高能球磨法

  • 网络high-energy ball milling;High energy ball milling
高能球磨法高能球磨法
  1. 重点介绍并分析了高能球磨法、气体蒸发法、等离子体法、自蔓延高温还原法、氧化钨粉还原法等制备方法优缺点。

    The advantages and drawbacks of the important preparation methods such as high-energy ball milling method , gas evaporation method , plasma method , SHS with reduction method and tungsten oxide reduction method were reviewed .

  2. 分析了用高能球磨法,以食品添加剂为助磨剂制备出的纳米级铁粉在空气和其它不同条件下的稳定性。

    The stability of nano-sized Fe powder prepared by high energy ball milling with the additives as the milling agents is discussed .

  3. 采用高能球磨法,制备出了晶粒度约11nm的掺Ce硬质合金粉末。

    Ce doped hard metal powder of 11 nm grain size was prepared by high energy ball milling method .

  4. 在合成TiO2的三大类工艺(气相法、液相法与高能球磨法)中,液相合成方法是最简单易行的工艺。

    The liquid phase method , nevertheless , is the simplest and most easily gained methodologies .

  5. 采用定性和定量手段系统比较了高能球磨法与常规混合法对SiCp(B4Cp)/Al复合材料增强体颗粒分布均匀性的影响。

    The effects of high energy ball milling and general mixing on the spatial distribution of reinforcers of the SiC p ( B 4C p ) / Al composites have been investigated systematically by means of qualitative and quantitative methods .

  6. 采用高能球磨法合成磷化钴系列化合物。

    Cobalt phosphides were synthesized by high-energy ball-milling technique .

  7. 采用高能球磨法及热压成型工艺制备了铜基温敏复合材料。

    The Cu-based function nanocomposite material is made by high energy ball mill and thermo-compression craft .

  8. 采用高能球磨法以金属铝还原锡的氧化物,通过添加金属钴粉,合成了高分散锡和锡钴合金材料。

    Highly dispersed tin and tin-cobalt alloys were synthesized via reduction of tin oxides by aluminum under high-energy ball-milling .

  9. 高能球磨法是合成多体系复合材料的重要方法之一,产物具有特殊的化学和物理特性,为发展和改良复合材料性能提供了一种新的途径。

    High energy ball milling has been one of the important methods for the preparation of multi-system composites , which exhibit particular chemical and physical properties .

  10. 高能球磨法使增强体颗粒弥散均匀分布于基体中,是实现增强体颗粒均匀分布的最有效的方法之一。

    High energy ball milling , which leads to the dispersed homogeneous distribution of reinforcements in the matrix , is the most effective method for obtaining homogeneous distribution of reinforcements .

  11. 目前所报道的固溶体的主要制备方法有共沉淀法、溶胶-凝胶法、氧化物高能球磨法、表面活性剂模板法、溶液燃烧法、化学削锉法以及络合法等。

    These include conventional co-precipitation , sol-gel techniques , the high-energy milling of a mixture of the oxides , a surfactant-assisted approach , a single step solution combustion process , chemical filling and the citrate method et al .

  12. 结果表明:高能球磨法混料是显著改善增强体颗粒形貌、细化增强体颗粒粒度,在基体更小的微区域中实现增强体颗粒数量分布均匀性的最有效混料方法;

    The results indicate that high energy ball milling is the most effective powder mixing method , which can remarkably improve the shape of reinforcements , reduce their size and lead to the dispersed homogeneous distribution of reinforcements in quantity at smaller micro-areas in the matrix .

  13. 氯化一水五氨络高钴高能球磨还原法对废水中邻氯苯酚的脱氯研究

    Dechlorination of o-chlorophenol in wastewater by reduction under high energy ball milling

  14. 高能球磨还原法对废水中邻氯苯酚的脱氯研究在各提取物中氯仿提取物活性最强。

    Dechlorination of o-chlorophenol in wastewater by reduction under high energy ball milling The chloroform extract was the most active .

  15. 碱性氧化还原电位水拌和混凝土性能初探高能球磨还原法对废水中邻氯苯酚的脱氯研究

    Study on the Properties of Concrete Mixed with Alkaline Redox Potential Water Dechlorination of o-chlorophenol in wastewater by reduction under high energy ball milling