废气涡轮增压

  • 网络Turbocharging;exhaust gas turbocharging;Turbo;turbo-charging
废气涡轮增压废气涡轮增压
  1. 机车柴油机用废气涡轮增压器浮动轴承烧灼、转子积碳固死及喷嘴环热裂、叶片变形等是影响增压器可靠运用的多发故障。

    The faults that often affect the reliability of the supercharger are the cauterization of the floating ( bearing ) of the gas turbo supercharger , the carbonization of the rotor and getting stuck , heat cracking of the ( nozzle ) ring and the deformation of the blade .

  2. VTR废气涡轮增压器涡壳漏水的原因及其对策分析

    Causes of Shell Leakage in VTR Exhaust-driven Turbocharger and Countermeasures

  3. 可变几何废气涡轮增压器(VGT)的控制系统研究

    Study on Control System for Variable Geometry Turbocharger

  4. VNT通过调节废气涡轮增压器涡前压气后的压差,可将EGR率提高2%~12%。

    The EGR rate could be increased by 2 % ~ 12 % through regulating the difference between the gas pressure before the VNT and the air pressure after the VNT by means of VNT adjustment .

  5. 利用振动信号诊断废气涡轮增压器喘振故障

    Using the signal of vibration to diagnose the surge of exhaust supercharger

  6. 废气涡轮增压与发动机匹配的理论计算研究

    Study on Theoretical Calculation of Matching of Turbocharger and Engine

  7. 废气涡轮增压柴油机两典型故障分析

    The analysis of two typical trouble of exhaust gas turbocharge marine diesel engine

  8. 废气涡轮增压器涡轮盘的弹塑性有限元分析

    Elastic-Plastic Finite Element Analysis of the Disk of Turbocharger

  9. 废气涡轮增压器的喘振叶轮机叶片气动优化理论的进展

    Surging of exhaust turbochargers · progress in aerodynamic optimization theory of turbomachine blading

  10. 柴油/甲醇的组合燃烧对废气涡轮增压柴油机排放的影响研究

    Effects of Diesel / Methanol Compound Combustion on Emissions of Turbocharged Diesel Engine

  11. 与废气涡轮增压器相关的4种柴油机故障分析

    Analysis on 4 Kinds of Diesel Engine Failures Related to Exhaust Gas Turbocharger

  12. 废气涡轮增压器早期损坏的原因分析

    Cause analysis of exhausted gas turbine supercharger earlier damage

  13. 车用汽油机废气涡轮增压存在障碍及对策

    Impediment and Countermeasure on the Exhast-Gas Turbocharge for Engines

  14. 船用柴油机废气涡轮增压器壳体腐蚀的探讨

    A Study of the Casing Corrosion of Exhaust-gas Turbochargers for Marine Diesel Engines

  15. 20GJ废气涡轮增压器工作原理及故障分析

    Trouble Shooting in Operation of 20 GJ Turbochargers

  16. 本文主要研究发动机的废气涡轮增压及增压系统。

    This paper studies on the exhaust-gas turbocharger of engine and the turbocharger system .

  17. 废气涡轮增压器润滑油重力柜

    Exhaust gas turbo-charger lubricating oil gravity tank

  18. 常规潜艇废气涡轮增压柴油机排气冷却消声器的功用分析

    Analysis of Functions of Exhaust Cooled Muffler for Exhaust-Gas Turbo-Charging Diesel Engine Used in Conventional Submarine

  19. 废气涡轮增压器的喘振

    Surging of Exhaust Turbocharger s ·

  20. 小型废气涡轮增压器的压气机大都是导风轮和轮盘铸成一体的整体叶轮。

    The inducer and wheel of compressor impeller in medium and smallturbochargers are often casted together .

  21. 根据废气涡轮增压器的平衡条件,建立废气涡轮增压器的数学模型。

    And the mathematical model of turbocharging is set up by the equilibrium condition of the turbocharger .

  22. 采用废气涡轮增压和内冷直喷柴油机作为综合动力传动系中的原动机的结构已经实现。

    The structure has been implemented for a turbocharged and intercooled direct injection diesel engine used as the prime mover in an integrated powertrain .

  23. 本文针对废气涡轮增压系统及其排气能量利用的特点,讨论了排气有用能的评价参数以及其所必须满足的若干条件。

    Evaluating parameter for exhaust available energy in diesel engines and conditions that the parameter must be met were discussed in accordance with specific features of engine turbocharging systems and their exhaust energy utilization .

  24. 为复杂结构基于敏度信息的快速优化设计提供了可操作的实用方案。(5)对内燃动车组废气涡轮增压器压气机叶片进行了多学科优化研究。

    This chapter provides a good example of fast and optimized design of complex structure using sensitivity information . ( 5 ) Multidisciplinary optimization study of the blades of the locomotive diesel engine turbocharger compressor .

  25. 本文通过对多脉冲引射排气系统和定压增压排气系统的模拟计算,研究了高背压和高真空环境条件下废气涡轮增压柴油机的排气系统的适应性。

    In this paper , the adaptability of exhaust systems for turbocharged engine with multi-pulse exhaust system or constant pressure exhaust system , under high exhaust back pressure and high inlet vaccum conditions is investigated .

  26. 本文还介绍了柴油机电子控制技术在废气涡轮增压器可变喷嘴环、可变进气涡流、可变进排气门及废气再循环等领域里的发展。

    In addition , the development of the diesel engine electronic control technology in the exhaust turbocharger with variable nozzle ring , variable intake swirl , variable intake and exhaust doors and exhaust recycling fields were discussed in detail .

  27. 文章简要论述了车用燃料电池空气供给系统的净化原理和装置结构,并认为采用废气涡轮增压装置有助于解决空气传输阻力增加的问题。

    The theory and construction on air scrubbing system for fuel cell vehicle are summarized in this paper as well as the conception that turbocharger for exhaust air could be helpful to resolve the problem of increased transport resistance .

  28. 4240ZJ型柴油机是我厂最新设计的直列4缸、4冲程、废气涡轮增压的中速柴油机,为240/275型柴油机的系列产品。

    ZJ diesel engines are in line , 4 cylinder , 4 stroke and gas turbocharged medium speed diesel engines newly designed in Dalian Locomotive and Rolling Stock Works , a type of 240 / 275 diesel engine family .

  29. 结合生产实践,对柴油机废气涡轮增压器损坏原因进行分析总结,从而制定有效的预防措施及纠正方法,有利于更好地使用和维护设备。

    Through the production practice , damaged reasons to the exhaust turbocharger of the diesel engine are analyzed , the effective precautionary measures and the correction methods are formulated , thus it will be advantageous to use and service the equipments .

  30. 车辆动力系统不断向高紧凑、高性能、高可靠性的方向发展,废气涡轮增压仍是提高柴油机功率、减轻单位功率重量、减小外形尺寸、降低燃油消耗的最有效的措施之一。

    With the development of vehicle propulsion systems , turbocharging is still one of the most effective measures to increase power , reduce the unit power quality , reduce size , lower fuel consumption and strengthen the existing non-supercharged diesel engine .