轴套

zhóu tào
  • shaft sleeve;axle sleeve;sleeve pipe;shaft installing sleeve
轴套轴套
轴套[zhóu tào]
  1. 两片叶轮装在轴套下端,确保引风量适中。

    The two impellers are arranged at the lower end of the axle sleeve to ensure moderate air-draft amount .

  2. 通过与桦木套的性能对比,证明了填充聚四氟乙烯用来生产船舶尾轴套是可行的,并且性能优良。

    Compared with birch sleeve , filled PTFE had proved to be suitable for the application to the tail axle sleeve of boat , and the filled PTFE had superior properties .

  3. 在CAPP系统中对轴套类零件的描述方法

    The description model for the bush-axle type parts in CAPP system

  4. 基于UG的卷制轴套模具CAD系统的设计与应用

    The design and application for mould CAD system of sleeves rolled based on UG

  5. CAE技术在汽车半轴套热挤压缩管成形中的应用

    Application of CAE Technology in Forming of Hot-extruding Compressed Pipe of Half-axile Bush

  6. 填充碳纤维PTFE在水轮机导叶轴套上的应用

    Use of Carbon Fiber Filled PTFE as a Material for Making Water Turbine Guide Blade Sleeves

  7. 基于DYNAFORM的自润滑轴套卷制成形的数值模拟

    Numerical Simulation on Wrapping of Self-Lubrication Bearing Bush Based on DYNAFORM

  8. ALSTOM水轮机导叶中轴套密封改造

    Improvement on the Seal in the Intermediate Guide Vane Stem Bearing of ALSTOM Hydraulic Turbine

  9. 通过ZA系列锌铝合金轴套的研制和装机试验,进一步证明其耐磨性能。

    Through development and on-board test of ZA alloy bushing , its wearing performance has been further demonstrated .

  10. NBA型泵是单级单吸悬臂式离心泵,主要由进水口、泵体、叶轮、轴和轴套等零件组成。

    Type NB , NBA pumps are single-stage single-suction cantilever centrifugal pumps , it mainly consists of inlet , pump casing , impeller , shaft and shaft sleeve etc.

  11. 600MW发电机组循泵轴套加工方法

    Machining of a Shaft Sleeve for the Circulation Pump of a 600 MW Generating Set

  12. STG泵此处采用镶配不锈钢轴套,避免锈蚀发生,提高了轴寿命,降低了运行维护成本。

    STG pump with stainless steel sleeve inserts used here to avoid the corrosion occurrence of increased life expectancy axis , reducing operation and maintenance costs .

  13. 阻拦索模型采用线性轴套的连接方式模拟了拉伸、弯曲、扭转等多自由度的弹性形变,利用CMD语言实现了参数化建模。

    The model of arresting cable simulates extension , bending , twisting and the elastic deformation in other degrees of freedom using linear bushing , and achieves parametric modeling by CMD language .

  14. 在实验的基础上,推算填充碳纤维的PTFE材料制成轴套工作6~7年不必拆卸维修;在实际应用中已取得满意的效果。

    Based on these experimental results , it is reckoned that the carbon fiber filled PTFE sleeve may show a service life of 6 to 7 years without need of dismantling and repair , and satisfactory performance in actual service has already been shown .

  15. 采用挤压法试验生产的ZA12锌铝合金轴套,制品表面光洁、无裂纹;显微组织和机械性能均优于铸件;

    The sleeve , which is produced by extruding and is made from ZA12 Zn-Al alloy , has high surface finish and no crack on its surface .

  16. 研究了新型铝基滑动轴承合金(TZS88)的成分和性能,用以取代ZCuSn6Zn6Pb3锡青铜制造整体材质的轴瓦、轴套等机械零件。

    The composition and performance of a new aluminum base sliding bearing alloy ( code : TZS88 ), which was used to substitute tin bronze ( ZCuSn6Zn6Pb3 ) to make axle bushing and sleeve , were studied .

  17. 本文所研究的HWF-5往复摩擦磨损试验机的智能测试系统,将计算机技术、自动化技术以及测试技术与摩擦磨损试验机有机地结合起来,对于减振器轴套研究的深入开展有着重要意义。

    In this thesis , computer technology , automatic testing technology and measuring technology were successfully intergrated in the developed intelligent testing system for the HWF-5 reciprocating tribometer . It is of great significance for the research of guide sleeves in the shock absorber .

  18. 电扇风叶支架轴套结构设计的改进

    An improved structure design of vane holder bush in electric fan

  19. 钛合金薄壁轴套类工件的切削加工

    Cutting of the Shaft Sleeves of Thin - wall Titanium Alloy

  20. 4.Bushing轴套A:自动润滑轴套在西方国家很流行。

    A : Self-lubricated bushing is very popular in western countries .

  21. 惯性圆锥破碎机轴套的磨耗机理解析及对策探讨

    Analysis on wear mechanism of the bearing of inertia cone crusher

  22. 自润滑复合材料在绣花机轴套中的应用

    Application of self-lubricating composite material to axle sleeves of embroidery machine

  23. 英制轴套的尺寸尚未标准化。

    The dimensions of the inch bushings have not been standardized .

  24. 汽车半轴套管用无缝钢管

    Seamless steel tube for manufacture of automobile half shaft sleeve

  25. 加轴套修复轴是常用的修复方法。

    Adding thin-wall shaft sleeve is a normal method in repairing axes .

  26. 提供一条钢条用于旋转调节轴套。

    A steel rod is provided to turn adjusting collar .

  27. 所述外齿轴套与轴之间为花键连接。

    The outer gear shaft sleeves are in splined connection with shafts .

  28. 若是多组型产品,轴套是无镀层的黄铜。

    For ganged version , the bushing is metal brass without plating .

  29. 传动轴套管叉高频淬火工艺

    High Frequency Induction Hardening for Sleeve Fork of Driving Shaft

  30. 斗杆体轴套焊缝部位早期断裂原因剖析

    Analysis of the Early Crack on Weld Seam of Bucket Arm Sleeve