元分析

基于元分析的国际知识管理研究特征分析

Analysis of the Characteristics of International Research of Knowledge Management Using Meta-analysis

单一被试实验与元分析技术

The Single Subject Research and Meta-Analysis

把动坐标迭代法应用于下部钻具组合（BHA）的非线性有限元分析。

Moving-coordinate reiterative method is used for non-linear finite analysis of BHA .

并使用有限元分析软件对不同微桥进行结构分析，以比较其稳固性

Its distributing of stress is simulated by finite element analysis software order to compare their fixedness .

任意形状的H面矩形波导不连续性的有限元分析

Finite-element analysis of H-plane discontinuities of arbitrary shape in a rectangular waveguide

H面波导不连续性的边界元分析

Analysis of H-plane Waveguide Discontinuities Using Boundary Element Method

异形内R型螺栓头部支承面压力有限元分析

FEM Analysis of Bearing Pressure at Bolted Joint for the Heterogeneous Bolt with the Internal Radius

用ANSYS软件对U形波纹管的有限元分析

The Finite Element Analysis to the U-shape Bellows by the ANSYS Program

输电铁塔ANSYS建模及有限元分析

Transmission tower ANSYS modeling and finite element analysis

碳纤维筋（CFRP）夹片式锚具的有限元分析

Finite Element Analysis of CFRP Tendons under Action of Wedge - type Anchorage

用有限元分析软件ANSYS对四分压电陶瓷管进行模态分析，得出该陶瓷管的前12阶谐振频率和模态振型。

Using the ANSYS software of finite element , modal analysis is executed and twelve steps harmonic frequency are obtained .

采用ANSYS软件对某高桩码头拟改建后的基桩桩力进行了有限元分析。

Software ANSYS was utilized to conduct FE analysis of the foundation-pile bearing capacity of the wharf to be renovated .

挠性抗回旋PDC钻头的有限元分析

Finite Element Analysis of Flexible Anti - Whirl PDC Bit

其主要工作和成果如下：（1）利用有限元分析法研究了W型和纤芯凹陷型剖面结构非零色散位移光纤的设计原理和传输特性。

The design principle and transmission properties of non-zero dispersion-shifted fiber with core-depressed and W type of profile are studied by finite-element method .

锅炉三维造型系统是锅炉CAD应用系统的子系统，三维实体建模是进行有限元分析和空间管路干涉检查的基础。

The solid modeling system is subsidiary to " Boiler CAD Application System " . 3D Solid modeling is basis of FEM analysis and pipe line interference check .

OpenGL图形库具有良好的3D图形生成功能，而科学计算可视化对于有限元分析软件是必不可少的部分。

OpenGL graphic database has an ideal function of generating 3D graphics , and scientific computation visualization is absolutely necessary for finite element analysis software .

同时给出了一个用大型有限元分析软件Marc来进行接触分析的实例。

At the same time , an example of finite element contact analysis is analyzed by Marc .

方法：利用螺旋CT扫描的方法，采用图像处理和有限元分析软件建立567及其支持组织的三维有限元模型。

Method : Established a 3-D finite element model of | 567 and their supporting tissues by means of SCT scanning technology and software of image processing and finite element analyzing program .

SOMA驱动桥桥壳有限元分析及强度校核方法

Finite element analysis and strength verification of SOMA drive axle casing on construction machine

基于ADINA的真空干燥机箱体结构有限元分析及改进

Finite Element Analysis and Improvement for Box Structure of Vacuum Dryer Based on ADINA

RPA卡环支持组织的三维有限元分析

The 3-Dimensional Finite Element Stress Analysis of the Supporting Tissues in the RPA Clasp

建立了相应的有限元分析模型，运用ANSYS非线性有限元分析法，对钢管内部设置加强环的节点进行了静载下的弹塑性分析。

Set up corresponding finite element and analysis models , use ANSYS non-linear finite element analytic approach , have set up the joints which ring-strengthened and carried on the static elastoplastic analysis .

方法：图像特征点提取用数字图像处理技术得到，利用Matlab进行单元自动划分，得到有限元分析数据。

METHODS : The contour points were obtained by using digital image process . The Matlab software was used to differentiate automatically the elements and nodes so as to get data for finite element analysis .

Mooney-Rivlin材料Ⅰ型裂尖场的有限元分析

Finite Element Analysis of Crack Tip Field in Mooney-Rivlin Material

进一步利用有限元分析软件MSC／NASTRAN建立了三个水泥输送泵车结构有限元优化模型。

Three structural FE model are established with the FEM based on MSC / NASTRAN . In the first optimization model , the exhaustive parameters are selected firstly .

通过solidworks软件能够建立精确的圆柱凸轮的三维模型，为有限元分析和动态仿真奠定了基础：（4）能够将设计结果转换为数控加工代码，为数控加工做好准备。

The system can set accurately up the three-dimension model by Solid Works , on which the finite analyses and the dynamic emulation are based ; ( 4 ) the system turns the result of design into NC code , which is prepared for the NC manufacturing .

采用动、静态相结合的采样方法考察了传感器阵列的检测能力，在动态实验中通过提取不同的特征值并利用主元分析（PCA）和聚类分析（CA）方法对数据进行了分析和识别。

Using static and dynamic sampling methods to exam the detection ability of the sensor arrays . Principal Component Analysis ( PCA ) and Cluster Analysis ( CA ) were used in the data analysis and pattern recognition .

建立了水梁的平面和三维实体模型，并利用ANSYS给出的有限元分析结果，确定了水梁产生裂纹的根本原因，即水梁的高度偏差和在高温交变载荷作用下的受力变形。

The planar and 3-D FEM models of the water beam have been set up . The water beam height deviation and deformation under alternating load at high temperature are the basic causes according to the ANSYS finite element model .

以新安江两等跨箱形混凝土拱桥为工程背景，采用大型有限元分析软件ANSYS建立三维有限元模型并对其进行动力特性分析，并用实桥脉动测试结果进行校核；

ANSYS was used to establish a finite element model of the box-shaped concrete arch bridge with two equal spans , and an analysis of dynamic property was preformed , and measured impulse data was used to verify the analysis result .

对背部开有不同深度、不同直径沉孔缺陷的平板表面采用恒定热流加热。使用有限元分析软件Ansys计算得到表面温度分布云图和温升。

Finite element analysis software Ansys , was used to calculate the temperature field of the plates with back sinking hole defects of different depth and diameter under constant heating condition , and surface temperature cloudy map and temperature rise were obtained .