元分析
- 网络FEA;Meta-analysis;Meta analysis
-
基于元分析的国际知识管理研究特征分析
Analysis of the Characteristics of International Research of Knowledge Management Using Meta-analysis
-
单一被试实验与元分析技术
The Single Subject Research and Meta-Analysis
-
把动坐标迭代法应用于下部钻具组合(BHA)的非线性有限元分析。
Moving-coordinate reiterative method is used for non-linear finite analysis of BHA .
-
并使用有限元分析软件对不同微桥进行结构分析,以比较其稳固性
Its distributing of stress is simulated by finite element analysis software order to compare their fixedness .
-
任意形状的H面矩形波导不连续性的有限元分析
Finite-element analysis of H-plane discontinuities of arbitrary shape in a rectangular waveguide
-
H面波导不连续性的边界元分析
Analysis of H-plane Waveguide Discontinuities Using Boundary Element Method
-
异形内R型螺栓头部支承面压力有限元分析
FEM Analysis of Bearing Pressure at Bolted Joint for the Heterogeneous Bolt with the Internal Radius
-
用ANSYS软件对U形波纹管的有限元分析
The Finite Element Analysis to the U-shape Bellows by the ANSYS Program
-
输电铁塔ANSYS建模及有限元分析
Transmission tower ANSYS modeling and finite element analysis
-
碳纤维筋(CFRP)夹片式锚具的有限元分析
Finite Element Analysis of CFRP Tendons under Action of Wedge - type Anchorage
-
用有限元分析软件ANSYS对四分压电陶瓷管进行模态分析,得出该陶瓷管的前12阶谐振频率和模态振型。
Using the ANSYS software of finite element , modal analysis is executed and twelve steps harmonic frequency are obtained .
-
采用ANSYS软件对某高桩码头拟改建后的基桩桩力进行了有限元分析。
Software ANSYS was utilized to conduct FE analysis of the foundation-pile bearing capacity of the wharf to be renovated .
-
挠性抗回旋PDC钻头的有限元分析
Finite Element Analysis of Flexible Anti - Whirl PDC Bit
-
其主要工作和成果如下:(1)利用有限元分析法研究了W型和纤芯凹陷型剖面结构非零色散位移光纤的设计原理和传输特性。
The design principle and transmission properties of non-zero dispersion-shifted fiber with core-depressed and W type of profile are studied by finite-element method .
-
锅炉三维造型系统是锅炉CAD应用系统的子系统,三维实体建模是进行有限元分析和空间管路干涉检查的基础。
The solid modeling system is subsidiary to " Boiler CAD Application System " . 3D Solid modeling is basis of FEM analysis and pipe line interference check .
-
OpenGL图形库具有良好的3D图形生成功能,而科学计算可视化对于有限元分析软件是必不可少的部分。
OpenGL graphic database has an ideal function of generating 3D graphics , and scientific computation visualization is absolutely necessary for finite element analysis software .
-
同时给出了一个用大型有限元分析软件Marc来进行接触分析的实例。
At the same time , an example of finite element contact analysis is analyzed by Marc .
-
方法:利用螺旋CT扫描的方法,采用图像处理和有限元分析软件建立567及其支持组织的三维有限元模型。
Method : Established a 3-D finite element model of | 567 and their supporting tissues by means of SCT scanning technology and software of image processing and finite element analyzing program .
-
SOMA驱动桥桥壳有限元分析及强度校核方法
Finite element analysis and strength verification of SOMA drive axle casing on construction machine
-
基于ADINA的真空干燥机箱体结构有限元分析及改进
Finite Element Analysis and Improvement for Box Structure of Vacuum Dryer Based on ADINA
-
RPA卡环支持组织的三维有限元分析
The 3-Dimensional Finite Element Stress Analysis of the Supporting Tissues in the RPA Clasp
-
建立了相应的有限元分析模型,运用ANSYS非线性有限元分析法,对钢管内部设置加强环的节点进行了静载下的弹塑性分析。
Set up corresponding finite element and analysis models , use ANSYS non-linear finite element analytic approach , have set up the joints which ring-strengthened and carried on the static elastoplastic analysis .
-
方法:图像特征点提取用数字图像处理技术得到,利用Matlab进行单元自动划分,得到有限元分析数据。
METHODS : The contour points were obtained by using digital image process . The Matlab software was used to differentiate automatically the elements and nodes so as to get data for finite element analysis .
-
Mooney-Rivlin材料Ⅰ型裂尖场的有限元分析
Finite Element Analysis of Crack Tip Field in Mooney-Rivlin Material
-
进一步利用有限元分析软件MSC/NASTRAN建立了三个水泥输送泵车结构有限元优化模型。
Three structural FE model are established with the FEM based on MSC / NASTRAN . In the first optimization model , the exhaustive parameters are selected firstly .
-
通过solidworks软件能够建立精确的圆柱凸轮的三维模型,为有限元分析和动态仿真奠定了基础:(4)能够将设计结果转换为数控加工代码,为数控加工做好准备。
The system can set accurately up the three-dimension model by Solid Works , on which the finite analyses and the dynamic emulation are based ; ( 4 ) the system turns the result of design into NC code , which is prepared for the NC manufacturing .
-
采用动、静态相结合的采样方法考察了传感器阵列的检测能力,在动态实验中通过提取不同的特征值并利用主元分析(PCA)和聚类分析(CA)方法对数据进行了分析和识别。
Using static and dynamic sampling methods to exam the detection ability of the sensor arrays . Principal Component Analysis ( PCA ) and Cluster Analysis ( CA ) were used in the data analysis and pattern recognition .
-
建立了水梁的平面和三维实体模型,并利用ANSYS给出的有限元分析结果,确定了水梁产生裂纹的根本原因,即水梁的高度偏差和在高温交变载荷作用下的受力变形。
The planar and 3-D FEM models of the water beam have been set up . The water beam height deviation and deformation under alternating load at high temperature are the basic causes according to the ANSYS finite element model .
-
以新安江两等跨箱形混凝土拱桥为工程背景,采用大型有限元分析软件ANSYS建立三维有限元模型并对其进行动力特性分析,并用实桥脉动测试结果进行校核;
ANSYS was used to establish a finite element model of the box-shaped concrete arch bridge with two equal spans , and an analysis of dynamic property was preformed , and measured impulse data was used to verify the analysis result .
-
对背部开有不同深度、不同直径沉孔缺陷的平板表面采用恒定热流加热。使用有限元分析软件Ansys计算得到表面温度分布云图和温升。
Finite element analysis software Ansys , was used to calculate the temperature field of the plates with back sinking hole defects of different depth and diameter under constant heating condition , and surface temperature cloudy map and temperature rise were obtained .