脉冲电弧

GMAW脉冲电弧对Nd∶YAG激光能量的吸收

Absorption of GMAW pulse arc to Nd : YAG laser power

脉冲电弧离子源镀膜均匀性的研究

Study on the Deposition Uniformity of Pulsed Arc Ion Source

本文采用脉冲电弧离子镀的方法，在p型硅上沉积类金刚石薄膜，用椭偏法测试薄膜的光学常数。

Optical properties characterization with ellipsometry of the diamond-like carbon films , grown on p-type Si substrate by pulsed arc deposition , has been successfully developed .

新型IGBT递变式脉冲电弧喷涂实用装置

A novel applicable IGBT inverter for pulsed arc-spraying

研制成功了一种动态特性优异、具有双阶梯形静态外特性、能快速切换的三极管焊接电源，并发展了一种新的MIG脉冲电弧控制方法（称为QH&ARC法）。

The authors developed a new transistor power source which can give a dual-step static characteristic with high dynamic property and rapid changeover capability . The authors suggested also a new method ( QH-ARC method ) for controlling welding arc .

将锡箔包裹的试样投入带盖石墨坩埚中，第一步先在脉冲电弧炉中于660℃左右热分解，试样中各种形式的氧以Li2O形式保留在生成的锡锂合金中；

The sample in tin leaf clad is put into a graphite crucible with a cap . Firstly , the sample is decomposed by heat at about 660 ℃, and the multiform oxygen in the sample is reserved in tin-lithium alloy by the Li2O form .

脉冲电弧沉积类金刚石薄膜的厚度建模

Thickness modeling of diamond-like carbon films by pulsed vacuum arc deposition

脉冲电弧对钨铜电极表面侵蚀形态的研究

Investigation of WCu Electrode Erosion Morphology Under Impulse Arcs

脉冲电弧离子镀中的放电稳定性

The discharging stability of the pulsed vacuum arc deposition

高频脉冲电弧的电特性及引弧性能的研究

Study on the electrical and arc striking characteristics of high frequency pulsed arc

脉冲电弧放电产生医用一氧化氮的放电条件研究

Study on Pulsed Arc Discharge Conditions on Production of Nitric Oxide for Medical Application

脉冲电弧放电电离有机溶液制备碳膜的研究

Investigation on the preparation of carbon films from organic solutions by pulsed arc discharge

脉冲电弧源的发射特性建模

Modeling of emission properties of pulsed arc source

利用脉冲电弧放电电离甲醇溶液在常压下研究了含金刚石成分的碳膜的制备。

Carbon films containing diamond have been prepared from methanol solution by pulsed arc discharge at atmospheric pressure .

直流脉冲电弧等离子体由甲醇/氨水溶液液滴通过高压电极时诱导放电产生。

The direct current pulsed arc discharge plasma was excited using drops of methanol and ammonia water passing between high voltage electrodes .

低浓度的一氧化氮（NO）在临床应用方面有着重要的作用，脉冲电弧放电是获得低浓度医用NO的一种有效方法。

Low concentration of nitric oxide has a significant effect on clinical medicine , and pulsed arc discharge is an effective method to obtain medical nitric oxide .

脉冲电弧离子镀膜技术是近几十年来新发展的一种镀膜方法，有着广阔的应用前景。

The pulsed vacuum arc deposition ( PVAD ) is a new technique of coating , which is developed in recent decades , and have widely promising usage .

利用脉冲电弧镀技术在硅基片上沉积类金刚石薄膜，研究薄膜的光谱特性、摩擦磨损特性、硬度、电阻率和稳定性。

Diamond-like carbon ( DLC ) films are grown on silicon substrate by pulsed arc deposition . The films ' optical properties , wear properties , hardness , anti-resistance and chemical stability are researched .

脉冲电弧源是脉冲电弧离子镀方法制备薄膜的重要部件，其发射特性是影响薄膜均匀性的重要因素。

Pulsed arc ion emitter or source is an integral part of pulsed arc thin film deposition process , and its emission ( properties ) play a key role in the films ' uniformity .

脉冲偏压电弧离子镀（TiMe）N多元复合硬质薄膜研究

Study on Multi-Component ( TiMe ) N Hard Coatings Synthesized by Pulsed Bias Arc Ion Plating

用TV摄象机对脉冲焊接电弧长度的采样控制

Study of sampling and controlling MAG welding arc length by TV camera

利用脉冲真空电弧离子镀技术镀制DLC膜改善TiNi合金的表面性能。

The surface property of Ti-Ni alloy is improved by preparing DLC films .

低碳钢CO2激光-脉冲MAG电弧复合焊接工艺研究

CO_2 laser-pulsed MAG hybrid welding of mild steel

脉冲偏压电弧离子镀室温沉积非晶TiO2薄膜

Room temperature deposition of amorphous tio_2 film by pulsed bias arc ion plating

Nd：YAG激光+脉冲MAG电弧复合热源规范参数对平板堆焊焊缝表面成形的影响

Influences of Welding Parameters on Weld Appearance in Nd : YAG Laser + Pulsed MAG Hybrid Cladding

利用直流和脉冲偏压电弧离子镀技术沉积TiN硬质薄膜，研究了不同偏压下基体的沉积温度、薄膜的表面形貌及力学性能。

TiN hard coatings were prepared by arc ion plating ( AIP ) with dc and pulsed biases , respectively . Systematic examinations and comparisons were executed on the temperature of substrates , the surface morphology and mechanical properties of the films .

脉冲偏压电弧离子镀C-N-Cr薄膜的成分、结构与性能

Composition , microstructure and properties of C-N-Cr films deposited by pulsed bias arc ion plating

用磁过滤脉冲真空电弧沉积方法制备了CoPt（FePt）C纳米复合薄膜，并在不同温度下进行了退火处理，研究了薄膜中碳的含量以及退火温度对薄膜结构与磁性能的影响。

CoPt ( FePt ) C nanocomposite thin films were prepared by a pulsed filtered vacuum arc deposition technique . Thermal annealing was performed in vacuum at various temperatures . The dependence of the magnetic properties on the carbon fraction and annealing temperature was studied .

本文采用同步电流、电压、高速摄像及光谱信息的采集方法，系统地研究了未复合脉冲MAG电弧和激光复合电弧的物理过程，并对激光加入前后电弧的变化作了对比。

In this paper , systematically studied pulse MAG welding and laser-pulse MAG welding , and contrasted the change of the arc before and after joined the laser , with the method of synchronous collecting current , voltage , high-speed camera and the spectral information .

脉冲真空电弧离子镀发射特性的测量

Measuring on emission characteristic of pulse vacuum arc ion deposition