自动规划

该方法有利于实现从三维CAD系统到装配序列的自动规划，最后以实例通过MATLAB编程说明该方法的可行性。

This method was favorable to realize the automatic planning from the three-dimensional CAD system to assembly sequence . The feasibility of the method was explained by MATLAB program .

该系统已经进入试运行阶段，经过验证实现了CI与NCC/BCC的自动规划功能，较好的提高了北京移动规划人员的工作效率，得到了用户北京移动的高度好评。

This system has been running into the trial stage . By the verification of user , the system has achieved the function of CI and NCC / BCC automatic planning , and has received the high favorable comments from Beijing Mobile .

基于GIS的配电网自动规划系统的设计

Design of distribution automation planning system based on GIS

一种基于Petri网表示的自动规划方法和算法

An Antomatic Planning Approach and its Algorithm Based on Petri Net Representation

一种改进的自动规划GUI测试用例生成方法

An Improved Test Cases Generation Approach for GUI Based on Automated Planning

基于ARX的水泥输送线路自动规划系统

The Layout System of Cement Transportation Line on the basis of ARX

本论文针对一套典型的柔性制造实验系统，本着面向生产实际和面向用户的原则，在Windows环境下，对该系统的加工过程自动规划和仿真系统进行了研究和开发。

In this paper , a process auto-programming and simulation system is established under Windows environment according to the production-oriented and customer-oriented principle . The system is based on a typical flexible manufacture experiment system .

依据这些理论和算法在MDT平台上开发了一个箱体类产品的装配顺序自动规划系统，并以一个齿轮减速器为例进行了验证。

According to the above theories and algorithms , an assembly sequence automatically planning system , which is applied to box product assembly sequence planning , is developed based on the MDT platform and the system is validated by a example of gear reducer .

或者由操作员指定攻击目标后，任务系统自动规划飞行轨迹和飞行操作指令，由飞控系统控制UCAV自主飞行到最佳攻击区域完成对目标的攻击。

Another operation mode in this level is : the operator designates the target to be attacked , and the mission system will plan the flight route and flight operation instruction automatically , control the UCAV autonomously by the flight control system for flying to the optimum area for attacking .

冗余度机器人作业区域轨迹的自动规划

Automatic Trajectory Planning of the Operating Area of a Redundant Robot

汽车总装配工艺的快速自动规划研究

Research on fast & automated process planning of automobile final assembly

工件定位方案的自动规划与定位误差分析

Automated Planning of the Locating Scheme of Workpiece and the Locating Error Analysis

基于产品计算机辅助设计模型的装配序列自动规划

Automatic Planning of Assembly Sequence Based on Computer Aided Design Model for Product

一个基于知识的电网调度操作票自动规划系统

An automatical planning system based on knowledge for the dispatching of power network

基于几何推理的装配序列自动规划研究

Automatic Assembly Process Planning Based On Geometric inference

空间焊缝弧焊机器人焊接路径自动规划研究

Research on the automatic planning of arc welding robot welding path for space weld

网流直流法在输电网络自动规划中的应用

The application of D. C. mesh flow method to automated planning of transmission networks

瞬心寻找方案的自动规划及虚约束的识别

Automatic Programming of the Plans for Instantaneous Rotation Center Searching and Recognition of Virtual Restrictions

基于配合特征的机械装配自动规划

Mating feature based automatic mechanical assembly planning

自动规划技术同样也已日臻成熟。

Scheduling is likewise ripe for automation .

本设计优势主要是具有直接的网络管理和网络自动规划功能；

It has direct network management and automatic planning function of network to originally design the advantage ;

任务规划软件包括自动规划模式和手动规划模式两种核心的使用模式。

The mission planning software includes automatic planning model and manual planning model as two cores working model .

本文提出了一个选择电力系统交流联络线的自动规划模型。

This paper proposes an automatic planning model for the selection of tie lines between electrical power systems .

通过利用自适应的工作流技术，支持基于仿真的产品设计过程的自动规划；

The automatic planning based on simulation product design process is supported by using the adaptive work flow technology .

在研制的四轴线结构光扫描系统平台上，提出了一种三步扫描数据补偿路径自动规划方法。

With the four axis motion system , a three-step scanning method is used to determine the scanning path automatically .

焊缝坡口的填充情况是球罐纵缝多层焊接规范参数自动规划和调整的一个重要依据。

Filling of weld groove is a very important gist for welding parameters programming and regulating during longitude seam welding of spherical tank .

提出了一个保证公差要求的装夹方案和特征加工顺序自动规划方法。

A novel approach to automatic setup planning and operation sequencing , on the basis of tolerance requirements of the part , is proposed .

文中详细介绍了加工过程自动规划和仿真系统的具体设计。

It is very important for the entire system . The concrete design of the process auto-programming and simulation system is presented in detail .

加工过程自动规划和仿真系统的测试结果表明该系统达到了预期的目标。

The test of the auto-programming and simulation system and the running of the flexible manufacture experiment system prove the system has reached its design requirement .

产品装配顺序规划是装配工艺设计的关键技术，对装配顺序自动规划的需求越来越迫切。

Assembly sequence planning is a key factor in assembly planning , therefore it is imperative to develop a method for automatic planning of assembly sequence .