喷涂

纯Mo、Al2O3喷涂层的结合强度研究

Study oa Bonding Strength of Pure Mo , Al_2O_3 Flame Plating

是装潢，喷涂，油漆遮蔽的理想胶带。

Be the ideal adhesive tape for decoration , flame plating , paint block .

用喷罐来喷涂，不好对付的物品也能轻松搞定。

An aerosol spray will make short work of painting awkward objects

冷喷涂Cu粒子参量对其碰撞变形行为的影响

Effect of parameters of Cold Sprayed Cu particles on its impacting behavior

加和函数及其在Ni基喷涂材料硬度研究中的应用

Study on Ni-based Spraying and Coating Material Hardness Via Additive Function

彩色显像管AD喷涂机的设计与实现

The design of AD spraying machine of color picture tube

醇酸清漆超临界CO2喷涂工艺的研究

Research of Supercritical CO_2 Spray Technology for Alkyd Varnish

PLC技术在铸机喷涂系统中的应用

Application of PLC in Casting Machine Smearing System

反应热喷涂Al2O3陶瓷涂层在造纸设备上的应用

Research on Reactive Flame Spraying Ceramic Coating in Papermaking Machine

微束等离子喷涂工艺条件对Cu涂层组织和性能的影响

Effect of Spray Conditions on the Microstructure and Properties of Micro-Plasma Sprayed Cu Coating

基于CCD图像处理技术的等离子喷涂粒子温度研究

Investigation for particle temperature in plasma spraying based CCD imaging monitor technology

火焰喷涂工艺对Al2O3陶瓷涂层的影响

Effects of Flame Spraying Process on Al_2O_3 Ceramic Coating

用冷喷涂法制备PTC陶瓷的Al电极

Al Electrode of PTC Ceramics Prepared by Cold Gas Dynamic Spray

等离子喷涂工艺稳定性对Cr2O3涂层结合强度的影响

Effects of fluctuations of plasma spraying parameters on tension bonding strength of cr_2o_3 coating

SHS火焰喷涂Al2O3基复相陶瓷涂层机理

Mechanism of SHS reactive flame spraying al_2o_3-based multiphase coating

超声波振动车削加工等离子喷涂Al2O3+13%TiO2陶瓷涂层

Used Ultrasonic Vibration Cutting to Machining the Al_2O_3 + 13 % TiO_2 Ceramic Coatings by Plasma Spraying

电弧喷涂控制系统研究之一&数学模型的建立及PID控制器设计

The research of arc spraying control system ( part 1 ) & Mathematical model based and PID controller designed

复合纳米Ag，Ce/TiO2光催化自洁涂料的超临界CO2喷涂研究

Study on supercritical CO_2 ( SC-CO_2 ) spraying of nanocomposite Ag , Ce / TiO_2 light-catalyzed self-cleaning coatings

电弧喷涂Al涂层应用到桥梁栓接面的防滑耐蚀涂层。

Arc sprayed Al coating was applied as anti corrosion and anti silding coating for bolting surface of railway steel bridge .

电铸与电弧喷涂相结合制造EDM电极

Electro - forming combining with arc-spray to manufacture EDM electrode

介绍了一种采用PLC控制器对等离子喷涂工艺流程进行监控的应用实例。

To monitor the plasma spray processing by PLC controller , an application example has been presented in the present paper .

等离子体喷涂TiO2涂层晶向的价电子结构分析

Valence electron structure analysis of crystalline orientation in plasma-sprayed tio_2 coatings

基于RP技术的金属电弧喷涂模具制造的误差分析

The Errors Analysis of Arc Spraying Mould Manufacture Based on Rapid Prototyping

方法：在4种载体表面，按不同剂量（mgai/m~2）喷涂一定药液，采用强迫接触法观察其持续效果。

Methods : Spray the insecticide at different doses ( mg ai / m2 ) on 4 kinds of surfaces of carriers .

低气压等离子喷涂TiO2涂层结构的研究

A study of the structure of low pressure condition plasma sprayed tio_2 coating

本研究分析了在低气压等离子喷涂条件下，TiO2涂层的结构受等离子弧喷涂过程中氧分解量所影响。

The structure of low pressure condition plasma sprayed TiO_2 coatings was investigated .

用基于快速原型制模技术（RP）的等离子喷涂制模技术制造不锈钢模具。

The stainless steel rapid mold is manufactured by RP and plasma spray technology .

研究了采用等离子喷涂法制备Al2O3涂层与Al2O3/TiO2复合涂层，以及喷涂前后涂层中相变及涂层的腐蚀行为。

The phase transformation in the plasma-sprayed Al_2O_3 and Al_2O_3-TiO_2 coatings and their corrosion behavior were studied .

采用电弧喷涂制备了Al涂层、Zn涂层和AlZn伪合金涂层，在Falex试验机上测试了3种涂层的磨损性能。

The wear performance of arc sprayed Al , Zn and Al Zn pseudo alloy coatings was investigated using falex tester .

方法：纯度为99%的川芎嗪单体、甲基丙烯酸甲酯共聚物和聚乙醇酸均匀喷涂于金属裸支架上，制成含川芎嗪200μg的涂层支架。

Methods : Bare metal stents were uniformly sprayed painting with Tetramethylpyrazine monomer ( 200 μ g )、 methyl methacrylate copolymer and polyglycolic acid , and prepared Tetramethylpyrazine-eluting stents .