基础上建立了螺栓的CAD实体模型,并采用接触分析法,对螺栓的应力应变状态进行了有限元计算分析。

    The method of fatigue strength check was based on a CAD bolt model with thread . Contact finite element analysis of cylinder head bolt was carried out to study the state of stress and strain .

  10. 研究发现:表面吸附原子导致的Cu基体晶格畸变的范围可多达10个原子层,同时引起了基体表面应变状态与局域应力的非均匀分布。

    The results show that , the Cu adatom may have an impact on the substrate as deep as 10 layers and will lead to ununiformity of the distribution of surface strain and local pressure .

  11. 通过构筑PM空间密度函数,求出饱和岩石的应力应变状态方程,并模拟了其轴向应变径向应变滞后回线。

    Through constitution of PM space density function , the stress-strain state equation for saturated rocks has been defined and the hysteresis loops of axial stress-radial stress has been simulated .

  12. 借助有限元软件ANSYS,通过数值计算,可获得起爆瞬间,在结构自重作用下引起的爆破切口支撑部的应力与应变状态,因而,可分析出爆破切口长度较安全的取值范围。

    By means of finite element software ANSYS , stress distribution along the support part of blasting cut under the weight of the chimney could be obtained through numerical calculation and safer range of blasting cut length could be got .

  13. 分析表明,平面应变状态下广义Mises准则会出现中主应力系数小于0的不合理情况,这可能就是导致预测与试验结果之间不一致的原因之一。

    It is found that the coefficient of intermediate principal stress is smaller than 0 at plane-stress condition , which maybe one of the possible reasons leading to the numeric analysis result inconsistent with the testing result when the generalized Mises criterion used .

  14. 运用ADINA有限元程序对微型钻头的结构和工作应力应变状态进行了分析,所得结论对微型钻头的设计和使用有一定的指导意义。

    By using the finite element method ( ADINA ), the structure of micro drills and strain stress state in the body of the drill during the drilling process are analyzed . Given conclusion has great meaning to the design and application of micro drills .

  15. 结合均匀材料裂纹结构应力场解的研究成果,讨论了平面应变状态下,焊接接头裂端应力场的J-Q双参数描述方法。

    Based on the results of the solution of stress - strain yield of homogeneous materials containing defects , the double - parameter J - Q method used to welded joints on the plane strain condition is analyzed in this paper .

  16. 平面应变状态下的混凝土变形和强度特性

    Behaviors of deformation and strength of concrete under plane strain condition

  17. 平面应变状态下土体的软化特性与本构模拟

    Softening characteristics of soils and constitutive modeling under plane strain condition

  18. 粘塑性介质轴对称平面应变状态流变分析

    Rheological analysis of the visco-plastic mediums in axisymmetric plane statin state

  19. 应力-应变状态对应图在塑性加工中的应用

    Application of Metal Plastics Forming the Corresponding Diagram on Stress-strain State

  20. 平面应变状态的主应力及其对工程的影响

    Principal Stresses in Plane Strain State and Their Effects on Engineering

  21. 平面应力状态平面应变状态的复数分析方法

    Complex Number Analysis Method for Plane Stress State and Plane Strain State

  22. 非平面应变状态下的叠层厚壁筒

    The Laminated Thick Walled Cylinder in a State of Non plane Strain

  23. 平面应变状态下基于统一强度理论的土压力计算

    Earth pressure theory based on unified strength theory under plane strain state

  24. 拉压平面应变状态下混凝土的强度准则

    Strength criterion of concrete under plane strain state with tension compression lateral stresses

  25. 与应变状态相关的岩体双重孔隙介质流-固耦合的有限元计算

    Fluid-solid coupling FEM calculation for double porosity rock material dependent on strain condition

  26. 工艺管振动应变状态的测试

    Measurement of Vibration Strain State of the Operation Pipe

  27. 挤压工艺轴对称状态与平面应变状态变形力之间的关系

    Deforming Force Relationship Between Axisymmetric State and Plane Strain State in Extrusion Technology

  28. 抗浮锚杆应力-应变状态的线弹性理论分析

    Linear elastic analysis of stress-strain state of anti-float anchor

  29. 高速旋转构件应力应变状态的确定

    Determination of Strain-Stress Distribution for High Speed Rotating Structures

  30. 面内异性材料的应力和应变状态分析

    The Stress and Strain Analysis of Planar Anisotropic Materials