取向膜

Au（111）取向膜的制备与结构表征

Preparation and Structure Characterization of Au ( 111 ) Oriented Film

同时发现衬底晶格是否匹配与C（60）取向膜的生长关系不大，而具有弱表面键的衬底有利于C（60）膜的取向生长。

Moreover , the substrate with weak surface dangling bands was found to be necessary for the oriented growth of C60 films .

芳砜纶纤维上片状Mg（OH）2晶体取向膜的制备静电纺丝&从无规纳米纤维膜到取向连续长纱

Assembly of Lamellar Magnesium Hydroxide Nano Crystal onto Modified Polysulfonamide Fabric Electrospinning : From Randomly Oriented Nanofiber Mats to Aligned Continuous Yarns

光控PI取向膜方位锚定能的温度特性

Study on the Temperature Dependence of the Azimuthal Anchoring Energy on the Photo - alignment PI Films

主要讨论摩擦技术、非摩擦技术和PI取向膜的性能。对这些技术的发展状况、特点与局限性以及今后的发展趋势进行了较为详尽的论述。

The treatise that proceeded with the development trend between localization and aftertime to these technical developments condition , characteristics details ?

LPP聚酰亚胺取向膜的制备及其取向研究

Synthesis and Characteristics of Polyimide as LPP Alignment Layer in LCDs

应用偏光显微镜、扫描电子显微镜、DSC以及测定氧氮渗透性，对乙基纤维素液晶溶液和低分子液晶共混膜在电场下取向膜和非取向膜的结构和性能进行研究，结果表明；

He structure and properties of ethyl cellulose liquid crystal , and low molecular liquid crystal composite membranes were studied and the gas permeability was measured .

测得BPDE和BADE为水平取向膜，在90℃加热30分钟仍保持完好的排列特性，已达到一般液晶器件制作过程中热处理工艺的要求；

The photo-crosslinking films of BPDE and BADE can induce homogeneous alignment of liquid crystals . Uniform alignment was kept even curing at 90 ℃ for 30 minutes and the thermal stability was suit to the general fabrication of liquid crystal devices .

光栅常数对向列相液晶响应特性的影响一种新型液晶垂直取向膜

Influence of grating constant on response characteristics in nematic liquid crystals

含联苯基团侧链聚酰亚胺液晶取向膜的研究

Study on the polyimide alignment films with side chain containing biphenyl unit

摩擦取向膜表面液晶薄层厚度的研究

Thickness Evaluation of Surface Rubbed Liquid Crystal Film Grown on Silicon Substrate

液晶垂直取向膜材料的研究

Research of Liquid Crystals Vertical Alignment Layer Film Materials

摩擦强度对取向膜表面液晶取向度的影响

Rubbing Effect on Orientational Order of Liquid Crystals on the Alignment Layer Surface

微接触印刷法制备新型液晶垂直取向膜

Fabrication of novel vertically aligned films of nematic liquid crystals by microcontact printing

提出光敏单体紫外光聚合制备液晶垂直取向膜的方法，并在实验中证实了方法的可行性。

A new method to fabricate vertically aligned films for liquid crystals was proposed and studied experimentally .

取向膜表面方位锚定强度对铁电液晶分子排列的影响

Effect of Surface Azimuthal Anchoring Strength Energy of Alignment Layer on the Molecular Alignment of Ferroelectric Liquid Crystals

取向膜作为液晶显示器的重要组成部分，起到使液晶分子在液晶盒内整齐排列的作用。

As an important component of LCD , alignment layer makes liquid crystal molecule arranged orderly in the LCD cell .

射频等离子体化学气相沉积择优取向膜的研究直流辉光化学气相沉积金刚石的成核密度研究

The Preferred Orientation Films Deposited by RF-PCVD Study on Density of Diamond Nucleation with DC Glow Discharge Chemical Vapor Deposition System

聚酰亚胺取向膜是液晶显示器的重要组成部分，对显示器件性能具有重要影响。

Polyimide alignment layer is one of the key materials of manufacturing LCD , having an important effect on the character of LCD .

影响取向膜性能的因素主要有取向膜材料聚酰亚胺本身的特性、取向膜形成的工艺和取向膜的取向摩擦过程。

Properties of polyimide as alignment Layer material , manufacturing process and rubbing process of alignment layer are main influencing factors of alignment layer properties .

论文从向列相液晶在基板表面处的排列状态入手，分析了摩擦取向膜对液晶分子排列的影响。

Based on the arrangement state of NLC on the baseplate surface , we analyzed the effects of rubbing alignment on the LC molecular arrangements .

给出了该平整度仪在液晶显示器中液晶分子取向膜边缘表面轮廓形状研究方面的一些测试结果。

Some of the testing results in the study of surface edge shapes of orientation films in Liquid Crystal Devices ( LCD ) by the tester are presented .

摩擦取向膜表面的作用是减小固体界面对液晶排列的干扰，控制液晶的自由轴方向和体排列状态。

The action of rubbing is just for reducing the alignment interference from the solid surface , and therefore controlling the orientation and the alignment pattern of the bulk .

文章重点分析了聚酰亚胺结构及组成、取向膜涂布方法及固化温度、取向膜摩擦材质及摩擦强度等对取向膜性能的影响。

Influence of polyimide structure and component , coating method and curing temperature of alignment layer , rubbing material and rubbing strength on alignment layer has been analyzed in the article .

论文深刻分析了之字形排列缺陷的产生机理，实验中通过改变取向膜的锚定强度控制了液晶分子的预倾角，获得了均匀的人字形层结构排列态。

We profoundly analyzed the forming mechanism of the zigzag defect . And by controlling the anchoring strength and the pretilt angle of the alignment films , we obtained the uniform chevron shaped layer alignment of the FLC .

根据以上分析，实验中采取缓慢降温的方法，使取向膜表面处的液晶分子通过热脱附运动逐渐与体内部的层结构一致，消除界面层应力，从而获得了均匀一致的排列。

As we slowly decrease the temperature , the stress in interfacial layers is eliminated because the layer structures on the surface is progressively identical to those in the bulk due to heat-induced de-adhering movement of FLC molecules . As a result , we obtain a uniform alignment .

c轴取向MOCVD-YBCO膜临界电流密度的角度效应

Angular dependence of the critical current density of the c-axis oriented mocvd-ybco film

讨论了X型或Z型膜中分子间距、层间距、分子取向、膜层数等结构参数对分子聚集行为的影响。

For Z_type films , the dependence of molecular aggregation state on the structure parameters , i.e. separation distance a , separation between two adjacent layers d , molecular orientation θ, and layer number g , were studied by applying our model .

有取向紫膜薄层光电位及其与光强度的关系

The photovoltage in the dried oriented purple membrane film and its dependence on light intensity

通过溶血率测试，动态凝血试验及血小板粘附试验探究了取向复合膜的血液相容性。

Blood compatibility of those composite membranes were identified by measurement of the haemolysis ratio , the dynamic blood clotting test and the platelet adhesion test .