齿轴

齿轴是起重配件的一种。

Gear shaft is a kind of lifting accessories .

本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构，论述了模具结构特点和工作过程。

The thesis presents a practical die structure with angle pin and gear shaft and rack for secondary combined inclined down loosing core of die casting hopper bodies .

齿轮机座齿轴的失效分析

Failure Analysis of the Gear Axis for Gear Machine Seat

工作部件由滚齿轴组成。

Working part was composed of hobbing axle .

小模数渐开线花键齿轴的滚压技术

The Rolling Technique for Fine-Module Involute Spline Shaft

斜销-齿轴-齿条二级联合斜下抽芯压铸模设计

Design of Diecasting Die with Angle Pin and Gear Shaft and Rack for Secondary Combined Inclined Down Loosing Core

传动变速机构采用了减速器、链轮传动，电动机的动力传递给滚齿轴，实现松土机耕作土壤的目的。

Varying speed institution used speed reducer and rag wheel to drive separately . The power of electric motor was transferred to achieve the aim of loosening soil .

整机主要由电动机、减速器、滚齿轴和操纵机构等组成。电动机提供动力，通过联轴器与减速器连接。

The whole machine composed of electric motor , speed reducer , hobbing axle and operation system etc. Electric motor supplied power and it was connected with speed reducer through shaft coupling .

分析了圆滚模滚压加工小模数渐开线花键齿轴的成形原理，提出了圆滚模参数设计中的修正量计算，简要介绍了圆滚模的制造方法。

This paper analyses the forming principle of small module involute toothed Spline shaft , rolled with circular rolling die , Presents calculation of correction in designing parameters the circular rolling die .

短纹杆-板齿式轴流脱粒分离装置性能试验

Performance Test of Short-rasp-bar of Axial Flow Threshing and Separating Unit

四齿短轴的冷挤压工艺及模具设计

Cold Extrusion Technology and Die Design of the Four Teeth Short Axis

超长端面齿接轴的加工工艺

The Machining Process of the Ultralong Face Tooth Spindle

鼓形齿接轴的研制及应用

Drum Gear Couplings ' Research and Application

螺旋叶片带板齿式轴流脱粒与分离装置试验台功耗的试验研究

Study on Power Consumption about the Axial Flow Threshing and Separating Installation with Helical Blade Plate

毛革两用革的涂饰技术超长端面齿接轴的加工工艺

Finishing Technology of Double - face Leather The Machining Process of the Ultralong Face Tooth Spindle

鼓形齿接轴重量大，附加值高，国产化生产十分必要。

Since the drum gear coupling is heavy and has higher added values , it is necessary to localize the manufacture .

对工程中分析弧形齿联接轴及其相应轴段所受弯矩的影响具有重要参考价值。

It is very useful to analysis the affection of crown gear coupling and correspond axis by addition moment of bending in engineering .

针对轴流脱粒机在实际生产中的广泛应用和人们对于脱粒机理的研究还不深入的现状，结合国内外同类技术研究经验，研制了螺旋叶片带板齿式轴流脱粒与分离装置试验台。

As the axial flow threshing and separating equipment were used more and more widespread and the theory of threshing was not researched deeply , the axial flow threshing and separating installation with helical blade plate were triturated according to the same kind of technique experience .

数控磨齿机Z轴电液伺服系统的位置控制

Position Control of Electro hydraulic Servo System for CNC Gear Grinder

成功地模拟了2D、3D齿轮轴成形过程，真实直观地揭示了轧件的变形机理和齿部与轴部同时成形的效果，表明本文所建立的有限元模型及模拟结果正确和有效。

The forming process of the gear-shaft is simulated with 2D and 3D methods , the deforming mechanism of the rolled parts and the effect of simultaneous forming the teeth and the shaft are demonstrated visually .

Y（5132C）插齿机刀轴的裂纹分析与控制

Analysis and control of fissure in cutter shaft on y_ ( 5132c ) gear shaper

在鼓形齿联轴器无轴间倾角的情况下，应用自行开发的弹性接触有限元分析程序及I-DEAS软件对啮合轮齿进行有限元接触分析；

When the inclination of axes does not exist , the FE contact analysis of the meshing gears is carried out by the means both of the FE elastic contact analysis program developed by our own lab and of the I-DEAS software .

零传动滚齿机蜗轮轴优化设计

Optimum design on worm-wheel shaft of gear hobbing machine with zero-drive chain

所述外齿轴套与轴之间为花键连接。

The outer gear shaft sleeves are in splined connection with shafts .

转向齿扇摇臂轴断裂分析

Fracture Analysis on Veering Fan - shaped Rocker Shaft

汽车变速器渐开线齿形花键轴的冷挤压成形技术

The Cold Extrusion Shaping Technology of Automotive Transmission Involute

结合六齿矩形花键轴实际成形情况进行模拟计算，获得了入模半锥角的较佳取值范围。

By numerical simulation of a six-tooth rectangle spline , the optimized half-angle of the concave die can be got .

通过金相检验，扫描电镜等测试手段对转向齿扇摇臂轴断裂原因进行分析。

In this paper , the fracture of the veering fan-shaped rocker shaft was analyzed by means of metallograph and SEM .

对于传递扭矩的渐开线齿形花键轴，采用冷挤压成形加工方法对其齿形部分进行近净成形加工是高效而经济的。

The cold extruding process is one of the most economical and high efficiency technology for the gear shaft with involute-gear-tooth for transferring torque in automobile .

介绍了济钢一烧采用堆焊技术修复单辊破碎机辊齿和辊轴的经验及取得的效果

The experience about repairing the crusher teeth and shaft by the built-up welding technique and the effect obtained in JIGANG № 1 sintering plant were presented