导向板

  • 网络Guide plate;Deflector
导向板导向板
  1. 拆卸导向板处的固定夹。

    Remove securing clip at the deflector .

  2. 将接合到导向板上的支架中,并确保它安装正确。

    Engage the into the bracket on the deflector and make sure it is fitted correctly .

  3. 旋风除尘器弧形导向板技术实验研究

    Experimental Study on Arc Board Guiding Gas Direction of Cyclonic Precipitator

  4. 泛方向导向板空间变形公共空间导识系统设计中的人文关怀

    Importance of Human Culture in the Design of Public Space Guiding System

  5. 滚压式污泥脱水机刮刀导向板结构分析

    Structural Analysis of Scraping and Guide Plate Used in Rotary Press Filter

  6. 将导向板和调整器钢缆安装到锚销上。

    Install guide plate and adjuster cable on anchor pin .

  7. 粉末冶金射钉机导向板

    PM Guide Plate in a Nailing Machine

  8. 导向板固定于壳体内中部,导向板位于活塞固定板下方;

    The guide plate is arranged on the lower part of the plate for fixing the piston group .

  9. 导向板液压模架平面压边精冲模设计制造导流板,流体导向叶片

    The Design and Manufacture of Fine Blanking Die for Plane Blankholder on Hydraulic Die Carrier of Guiding Plate

  10. 采用带导向板的轴流式圆锥脱粒滚筒,增强了脱粒能力,减少了种子损伤。

    Oriented with a cone plate axial threshing cylinder to enhance the capacity of the threshing and reduce seed damage .

  11. 以弯管件为例,介绍了杠杆式切口模的结构及工作过程,并详细介绍了左、右导向板的设计方法及其设计时应注意的问题。

    The design characteristics and the manufacturing technology of the notching block of the die for the shutter sheets were introduced .

  12. 在烟支含梗签率、风压、负压一定的情况下,卷烟等级升高梗导向板高度随着增加;

    The height of stem guide plate increases along with the higher cigarette class in the condition of the fixed stem sliver percentage as well as fixed air pressure and vacuum volume .

  13. 设计了一种用于气体净化的平板式固定床反应器,介绍了该反应器的结构、工作原理以及网板、导向板、气体收集箱、过滤盖等组件的功能。

    A flat plat fixed-bed reactor for gas purification was designed , its structure , working principle , function of screen plate , guide baffle , gas receiver and filtration cap were introduced .

  14. 超临速磨机的运动学分析研究结果表明,钢球介质在一个运动循环周期内主要经历了三个运动阶段,即匀速圆周运动阶段、钢球介质在导向板表面无摩擦运动阶段和抛物线运动阶段。

    The results of the kinematics research of the ball mediums show that the ball mediums in the mill go mainly through three steps : uniform circumference motion , no friction motion on the surface of the guiding board and parabola motion .

  15. 模型实验中还特别包含了6种不同模型工况,用以考察垂荡板和开孔的龙骨立管导向板等薄板对平台水动力与运动性能的影响。

    Six different model cases are employed in the model test to investigate the effect of various horizontal thin plates attached to the model such as heave plate and guide plate at keel with hole on the hydrodynamics and motion performance of platform .

  16. 全导向楔板减少阀座表面的磨损。

    Fully guided wedge reduces wear on seating surfaces .

  17. 该安全销可穿过安全销导向孔板插入安全销固定孔板的销孔中;

    The safety pin can penetrate a safety pin guide pore plate and insert the pin hole of the fixed pore plate of the safety pin .

  18. 高负荷导向垂直栅板的研究(Ⅰ)&实验测定及关联

    Study on guide vertical grid tray with high loading capacity (ⅰ) & experiment and correlation

  19. 导向浮阀塔板和F1型浮阀塔板的比较

    Comparison of Directed Valve Trays and F 1 type Valve Trays

  20. 新型NS导向提馏塔板工业应用

    Industry application of new type NS guided stripper tray

  21. 应用空气-水-CO_2系统,测定了梯形导向浮阀塔板的效率。

    The plate efficiency of the trapezoidal directed valve tray based on the desorption of CO_2 has been determined using the air-water-CO_2 system .

  22. NS导向提馏塔板的流体力学性能

    Hydraulic Performance of NS Stripper Plate

  23. 介绍了NS导向提馏塔板在胜华炼油厂15万t/a常压塔上的工业应用情况。

    The application of NS guiding stripper in a 150000 t / a distillation column of Shenghua Refinery was introduced .

  24. 研究结果表明:全通导向浮阀塔板的压降和漏液比F1浮阀小,雾沫夹带量略高于F1浮阀。

    The results show that super float valve tray possessed less total pressure drop , lower weeping and more entrainment than F1 valve tray .

  25. 在丁二烯装置第&萃取精馏塔内,应用组合导向浮阀塔板代替F1型浮阀塔板。

    The combination directed floating valve trays have been used in the first extractive distillation column of butadiene unit to replace the F1 type valve trays .

  26. 对丁二烯装置第二精馏塔进行了技术改造,采用导向浮阀塔板代替原有的F1型浮阀塔板。

    The second distillation column of butadiene plant is changed used the guide float valve column plate instead of original F_ ( 1 ) type float valve column plate .

  27. 应用空气-水-CO2物系,测定了导向浮阀塔板的效率,并与F1型浮阀塔板进行了比较。

    The plate efficiency of the directed floating valve trays was determined using air water CO 2 system . Both the hydrodynamics and plate efficiency were compared with type F1 floating valve trays .

  28. 在1600mm×400mm的矩形塔内,分别利用空气水和空气水CO2系统,对组合导向浮阀塔板的流体力学和传质性能进行了实验研究。

    The hydrodynamic and mass transfer characteristics of combination directed valve trays have been studied in 1600mm × 400mm rectangular laboratory column by using air water and air water CO2 system , respectively .

  29. 1992年4月,锦西炼油化工总厂与华东化工学院合作,投资50万元,将一套原油蒸馏装置常任塔的原F1型浮阀塔极改为导向浮阀塔板。

    In April 1992 , Jinxi Complex worked together with the Insti - tute and invested 50 × 10 ~ 4 yuan ( RMB ) in the crude distillation unit , changing the original F1 float-valve tray in the atmospheric column into guided-float-valve tray .

  30. 为增大导向浮阀塔板对液体流动的推动力,在1600mm×400mm实验塔内,利用空气-水系统,对B型导向浮阀塔板进行实验研究。

    In order to increase the driving force to the liquid flowing on the tray , the B-type directed valve trays were studied experimentally in a rectangular column with a 1600 mm × 400 mm cross section by using air-water system .