首页 / 词典 / good

磨光

mó ɡuānɡ
  • polish;grind;burnish;rub-down;wear down;pumice;put a gloss on
磨光磨光
磨光 [mó guāng]
  • [polish] 用磨料磨物使光滑

  • 把铁板磨光

  1. 而同种材料间义齿基托组织面、磨光面菌落数则无显著差异(P005)。

    However , the significant difference between the tissue surface and polish surface of the same material as base ( P0 05 ) was not discovered .

  2. 请告诉我你们定义磨光水平的标准方法。

    Please give me your normal method of indicating polish level .

  3. 用细砂纸最后磨光。

    Use a finer piece of sandpaper to finish .

  4. 表面磨光以后,刻入或画上图案。

    After the surface is polished , a design is incised or painted .

  5. 硬度较低的石头磨光滑了。

    The softer rock wears away .

  6. 岩石由于水的作用而被磨光。

    Rocks are worn smooth through the agency of water .

  7. 溪流把石头都磨光滑了。

    The stream wore the stones smooth .

  8. 将这件木器原来的漆烧掉,填补好上面的裂缝,再用砂纸磨光。

    Burn off the old paint , fill any cracks in the woodwork , and rub down well with sandpaper .

  9. 它通过磨光器反复地擦变得光滑

    It was smoothed down by rubbing with a burnisher .

  10. 玉石匠开凿、磨光或雕刻''。'玉石'。''的人

    One who cuts , polishes , or engraves gems .

  11. 他是一位宝石鉴定家,专门切割,磨光,及雕刻珍贵的钻石。

    He is a professional lapidary who cuts , polishes and engraves precious stones .

  12. B样条磨光函数在观测点变形过程线修匀中的应用

    Application of B spline and smooth function in smoothing of displacement course curve

  13. 角点G~k磨光的分片代数曲面方法

    G ~ k Blending of Corners with Piecewise Algebraic Surfaces

  14. 磨光(blending)是指在曲面之间构造光滑过渡曲面的一种操作。

    Blending is an operation of constructing smoothly connecting surface between surfaces .

  15. B样条与磨光样条在基于矩形格网的DEM内插中的应用

    Application of B Spline and Smoothing Spline on Interpolating the DEM Based on Rectangular Grid

  16. 本文提出了一种采用B样条磨光函数修匀观测点变形过程线的方法。

    In this paper a method to smooth the displacement course curve , based on B spline and smooth function , is proposed .

  17. 对连续性不满足外推要求的荷载函数进行了磨光,使q(x,y)∈C3(Ω)。

    Load functions which don 't satisfy extrapolations are polished to make ? ( x , y )∈ C_3 (Ω) possible .

  18. 运用对函数进行磨光法得到的具有二阶连续导数,作为原来函数f(x)的最佳逼近元,与其它的逼近函数进行比较,分析了各自的优缺点。

    As an element of best approximation comparing with other approximating function , it gives the advantages and disadvantages of various functions .

  19. 本文研究了B样条和磨光样条应用在基于矩形格网的DEM内插中的思想、方法及实现过程。

    This paper studies the method and process of interpolating the DEM based on rectangular grid with B spline and smoothing spline .

  20. 采用B样条曲线对实测数据进行磨光,可以保证压力导数曲线具有很好的光滑性、光顺性和逼近度。

    In the paper , the method , using B - spline curve to smooth measured data , can ensure the pressure derivation curve has better velvet , smoothness and fidelity .

  21. 我们用B样条磨光技术在不改变积分值的前提下磨光特征函数,用可微的权重函数代替特征函数,提高了采样的质量。

    We use B-spline smoothing technique to smooth the characteristic function without changing the integral quantity and get a differentiable weight function . The method considerably improves the quality of sampling points .

  22. 最后对Mortar型P1协调有限元的瀑布型多重网格法进行了数值实验,采用Richardson迭代作为磨光算子。

    Finally , we carry out the numerical experiments for the case of P_1 conforming element by using Richardson iteration as a smoother .

  23. 车身外形CAGD中磨光三角域曲面的计算和应用

    Calculation of Polished Triangle Surface and Its Application to Autobody CAGD

  24. 对外加工:印刷、满版UV及局部UV、丝印、过胶、过油、磨光、烫金、裱、啤、粘等。

    External processing : print , full version of UV and local UV , screen printing , laminating , varnishing , polishing , bronzing , mounted , beer , sticky and so on .

  25. 与此同时,从明年春天开始,专门制作袖扣的SimonCarter公司将对其部分设计的系结机制推出有凸边的磨光,以提高袖扣的稳固程度。

    Meanwhile , from next spring cufflink specialists Simon Carter will introduce knurled finishes to the fastening mechanism of some of its designs to provide better grip .

  26. 随着精密铸造、放电加工、CAD/CAM加工、焊接、磨光等技术的发展,钛及钛合金在口腔修复医学中的应用研究更加深入,应用范围不断拓宽。

    P. Ti and titanium alloys . With the development of the technics of precision casting , sparking crosion , computer-aided design and computer-aided manufacturing ( CAD / CAM ), soldering , Finishing and polishing , the practical research on C.

  27. C组的折裂面用800目碳化硅耐水砂纸湿磨光1min后,再黏接,制成棒状试件。

    The fractured surfaces of Group C were polished with 800-grit SiC sand paper for 1 minute and bonded and then sectioned into bar-shaped specimens .

  28. 用USSA语音频谱分析系统对不同磨光面外形全口义齿患者的语音分析

    Analysis of the phone of complete dentures with varions polished surfaces on USSA digital sonagraph

  29. 最后,对第一种情形进行了数值实验,分别采用Richardson迭代、SOR迭代和共轭梯度法(CG)作为磨光算子。

    We carry out the numerical experiments in the first case by using Richardson method , SOR iteration and the conjugate gradient method ( CG ) as smoothers , respectively .

  30. 本文的主要工作分为以下几个部分:在第三章中,针对当前大多数磨光方法最多只能磨光三面角的情形,提出了G~1磨光凸n(n≥3)面角的方法。

    The thesis is organized as follows : In chapter 3 , we present methods to blend arbitrary convex n & hedral ( n ≥ 3 ) angle with G ~ 1 continuity considering that most blending methods can only blend trihedral angle . Two methods are proposed .