实际控制

因此，对非线性时滞系统设计H∞滤波器不仅具有重要的理论意义，也是实际控制系统设计和应用的迫切需求。

Therefore , the filter study for time-delay systems not only has great theoretical significance , but also the urgent need for the actual control system design and application .

如果您在构建典型的Web应用程序，通常需要一个名为/admin或/admintool的部分，用于包含所有允许实际控制和操作数据的管理。

If you 're building a typical Web application , you 'll generally have a section called / admin or / admintool that houses all the administrative screens that allow actual control and manipulation of data .

并在实际控制过程中采用PID算法，实现了足球机器人软件控制与硬件的结合。

It adopts PID arithmetic to realize the combination of hardware and software .

通过各算法的实际控制效果比较，提出了专家系统PID控制方案&利用专家系统知识库输出在线修正PID参数。

A PID control method based on Expert System is studied and proposed by comparing several arithmetic .

针对多晶硅生产时对温度的控制要求，比较并获得实际控制效果较好的PID控制方案。

For polysilicon production of temperature control requirements , compare and gain practical control effect and better PID control method .

本论文运用满意控制理论进行PID控制设计研究。在实际控制工程设计中，往往要求系统的多个性能指标在一个允许的范围内，而不是唯一的最优值。

This dissertation mainly deals with the problem of Satisfactory control for PID control design that develops one synthesis design method with constraints of multi-performance indices .

针对工业过程和实际控制对象的慢时变非线性的特点，设计了一种预测模型的单神经元PI控制器。

A single neuron PI controller with predictive model is designed according to nonlinear systems of many industry processes and practical plants .

本文还比较了EQR和模糊PID两个控制器对模型系统的仿真和实际控制曲线图，分析了各自的性能优势。

In this paper , we also compare curves of the LQR controller to curves of the fuzzy-PID controller , and do analysis of their performance advantages .

在供热系统的自动控制中应用这一设计思想，实际控制效果表明，用这一方法所设计的控制系统比常规的具有固定参数的PID控制具有更好的性能。

The practical control effect shows that the control system that adopts the fuzzy PID controller has better performance than that of the traditional PID control system .

本文针对冶炼工艺对电极控制系统的要求，提出了一种模糊自适应PID控制方法，并成功地应用于电极的实际控制。

According to the requirement of smelting process for electrode control system , a fuzzy adaptive PID controller is presented and has been applied to practical control of electrode successfully .

对比实验结果表明，非线性PI调节器的实际控制效果优于线性PI调节器，但是没有仿真效果好。

Contrast test results prove that the nonlinear PI regulator performs better than the linear PI regulator , but not as good as the simulation results .

论文对控制算法的稳定性和鲁棒性进行了数学证明，并通过Matlab仿真和建立综合控制实验系统验证了系统的实际控制能力。

The stability and robustness of control algorithms are proved mathematically and the simulation are carried by Matlab software , and the final force is testified in general controlling experimental system .

目前已有的多种具有PID参数自整定功能的智能调节器大多整定复杂并对实际控制过程有影响。

There are a variety of PID controllers with self-tuning function at present , but the tuning methods of them are usually complicated and have bad influence on the actual control .

最后用串级双闭环PD控制器实际控制球杆系统样机，其主要参数满足满足实验教学要求。

Finally , Cascade Double Loop PD controller clubs is actual used to control the system , and its main parameters satisfy the requirements to meet the teaching experiment .

为考察MATLAB辅助设计下系统的实际控制性能，将整定后的PID控制参数及PI控制参数进行了上机实验，与仿真实验性能进行对比。

In order to investigate the actual performance of automatic control system under the MATLAB aided-design , by using the PID control parameters and PI control parameters to experiment , and compare to simulation performance .

从目前几种远程技术出发，比较各自的特点后，将简单易用的XMLRPC应用到控制系统中，实现了一种新的远程控制方法，并具体介绍了相应的实际控制系统。

After comparing some current technologies widely used in distributed computer systems , an XML-RPC is used to realize a new remote control method and the corresponding actual control system is presented in this paper .

基于实际控制对象模型的不确定性，本文运用鲁棒控制理论，对PID控制系统的鲁棒性进行了讨论，提出了鲁棒PID控制器的一种设计方法。

Based on the uncertainty of the model of the plant , the robustness of the PID control system is discussed by using the robust control theory , and a method of the design for robust PID controller is stated .

根据发动机负荷特性试验结果，验证了在此供油提前角的情况下，EGR控制系统的实际控制效果达到最佳。

It is proved by test results of load performance that the actual control effective ness of the EGR control system is optimum under this fuel advance angle .

本文结合工程实例，详细论述了应用PROFIBUS-DP技术到实际控制模块化加工生产系统中的应用过程。

The paper discusses the application of profibus-dp technology combined with the modules of automatic production system , which I take part in designing distribution station and testing station .

在CCS开发平台上，编写了脉冲信号的计数，实际控制电压曲线的计算和装载，控制算法的比较和改进，RS232协议和CAN协议下的数据通信，以及键盘和显示的驱动程序。

On CCS developing platform , several procedures were written , such as impulse counting , data communication in RS232 protocol and CAN protocol , as well the keyboard and display monitor .

国内MBO应该表述为以管理层为主的、与股权激励相联系的通过融资对目标公司部分股权进行收购并意在获取公司实际控制权的收购行为。

The MBO in China can be defined as the buyout process carried out by managers . It is related with the shareholding inspiration and aims at obtaining the control of the target enterprise by means of financing .

基于RTDS配置各种实际控制保护装置，建立了高压直流控制保护系统、高压线路保护装置、大电网安全稳定控制系统等三大试验平台。

HVDC control and protection system test platform , high voltage line protection device test platform , and large electric network security and stability control system test platform are established based on RTDS .

发现在一定精度范围内TE波与TM波的相位差能够在一段较大的槽深区域满足设计要求，从而降低了实际控制刻蚀深度的难度。

We find phase difference between TE wave and TM wave can satisfy designed requisition at some accuracy in a long span of groove depth which can reduce practical difficulty of etching groove depth , but papers issued before always require strict etching groove depth .

经过本文的分析和仿真研究，可以看出对于在复杂工况下工作的拖缆机来说，采用ANFIS控制器无疑是一个很好的选择，可以满足实际控制系统的需要。

By analyse and simulation study , it can be made out that to winch tugboat working at the complex condition , ANFIS is an advisable choice undoubtedly , and it can satisfy the need of control system .

对无约束动态矩阵控制（DMC）算法进行了改进，提出了一种新的DMC控制算法，即用遗传算法对DMC的设计参数进行在线寻优，由优化结果来计算实际控制作用。

A new algorithm is proposed for the design of unconstrained dynamic matrix control ( DMC ) . The tuning parameters of DMC are optimized on line via genetic algorithms . The control action is computed by using the optimum parameters .

本文对AGC系统中的轧机特性问题进行了研究，介绍了本钢热连轧AGC系统中使用的轧机特性回归模型和参数估计方法，并给出实际控制效果。

This paper studies the problem of rolling mill characteristics , and presents the regression model and parameter evaluation method of rolling mill characteristics used in the hot continuous rolling AGC system in Benxi Iron and Steel Company . The actual results of control are given .

几乎所有的实际控制系统都受到外部扰动的影响。

Almost all practical control systems are affected by external disturbances .

实际控制系统中经常存在各种各样的约束条件。

In real control systems there may be various constraints present .

时滞普遍存在于实际控制系统中。

Time delay is common phenomenon in practical control systems .

使用该算法定位了实际控制工程中的故障；

This algorithm detects a practical project ′ s faults .