插槽

  • 网络SLOT;socket;pci;AGP
插槽插槽
  1. 举例来说,XPSOne有一个内置的相机存储卡插槽,这一点就不同于苹果机。

    Unlike the Apple , for example , the Dell has a built-in slot for camera memory cards .

  2. 这些事件包括PCII/O适配器插槽的变化。

    These events include PCI I / O adapter slot changes .

  3. 主动脉动气流分选回收PC插槽中金属的实验研究

    Experimental Study of Metal Recovery of the PC Motherboard Slots by Active Pulsing Air Classification

  4. DB2缓冲池由数个插槽(slot)的连续的内存组成。

    The DB2 buffer pools consist of slots of contiguous memory .

  5. 对于每个活动的处理器插槽,都需要LUSocket许可。

    An LU Socket license is required for each active processor socket .

  6. LUSocket能够通过物理处理器插槽进行许可。

    LU Socket enables licensing by physical processor socket .

  7. 它只适用于可热插拔的PCI插槽。

    This is available for hot-pluggable PCI slots only .

  8. 方形插座:因为CPU是很敏感的,所以它的插槽是很复杂的。

    Square sockets : Because the CPU is so sensitive , its slot is very intricate .

  9. 插槽池允许双或三重站点使用唯一的IP特定的服务器上运行的数目地址。

    Socket pooling permits double or triple the number of sites to be run on a specific server with unique IP addresses .

  10. 可以将系统中的外围设备互连(Peripheralcomponentinterconnect,PCI)插槽单独地分配给一个逻辑分区。

    Peripheral component interconnect ( PCI ) slots in the system can be individually assigned to a logical partition .

  11. 它还有一个迷你SD卡插槽,扬声器,和世界的电话支持。

    It also has a Mini SD card slot , a speakerphone , and world phone support .

  12. 那么目前Corei5处理器所用的LGA1156插槽会不会也有类似的好运?

    Could the socket that plays host to Core i5 processors today enjoy similar longevity ?

  13. 在bladeBIOS中,确保没有禁用子卡插槽。

    In the blade BIOS , make sure you haven 't disabled the daughter card slot .

  14. 传统的激光打标控制器主要以单片机作为处理器,采用计算机主板的PCI插槽与计算机连接。

    Traditional laser marking controller generally based on MCU , and using PCI slots to connect with computer .

  15. 设置合适的LPAR以避免跨越多个芯片插槽边界。

    Size LPARs to avoid spanning chip socket boundaries .

  16. 预期的改进包括一个双核处理器、一个高质量显示器和一个前视相机以及一个SD卡插槽。

    Expected improvements include a dual-core processor , a higher-quality display , a front-facing camera , and an SD card slot .

  17. CF插槽大部分就是小一点的PCMCIA插槽。

    CF slots are just small PCMCIA slots , mostly .

  18. 本论文利用DSP和FPGA处理器设计一个图像处理电路板,该电路板以PCI板卡的形式安插在PC机中的PCI插槽中。

    This paper design a image processing system using DSP and FPGA processors , which is inserted in personal computer through PCI interface .

  19. sd和pcmcia脚本分别为SD和CF插槽提供了接口。

    The sd and pcmcia scripts provide the hooks for the SD and CF slots , respectively .

  20. 基于ISA插槽的多路定标器

    Multi - scaler based on ISA

  21. USB(universalserialbus)是为解决计算机外设种类的日益增加与有限的主板插槽和端口之间的矛盾而提出制定的。

    USB ( Universal Serial Bus ) is designed to solve the contradiction between the increasing peripheral devices and the limited interfaces of the main board of computers .

  22. 该频率源设计成基于计算机PCI总线的板卡结构,可以直接插入PC机的PCI插槽内。

    The frequency source is designed in such a way that it can be inserted into one PCI slot of a personal computer .

  23. 该系统克服了以基于PCI/ISA插槽的AD采样卡为实现手段的电测系统的缺点,抗干扰性和实时性好。

    This system overcomes the drawback of measuring system which adopts AD sampling card based on PCI / ISA socket and has better proformance in antijamming and realtime .

  24. 旁边的是VGA、麦克风和耳筒机的插槽,当然还有USB插槽了。

    The ports beside are normal VGA , mic and earphone ports , of course , one USB port , too .

  25. 有了这种能力,您就可以在操作系统正在运行时向一个可用的PCI插槽中插入一个新的PCI热插拔适配器。

    With this capability , you can insert a new PCI hot plug adapter into an available PCI slot while the operating system is running .

  26. 当从IVM删除设备时需要插槽号。

    The slot number is required when a device is removed from the IVM .

  27. 在硬件方面,系统通过插在PC机PCI插槽上的数字图像采集卡经数据线连接CCD摄像机实现对类圆图像的实时获取,进而利用PC机实现类圆的分割与识别。

    In the hardware , CCD camera , digital image acquisition card and PC are utilized to realize image acquisition , segmentation and recognition in real time .

  28. snn:这告诉IVM我们要使用一个特定的插槽号。

    S nn : This tells the IVM that we are going to use a particular slot number .

  29. 有限使用的插槽(LUSocket)&只用在InformixGrowthEdition上,这将在潜在包含多个核的物理插槽上允许许可。

    Limited Use Socket ( LU Socket ) & Available only on Informix Growth Edition , this allows for licensing on a physical socket potentially containing multiple cores .

  30. 通常是指运动控制器(开放式数控)或CNC功能模块插入到PC机总线插槽中,使用标准的硬件平台和操作系统。

    Usually it means that movement controller ( open CNC ) or CNC function module plugs into PC bus slot , and uses the standard hardware platform and operate system .