光学相机

  • 网络optical camera
光学相机光学相机
  1. 对分子污染高度敏感的航天产品,如光学相机、CCD成像系统等,真空烘烤是有效的污染控制手段。

    The vacuum bakeout is an efficient methode for contamination control of spacecraft payload with high sensitive contamination , such as optical camera , CCD imaging system .

  2. 给出了一种焦距测试方法,用于测量数码相机电荷藕合器件(CCD)与传统光学相机相等效的焦距。

    This paper proposes a new method for estimating the equivalent focal length of digital camera ( DC ) charge-coupled device ( CCD ) to the traditional optical camera .

  3. 基于有限元的空间光学相机SIC主镜设计研究

    Research and Design on the SIC Primary Mirror of a Space Visible Camera Based on Finite Element Method

  4. 在原有的RC-310眼底血管造影机基础上购置一套数字化摄像系统,将原来配备的普通光学相机改造成数字化成像影机及打印系统。

    Basing on original Rc-310 eyeground fluorescent light angiography machine , we purchased a set of digital photographic system .

  5. 天基光学相机动态目标跟踪算法研究

    Study on Optical Spaceborne Track Algorithms for Dynamic Motion Target

  6. 在轨光学相机探测图像数字仿真系统的设计与实现

    Design and implementation of digital simulation system for detecting image of orbiting optical camera

  7. 信噪比是空间光学相机系统的主要设计指标之一,可用于表征相机的辐射性能。

    The SNR is one of the primary parameters in optical sensor system , which can be used to reflect radiation performance of remote sensor .

  8. 本文阐述了数码相机与普通光学相机相比较的优点及其结构特点,提供了正畸临床对患者面(牙合)像摄影时选择数码相机的主要性能指标和相应的辅助器材。

    The advantages of digital camera and its structural characteristics are compared with optical camera in this article . The main capability indexes and assistant equipments are explained .

  9. 航天光学相机是航天遥感中最重要的遥感器,像移速度矢量是光学遥感成像质量的重要影响因素。

    Space remote sensing camera is the most important remote sensor in space remote sensing and the image motion velocity vector is an important influencing factor to imaging quality of optical remote .

  10. 本文对基于光学相机的自主交会相对导航、闭环控制协方差分析、多目标最优交会轨迹设计和近距离交会制导与控制等技术进行了研究。

    Based on measurements of optical camera , the methods of relative navigation , closed-loop covariance analysis , optimal multi-objective rendezvous trajectory design , and guidance and control of close range rendezvous are researched .

  11. 该方法利用光学相机和激光测距仪测量值构建着陆点相对着陆器的矢量信息,结合着陆器的姿态信息确定着陆器的位置。

    The method is to use optical camera and laser range-finder to construct the vector information of the landing site related to the lander , with whose attitude information its position can be determined .

  12. 航空数码相机能够将图像以数字信息的形式存储,转移,并且可以实时地与地而通信,很好的解决了光学相机拍摄耗时长、后序工作烦琐等缺点。

    Aerial Digital Camera ( ADC ) can store and transfer images with digital form and communicate with earth stations in real time , which overcomes the shortcoming of optical camera in its time-consuming and fussy image generation .

  13. 系统通过改造传统裂隙灯生物显微镜的摄像光路,用数码相机取代普通光学相机,记录不同尺寸的放大图象,从而获得高清晰度数码图象。

    By refitting the photographic optical circuit of traditional slit lamp and replacing the original analog camera with digital camera , higher clearness digital images can be obtained in this system , when recording the enlarging images in different dimensions .

  14. 为了探索超热电子束的传输特性,利用光学CCD相机在靶背法线方向测量了光学渡越辐射积分成像图案。

    For exploring the transport characteristic of hot electron bunches , the integrated image pattern of optical transition radiation were measured at the normal direction of the rear side of targets employing the optical CCD camera .

  15. 利用光学CCD相机和OMA光学多道分析仪,分别在金属箔背表面法线方向测量了光发射的积分成像光谱和散射光光谱。

    The integrated image spectrum and scattering light spectrum of optical emission at normal direction from rear-side of a metallic foil were measured , employing optical CCD camera and OMA optical multi-channel spectrometer .

  16. 光学条纹相机扫描速度和非线性的测试

    Measuring sweep speed and sweep nonlinearity of optic streak camera

  17. 星载光学遥感相机图像模拟源的设计与实现

    Design and Realization of Image Simulator of Space Vehicle Borne Optical Remote Sensing Camera

  18. 利用光学导航相机以及星敏感器,通过测量星光信息以及天体边缘的信息,进行了自主光学导航方案的设计。

    An autonomous optical navigation scheme was designed using the star light data and body edge data which is measured by star sensor and optical navigation camera .

  19. 采用波长为0.35μm的高功率激光脉冲聚焦辐照楔形铝靶,用光学条纹相机观测靶背面冲击波加热发光的特性。

    Experimental records of the light emitting from heating luminescence at the rear surface of wedge shaped aluminum target were obtained by an optical streak camera . The target was irradiated by a focused high power laser beam with 0 35 μ m wavelength .

  20. 其中光学箱是相机光学系统和探测器的载体,同时防止来自光学箱外部的红外热辐射;

    The optical box is the platform of optics and detectors , and it prevents thermal emission from outside effectively .

  21. 成果将降低近景影像技术对光学量测相机的依赖程度,拓展数字影像技术的工程应用。

    The outcome result will reduce the probability the close-range technology relies on optical metric cameras , and will widen the applicability digital imagery technology used in engineering .

  22. 报道了在20TWfs激光器上采用电子磁谱仪和光学CCD积分成像相机分别对激光固体靶相互作用在靶背方向产生的超热电子能谱及其光学渡越辐射进行的测量。

    This paper reports hot electron energy spectrum measured with electron spectrometer , and Optical Transition Radiation measured with optical time-integrated image of CCD during the interaction of laser-solid target in targets at the rear-side radiation of laser on 20 Terawatt femtosecond laser facility .

  23. 对系统的一些关键组成部分(如光源、光学镜头、CCD相机及图像采集卡等)的结构和性能参数进行详细的讨论,并给出了所选产品的型号及其技术指标。

    The structure and parameter of some crucial parts , such as light source , optical lens , CCD camera and image gathering card , are discussed in detail , as well as the types and technical parameters of the productions selected . 2 .

  24. 该系统由闪烁体及鼻锥部分、光学系统和条纹相机系统三部分组成。

    The system is composed of plastic scintillator and nose cone , an optical system and streak camera .

  25. 像素、存储、光学及数码变焦相机体积和成本等因素比较。

    Pixels , memory , optical and digital zoom , camera size and cost are all factors to compare .

  26. CASCAM机械系统主要包括光学箱和真空箱以及致冷设计,光学箱是相机光学系统和探测器的载体,同时防止来自光学箱外部的红外热辐射;

    The system mechanical design include optical box , vacuum box and cooling system . The optical box is the platform of optics and detectors , and prevent from outside thermal emission effectively .