齿刀
- 网络serrated knife
-
小模数(mn≤1.75)剃齿刀轮齿刚度的研究
Study on Gear Tooth Rigid of Fine Pitch Shaving Cutters
-
基于Windows平台的插齿刀CAD/CAPP系统
CAD / CAPP System for Gear-slotting Cutters Based on Windows OS
-
新构形法硬齿面插齿刀及其CAD
New configured hardened face gear pinion cutter and its CAD
-
变位插齿刀的数学模型及其CAD研究
The Mathematical Model of Deflection Slotting Cutter and It 's CAD Research
-
插齿刀CAD系统的设计与加工过程仿真
Design and Process Simulation of Gear Shaper Cutter CAD System
-
剃齿刀修形技术及其CAD系统的研究
The Profile Modification Technique of Shaving Cutter and the Study of CAD System
-
插齿刀CAD图形输出系统
Drawing Output System of CAD of Gear Shaper Cutter
-
插齿刀CAD系统的开发与应用
Development and Application of CAD System for Pinion Cutter
-
渐开线型插齿刀CAD/CAM几何模型的新探讨
A study on cad / cam geometric model of involute gear shaping cutter
-
PC总线工业控制计算机的剃齿刀磨齿机数控系统
CNC System of Industrial Personal Computer with PC BUS for Shaving Cutter Grinding Machine
-
基于Windows操作系统的插齿刀设计
The Design of CAD System for Radical Changeable Matrix Slotting Teeth Cutter Based on Windows Operating System
-
本文着重介绍了插齿刀CAD图形输出系统研制的基本原理。
This paper presents the principle of designing a drawing output system of CAD of gear shaper cutter .
-
专用插齿刀最大变位系数(X0)(max)的选择
Approximation of Maximum Modification Coefficient ( X_0 ) max for Special Tooth - Slotting Tool
-
基于VB6.0的盘形剃齿刀CAD系统
Automatic Design System for the Circular Gear Shaving Cutters Based on VB6.0
-
介绍了为适应集成化要求而开发的插齿刀CAD/CAPP集成系统的结构及功能。
The structures and functions of the CAD / CAPP integrated system for gear shaper cutters are introduced .
-
介绍了基于VB环境的插齿刀CAD系统的构成与主要模块功能。
The make up and modular functions of a CAD system for gear shaper cutters based on VB condition are introduced .
-
试验结果表明,用该方法加工的锥基波形前刀面硬齿面插齿刀接近AA级标准。
Their results show that the cutter 's machining accruacy approaches to the criterion of AA level .
-
研究了变位插齿刀CAD系统的总体结构框架,并对有关的功能模块进行了详细设计。
At this foundation , the gross structure frame of modification coefficient slotting cutter CAD system and detailed analyses and Design concerned functional module was studied .
-
电镀CBN珩齿刀工艺的分析与改进
Analysis and Improvement on the Process of Electroplating CBN Gear-honing-tool
-
钎焊镀膜CBN外珩齿刀的工艺研究
Study on the Process of Brazing Nickel-plate CBN Gear-honing-tool
-
电镀CBN珩齿刀的工艺研究
Study on the process of electroplating CBN gear-honing-tool
-
为了虚拟检验径向剃齿刀CAD系统的正确性,有必要对刀具齿面进行建模。
In order to virtually test the accuracy of profile data obtained through the plunge shaving cutter CAD system , it is necessary to model the flank of the plunge shaving cutter .
-
给出用锥形砂轮磨制矩花键轴螺旋插齿刀的CAD/CAM数学模型,并结合具体算例验证了方法及模型的可靠性。
The author give CAD / CAM mathematical model of rectangular spline gear spiral shaping cutter with cone-type grinding wheel , and verify the stability of this model with practical example .
-
本文阐明了用线性化法逼近专用插齿刀最大变位系数(X0)(max)的方法。
In this paper , the author discusses a method for approximating the maximum modification coefficent ( x_0 ) _ ( max ) for special tooth-slotting tool with linearized method .
-
给出了采用PC总线的工业控制计算机作为剃齿刀磨齿机的数控系统,细分步进电机系统及光电编码器作为执行及检测元件的系统构成方法。
This paper presents a practical method of the CNC system of industrial personal computer with PC BUS for shaving cutter grinding machine , with the micro_stepping_motor system as performing unit and the optoelectronic coder as measuring unit .
-
本论文以其中一种常见的齿轮刀具&带变位系数的插齿刀为例,对其数学模型及其CAD系统进行了一些探索和研究。
In this paper , as a sort of common wheel cutter with modification coefficient for example , a cutter CAD system of gross structure frame and mathematical model had been established ; then trace and research the functional module .
-
外插齿刀的多目标优化设计Cookie-Cutter集合的多重结构
Multi - purpose Optimum Design of Pinion Cutter Multi - layer Construction of Cookie - Cutter Sets
-
分析现有电镀CBN珩齿刀的制作工艺,重点论述其基体与镀层的结合力及置砂问题,提出改进措施。
Introduces the present technical process of electroplating CBN gear-honing-tool , especially discussing the binding force between nickel layer and matrix and the problem of planting abrasives , some improved solutions are given .
-
本文对插齿刀变位系数的选择进行了研究,并在以下两个方面作了具体工作:1、建立了插齿刀变位系数选择的数学模型,研究了插齿刀CAD的算法;
This paper makes a study on the selection of position-shift coefficient of GSC , and achieves in the following two aspects : 1 put forward a mathematical model for selection of position-shift coefficient for position-shift gear , and makes an investigation on the CAD algorithms for GSC CAD system .
-
该系统借助VB的强大功能和AutoCAD与高级语言的接口,获得AutoCAD的图形交换文件DXF,可自动生成剃齿刀零件图纸和工艺卡片等设计文件。
With the help of the powerful function of VB and the interface between AutoCAD and advanced languages , the DXF documents in AutoCAD can be obtained and the design documents for the part drawings and technological cards of gear shaving cutters can be create automatically .