纯净钢
- 网络Clean Steel;purity steel
-
通过对La在高纯净钢中合金化作用的研究,结果表明,固溶La对γ→α相变产生明显的影响,细化铁素体晶粒,提高了硬度。
Alloying effect of La in high purity steel was investigated . It is shown that the effect of solution La on γ→α phase transformation was remarkable . The ferrite grains were fined and hardness was increased .
-
镧在纯净钢中的几种存在形式
Existing Forms of Rare Earth Element La in Purity Steel
-
稀土元素La对碳锰纯净钢组织和冷却转变的影响
Effect of La Element on Microstructure and Cooling Transformation of Carbon - Manganese Purity Steels
-
RH真空精炼是大批量生产优质纯净钢的重要手段。
RH vacuum refining technology is a powerful method of producing clean steel .
-
应用TEM,SEM和XRD研究碳锰纯净钢中镧的存在形式,分布和合金化行为。
Alloying behaviors of La in carbon-manganese cleanliness steel were investigated by TEM , SEM and XRD analysis .
-
利用微观偏析和化学反应相耦合的计算方法,对稀土碳锰纯净钢中的La、P在体系凝固过程的偏析和化学反应进行了计算。
The coupling calculation method about segregation and reaction were made on carbon-manganese purity steels with rare earth to study the behavior of elements La and P during solidification .
-
利用SEM电镜、能谱分析仪、以及等离子光谱分析仪,对稀土镧在纯净钢中的固溶规律及夹杂物的转变规律进行了研究。
By SEM , EDS and ICP spectral analysis , the solution law of La and the transformation law of inclusions are investigated in present work .
-
150t钢包炉生产铝镇静纯净钢的实践
Production of Al-killed clean steel with 150 t ladle furnace
-
通过显微组织观察和对临界转变温度的测定,研究了稀土元素La对碳锰纯净钢组织和冷却转变过程的影响。
The effects of rare earth element La on microstructure and cooling transformation of carbon-manganese purity steels were investigated by microstructure observation and phase transformation critical temperatures determination .
-
在碳锰纯净钢的冷却转变过程中,随La含量的增加,先共析铁素体开始析出温度降低,析出速度加快,共析转变开始温度降低。
During the cooling transformation process of carbon-manganese purity steels , the precipitation starting temperature of pro-eutectoid ferrite and eutectoid decreases and the precipitation speed increases with increasing La content .
-
电弧炉采用热装铁水冶炼纯净钢是目前世界上流行的一种工艺,对于配置EAF、LF、CCM的短流程钢厂来讲,充分发挥EAF的功能,是生产纯净钢的关键。
Making clean steel with hot metal charge is a new technology . To make full use of all the potentials of EAF is the key for mini-mills equipped with EAF , LF , CCM .
-
1000MW核电管板用纯净钢的冶炼及效果
Smelting Process and Its Results of Clean Steel Used for 1000 MW Nuclear Power Tube Plate
-
1000MW核电管板纯净钢锻件制造工艺及其性能
Manufacturing process and mechanical properties of forged clean steel tubesheets for 1000 MW nuclear power plant
-
通过观察纯净钢中稀土夹杂物的形态,测试电化学腐蚀EIS谱和极化曲线,研究稀土元素镧对纯净钢耐腐蚀性能的影响。
Study is made of the impact of La on the corrosion resistance of pure steel through the observation of the morphology of RE inclusion in the pure steel , testing of electro-chemic corrosion EIS and polarization curve .
-
低磷钢是纯净钢生产的重要部分,从钢包回磷控制和脱磷、锰铁合金脱磷两方面开展低磷钢冶炼的相关理论及工艺研究。
Low phosphorus steel is an important part of clean steels .
-
电弧炉热装铁水生产纯净钢的技术
Technology of clean steel production with hot metal charge on uhp-dc-eaf
-
镧对纯净钢夹杂物和耐腐蚀的影响
Impact of La on Inclusions and Corrosion Resistance of Pure Steel
-
镧在碳锰纯净钢中合金化作用的研究
Study on Alloying Behavior of La in Carbon - Manganese Cleanliness Steel
-
因夹杂炉渣或耐火材料颗粒而造成的不纯净钢。
Dirty steel due to entrapment of slag or pieces of refractory .
-
生产纯净钢迎接新世纪挑战
Produce pure steel to meet the challenge of new century
-
高纯净钢的生产
Manufacture of high purity solanesol PRODUCTION OF HIGH PURITY STEEL
-
含铜低碳高纯净钢的固溶与时效工艺
Solution and Aging Process of High Purity Steel Containing Copper
-
零夹杂超级纯净钢精炼理论与工艺探讨
Thermodynamic Fundamentals for Zero Inclusion Super Clean Steel and the Refining Process
-
电炉纯净钢生产的初步实践
Clean steel making in the EAF on tentative experience
-
超纯净钢冶炼技术
Production Technology for Superior Pure Steel The Super Acid
-
稀土碳锰纯净钢表面钝化膜性能研究
Study on Passive Film of Carbon - Manganese Purity Steels with Rare Earths
-
微合金化高纯净钢及其性能
High Purity Steel With Microalloying and Its Properties
-
从废钢冶炼纯净钢新流程的讨论
Discussion on new process making Clean-Steel from scrap
-
稀土对碳锰纯净钢纵向冲击性能的影响
Effect of rare earth on longitudinal impact property of carbon - manganese clean steel
-
发挥炉外精炼优势促进高纯净钢生产
To Bring into Play Out-of-furnace Refining Advantage in Promoting Production of High Cleanliness Steel