解耦系统

  • 网络decoupled system
解耦系统解耦系统
  1. 给出了非线性解耦系统平衡点的计算公式。

    The calculation of equilibrium points for a nonlinear decoupled system is discussed .

  2. 利用求逆算法,逐步给出系统的逆系统、反馈控制规律、α-阶积分逆系统、伪线性系统(积分解耦系统)。

    In the case , the third order controlling law ,α - order integral inverse system and integral decoupled system for the plant are derived step by step .

  3. 用改进的神经网络优化PID参数的解耦系统

    A Decoupling System Based on Neural Network to Improve Parameter of PID

  4. 针对某燃烧系统中温度、流量耦合的特点,基于两种典型的解耦系统结构,设计了一类前置反馈补偿解耦控制和PID控制相结合的控制系统。

    Based on two classical structures of decoupling system , a control system consisting of a feedback compensation decoupling control and PID control is proposed to solve the multivariable coupling problem of the gas temperature and flux in a combustion system .

  5. 基于神经网络PID控制和解耦系统的特点,应用一种针对多输入多输出解耦系统的单神经元PID解耦算法和结构,并在算法中增加了自适应学习速率,更好的实现对耦合系统的解耦控制。

    Based on PID neural network control and the characters of decoupling systems , arithmetic and structure of single neural PID decoupling is proposed . The arithmetic can be use in multiple input and multiple output decoupling systems and can realize decoupling control for coupling systems .

  6. 线性多变量解耦系统的稳定性和灵敏度

    The Stability and Sensibility of a Linear Multivariable Decoupling System

  7. 状态反馈解耦系统的增益阵结构与极点配置

    Construct of cain matrix in state feedback decoupling system and pole placement

  8. 对解耦系统根据性能指标要求配置了闭环系统的极点;

    The poles of the closed loop system are assigned from the specification requirements for decoupled control system .

  9. 讨论了线性多变量解耦系统,在有扰动的情况下的稳定性和灵敏度,给出了稳定裕度边界。

    The stability and sensibility of a linear multivariable decoupling sys-em with interference are discussed and the margin of stability is provided .

  10. 本文针对化工过程控制系统,讨论了一类实用的解耦系统结构和设计方法。

    In this paper , the problems of structure and design methods of decoupling control system in chemical industrial process are discussed .

  11. 项目管理的新方法:从设计结构矩阵到领域配置矩阵状态反馈解耦系统的增益阵结构与极点配置

    A New Approach of Modern Project Management : From Design Structure Matrix to Domain Mapping Matrix ; Construct of cain matrix in state feedback decoupling system and pole placement

  12. 本文研究了感应电机孵耦系统的变结构(滑模)控制问题,分析了用广义系统变结构控制方法设计感应电机系统的可行性与优越性,并给出了感应电机解耦系统的控制方案。

    This paper describes the important application of variable structure control ( VSC ) theory on induction motor ( IM ) decoupling control system . A desigen scheme using singular sys-tem variable structure control method for a decoupling IM system is presented .

  13. 注塑机料筒多段温度PID神经网络解耦控制系统

    PID Neural Network Control System for Temperature of Plastic Injection Machine

  14. 多变量V规范型解耦控制系统设计

    Design of Multivariable Control Systems by Decoupling Method of the V-Norm Type

  15. 基于PID神经元多层网络的多变量解耦控制系统

    The Multiple Variable Decouple Control System Based on Multiple Layer Network With PID Neurons

  16. 一种新的PI调节器在交流解耦控制系统中的应用

    An Application of a Novel PI Regulator in A.D. Decoupling Control Systems

  17. 一类可解耦MIMO系统的模型跟随变结构控制

    Control of model-following variable structures for a class of able-decoupled MIMO systems

  18. 基于PC与IPM感应电机解耦控制系统的研制

    The Decoupling Control System of Induction Motor Using Industrial PC and IPM

  19. 一种基于核ridge回归的解耦控制系统

    A Decoupling Control System Using Kernel Ridge Regression

  20. BTT导弹的变结构解耦控制系统设计

    Decoupling System Design Based on Variable Structure System for BTT Missile

  21. 在分散解耦的系统框架上,提出了基于MIMO过程互相关函数的神经网络解耦器在线学习算法。

    Online learning algorithm of Neural Network Decoupler , which based on MIMO cross-correlation function , is proposed on the frame of distributed decoupling system .

  22. 注塑机料筒温度是一类多变量、强耦合、大惯性控制对象,本文根据注塑机料筒温度控制的要求,利用PID神经网络构成多变量解耦控制系统。

    The paper shows PID neural network control system for temperature of plastic injection machine . The multivariable strong-coupled properties of the system are analyzed and the structure and the algorithm of the PID neural networks are given .

  23. 分析了统一潮流控制器并联变换器在电力系统中的调节作用以及工作原理,建立了并联变换器的数学模型,提出了一种改进的双环PI解耦控制系统。

    The operation principle and function of Unified Power Flow Controller ( UPFC ) in power system is analyzed and mathematic model of UPFC shunt inverter is established . This paper proposes an improved double close-loop decoupling control system .

  24. 利用包含原理的约束和聚集条件对系统进行重叠结构分解后,在扩展空间的系统中设计解耦子系统的分散LQ控制。

    The overlapping structure of the interconnected system is decomposed according to the inclusion principle . Based on this conclusion , a decentralized LQ control lan of decoupled subsystems in expanding dimension system is designed .

  25. 基于最少拍的一种解耦控制系统与仿真

    Decoupling Control System and Simulation Based on Dead - beat Control

  26. 球磨机智能解耦控制系统的一种实现方法

    Neural decoupling control system for ball mill realized by three neurons

  27. 流浆箱神经网络解耦控制系统的设计

    The design of a practical headbox neural network decoupling control system

  28. 磁悬浮实验列车模型的解耦控制系统

    The decoupled control system of the magnetic suspension test vehicle model

  29. 借助正合模型匹配方法设计解耦控制系统

    Design of decoupling control system with exact model matching method

  30. 细长体双自旋卫星消旋主动章动控制动力学解耦的系统仿真

    A Dynamics Decoupled System Simulation for the DANC of Prolate Dual-Spin Satellite