高速研磨

双面高速研磨机研制

Development of Double-sides High Speed Lapping Machine

与传统的散粒磨料慢速研磨相比，固着磨料高速研磨显著提高了研磨加工效率。

High speed lapping with Solid abrasive is able to significantly improve grinding efficiency , compared with conventional granular abrasive slow grinding .

双面高速研磨数字控制过程研究

The Study of NC Process of Double-Side High-Speed Lapping Machine

实验室中制备了一个完整的固结磨料抛光垫样品，配置相应的抛光液，在高速研磨抛光机上进行了抛光试验探索。

The fixed abrasive polishing pad and the relevant slurry were prepared .

球面磨具保形磨损高速研磨

High Speed Spherical Surface Lapping Tool Wearing Without Surface Shape Accuracy Decreasing

基于弯曲成形法抛物面高速研磨的研究

Research on high speed lapping paraboloid workpiece based on bending and forming method

平面数控高速研磨机加工工艺参数专家系统研制

Development of Process Parameters Expert System for Numerical Control High Speed Plane Lapping Machine

超声高速研磨陶瓷表面残余应力特性研究

Experimental research on the surface residual stress in ultrasonic lapped surface of engineering ceramics

论文探讨了采用固着磨料高速研磨进行纳米级加工的有关问题。

A high speed solid abrasives lapping technology was used for machining photoelectric elements .

固着磨料高速研磨工件表面硬化规律的研究

Study on the Face Hardening Discipline on High-speed Grinding Parts based on Fixed Abrasive

平面光电器件的纳米级高速研磨

High Speed Nanometer Lapping Photoelectric Elements

结论乳糖和格列齐特一定比例下经高速研磨混合的样品形成了共熔体；

Conclusion The sample of Galactosylglucose and Gliclazide can form solid dispersion by high speed grinding .

本文探讨了弯曲成形法高速研磨抛物面的原理和磨具弯曲成形理论。

This paper discusses the forming method high-speed grinding paraboloid of the principle and abrasive bending theory .

利用弯曲成形法制作磨具是进行抛物面零件高速研磨加工的新方法。

High speed lapping of the paraboloid work-piece with the lapping tool by bending is a new method .

介绍了一种工程陶瓷超精密镜面加工的新方法，即高速研磨和抛光新技术。

Introduces a new method of mirror machining of engineering ceramics , viz . , hteh speed lapping and polishing .

实验选用合适的颜料、填料作为有机硅树脂的添加剂，通过高速研磨，并添加一定量的稀释剂，制备了一种耐高温隔热涂料。

The high temperature insulation coating was made by choosing the appropriate pigments , fillers and diluent , and grinding them at high speed .

本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。

Through experiments of high speed lapping with solid abrasives , the effect of lapping pressure on machined surface roughness is studied in this paper .

固着磨料球面高速研磨是在球面高速研磨机上采用成形法加工球面工件。

During the processing of spherical workpieces on high speed spherical surface solid abrasives lapping machine , we must ensure the surface precision of the workpieces .

在应用固着磨料高速研磨技术时如何保障磨具的轮廓几何精度，一直是一个难点与重点。

How to ensure the geometric accuracy of lapping tools ' profiles is always difficulty and key , when we use high speed lapping with solid abrasives technology .

对固着磨料高速研磨工件已加工表面理论粗糙度进行了探讨，并对工件已加工表面粗糙度、微观形貌与研磨加工中各工艺参数之间的关系进行了研究。

This paper made a study of theoretical roughness of surface on machined surface by high-speed lapping with solid abrasive , and of the relationship between machined surface roughness , micro-topography and parameters of lapping .

本文讨论了采用固着磨料高速研磨类似不锈钢这样的韧性材料时，工件表面容易产生较深划痕这一现象。

This paper discusses the fact that the deep scratch appears more easily on the workpiece surface when toughness material , such as stainless stainless steel , is lapped with solid abrasive at high speed .

尤其是固着磨料高速研磨，不仅提高了加工精度，而且极大地提高了加工效率，降低了加工成本。

, and all these lapping processes improve precision and quality of lapping to a certain degree , especially high-speed lapping with solid abrasive improved machining precision , increased machining efficiency sharply , further more reduced machining cost .

介绍了高速涂布对研磨碳酸钙（GCC）的要求、超细碳酸钙的研磨工艺流程，论述了在碳酸钙研磨中分散剂的选择。

This paper introduced the requirement of high-speed coating on the GCC , described the grinding technological process of ultrafine GCC and discussed the dispersant selection of GCC .

用高速钢盘研磨加工聚晶金刚石

Polishing of Polycrystalline Diamond with High-speed Steel Plate Acme Disk