真空蒸镀

聚焦型太阳能集热器真空蒸镀Al反射膜工艺研究

Study on vacuum evaporation technology of Al-REFLECTIVE film in solar energy heat-collector

利用真空蒸镀方法，在PET柔性衬底上制备了有机电致发光器件。

The organic light-emitting devices ( OLEDs ) were fabricated by vacuum evaporation method on PET flexible substrate .

真空蒸镀SiOx膜的特性及加工应用

Vacuum SiO_x-coated Film : speciality , Processing and Application

采用传统的真空蒸镀工艺获得较好膜层质量，膜系采用非晶TiO2与金属Ag交替生成TiO2/Ag/TiO2三明治结构。

This multilayer system is deposited with amorphous TiO_2 and Ag alternately by conventional evaporation .

强磁场对真空蒸镀制取Te薄膜的影响

Effect of high magnetic field on Te films prepared by vacuum evaporation

用真空蒸镀法在室温Si基片上制备了Ag薄膜，并用X射线衍射及反射式椭偏光谱技术对薄膜的微结构和光学常数进行了测试分析。

Ag films , grown on Si substrates by vacuum deposition , were studied with X ray diffraction and reflecting ellipsometry .

在柔性基上真空蒸镀ITO膜

Vacuum Deposited ITO Thin Film on Soft Substrate

利用物理气相沉积（PVD）真空蒸镀法，研究铬钛合金装饰膜。

Vacuum evaporated film of Ti-Cr alloy has been studied .

真空蒸镀WO3薄膜电致变色的EXAFS研究

EXAFS Study of Microstructure of the Electrochromic WO_3 Film

本文研究了金属取代酞菁衍生物（MPc）真空蒸镀薄膜在可见及近红外区域的吸收光谱和光学常数。

Both optical absorption spectra and optical constants of vacuum sublimed films ofa metal substituted phthalocyanine comPOund ( MPc ) were studied .

利用薄膜工艺和微细加工技术，将NiFe合金或NiCo合金真空蒸镀或溅射在玻璃或石英基片上，制作的磁阻传感器具有广泛的用途。

By use of thin-film technology and microprocessing technique Ni-Fe or Ni-Co alloy is evaporated or sputtered in vacuum onto glass or quartz substrate . Reluctive sensors made in such way have wide application .

对真空蒸镀在Si（111）衬底上的钻膜及退火后在CO/Si界面形成的钻硅化物薄膜进行了研究。所用仪器为X光衍射仪和改进型Read相机。

Cobalt thin films e-gun evaporated on Si ( 111 ) substrates and silicides formed during annealing at the Co / Si interface have been analysed by both X-ray diffractometer and the Read camera ( the modified Debye camera ).

本文分别采用了真空蒸镀法和惰性气体中蒸发法制备了沉积在SiO2基片上的InSb纳米微粒。

This paper describes the details of using vacuum evaporation method and the method of evaporation in inert gas to synthesize Insb nanocrystals on SiO2 substrate .

真空蒸镀Al-Cu-Fe准晶材料的镀膜研究

Thin Films of Vapor Plating with Al-Cu-Fe Quasicrystals

采用以共沉淀方法制备的NiCe复合粉末、真空蒸镀W的金刚石等为原料，热压活化烧结，制取了具有高强度、高硬度的稀土金刚石增强WC10%Co5%Ni硬质合金复合齿。

WC-10 % Co-5 % Ni cemented carbide enhanced by rare-earth and diamond was prepared in a hot-pressing activated sintering process with Ni-Ce composite powder produced with coprecipitation technology and diamond plated W by vacuum vapor deposit .

用原子力显微镜（AFM）和X射线光电子能谱（XPS）研究了真空蒸镀聚乙烯咔唑（PVK）薄膜的表面形貌和PVK/铟锡氧化物（ITO）界面电子状态。

The surface morphology of vacuum vapor deposited poly ( N vinylcarbazole )( PVK ) thin film and the PVK / indium tin oxide ( ITO ) interface are studied by using the AFM and XPS respectively .

通过对比镀覆金刚石增强型硬质合金复合齿和普通金刚石增强型硬质合金复合齿的磨耗比、抗冲击韧性，说明添加真空蒸镀W的金刚石的复合齿具有良好的抗冲击性能和耐磨性。

This paper contrasts wear ratio and impact resistance of normal diamond enhanced carbide tungsten composite button with that of plated diamond enhanced carbide tungsten composite button , and it shows that vacuum W-plated diamond enhanced carbide tungsten composite buttons have excellent impact resistance and wear ratio .

采用真空蒸镀法在AA型MH/Ni电池储氢合金电极上镀覆了一层厚约0.1μm的Ni膜·考察了其对MH/Ni电池性能的影响。

The metal-hydride electrode of the AA-size MH / Ni battery was modified with a thin nickel film about 0 . 1 μ m using vacuum evaporate plating technology . Influence of the surface modification on the performance of the MH / Ni batteries was studied .

本论文采用离子束辅助反应电子束真空蒸镀法，以Ti为膜料，纯度为99.99%的O2为反应气体，通过电子束蒸发，在玻璃衬底上反应生成TiO2薄膜。

In this article , TiO_2 films are prepared on glass substrate by ion beam assistant thermal oxidative electron beam evaporation . Ti ( AT2 ) is used as the evaporated material and high purity O_2 ( 99.99 % ) is used as the thermal oxidative gas .

采用电阻加热式真空蒸镀法在玻璃、H13钢、塑料和纯铜基体上镀制铝膜，并对其附着力进行了测试和分析。

Aluminum film is produced on glass , H13 steel , plastic and pure Cu substrate by resistance heating vacuum evaporation , and the adhesive power of aluminum film is determined and analyzed .

TiB2-BN复相陶瓷具有方便的电性能可设计性和优良的机加工性等，其作为真空蒸镀，尤其是真空镀铝的蒸发容器被广泛使用。

TiB_2-BN composite has a great application as evaporation source in vacuum evaporation , especially in evaporating aluminium , owing to its designability of resistivity and excellent machinable property .

用带特殊热（冷）阱的可控制基片温度的电阻加热式真空蒸镀薄膜装置，把吸收透明导电薄膜Au和In2O3分别通过热蒸镀和活化反应淀积在玻璃基片上。

In a resistance thermal vacuum evaporator with a special heater ( coolant ) holder , which can control the sample substrate temperature , Au and In 2O 3 films were deposited on glass slides by a thermal and an activated reactive evaporation technique , respectively .

应用真空蒸镀处理技术，在金刚石单晶表面蒸镀金属铬层，并在真空高温条件下，部分铬与金刚石键合生成Cr7C3，有效地提高金刚石表面对金属粘结剂的粘结力。

Vacuum evaporation coating is applied to the surface of diamond monocrystal to form a metallic chrome layer on it and , at high temperature , part of chrome is bonded together with diamond to form Cr_7C_3 , thus improving efficiently the bonding strength of metal bonder to diamond surface .

真空蒸镀装饰膜工业化生产中的若干问题

Some problems in the industrial production of ornament film by vacuum evaporation

一种新型光谱选择性吸收涂层&真空蒸镀黑铝涂层

A New Kind of Spectral Absorbing Coating & Vacuum Evaporated Black Aluminium

以金属铬和铬钛合金进行真空蒸镀。

Cr or Cr - Ti alloy was used in vacuum evaporation .

金刚石表面真空蒸镀的微观现象和实用研究

The Microphenomenon and Practical Research of Vacuum Evaporation Film in Diamond Surface

真空蒸镀聚乙烯醇薄膜

Vacuum Evaporated Poly ( Vinyl Alcohol ) Thin Films

真空蒸镀金属包装材料的技术进展

The Development of the Vacuum Metallized Materials for Packaging

手表表盘真空蒸镀彩色铬膜

Colour chrome films deposited by vacuum evaporation on the dial plate of watch