真空烧结炉

采用以MCS-51系列单片机为核心的微机对真空烧结炉进行温度控制。

The microcomputer based on the MCS-51 series single chip microcomputerachieves temperature control on the vacuum sintering furnace .

本文介绍了由两级计算机组成的低压真空烧结炉温度、压力控制系统及其采用的Fuzzy－PI双模态控制算法原理。

This Paper introduced the temperature pressure controlling system of low-pressure vacuum sintering-Furnace which is composed of two level computers and the theory of the adopted Fuzzy-PI two mode control algorithms .

参数自调整Fuzzy-PI控制算法在低压真空烧结炉中的应用

Application of a Self-tuning Parameter Fuzzy-PI Control Algorithm in the Low-pressure Vacuum Sintering Furnaces

以平均粒度013μm的TiC07N03超细原料制备超细TiCN基金属陶瓷，当用普通真空烧结炉烧结时，合金中存在大量的孔隙，造成合金性能非常差。

Properties of superfine TiC 0.7 N 0.3 cermet prepared with superfine powder ( average grain size of 0.13 μ m ) and sintered by conventional vacuum furnace were very inferior due to the porosity .

真空烧结炉漏气率对TiB2-Ni金属陶瓷性能的影响

Effect of the Leakage Rate of Vacuum Sintering Furnace on the of TiB_2 Ni Ceramet

在参与自贡硬质合金有限责任公司研制的DY-500型低压真空烧结炉自动控制系统设计和调试的基础上，本论文对实践工作进行了总结与提高。

At the base of participating in the system design and debug of the DY-500 HIP-Sinter Low-pressure and vacuum sinter stove which is investigated by the ZiGong horniness-alloy Ltd.

硬质合金真空烧结炉电发热体的设计与计算

Design and Calculation of Cemented Carbide Vacuum Sintering Furnace Heating Unit

2200℃片式钽电容器真空烧结炉的研制

Development of 2200 ℃ vaccum sintering furnace for chip Ta capacitor

低压真空烧结炉的微机控制和管理系统

A Microcomputer Control and Management System for Low-pressure Vacuum Sintering Furnaces

分析了真空烧结炉温度控制的特点；

Characteristic of temperature control of vacuum sintering furnace is analyzed .

用作真空烧结炉发热体的高温钼板材

High temperature molybdenum sheet for the heating elements for vacuum furnace

高真空烧结炉多模态控制研究

Study on Multi - mode Control System of High Vacuum Sintering Furnace

低压真空烧结炉两级计算机控制系统

The two-level Computer Control System of Low Pressure Vacuum Sintering-Furnace

真空烧结炉的微机集散模糊控制系统设计

Distributed and Fuzzy Control System on the Microprocessor of Vaccum Sintering Furnance

对真空烧结炉自动控制系统的电气改造

Electric Innovation of Automatic Control System for Vacuum Oven

真空烧结炉温控系统

The Temperature Controlling System of Vacuum Sintering - Furnace

基于参数自调整的真空烧结炉温度模糊控制系统

A temperature fuzzy control system for vacuum sintering furnace based on parameter self-adjustment

真空烧结炉的单片机控制系统

Monolithic Computer Based Control System for Vacuum Sintering Furnace

MCS－51系列单片机控制系统在真空烧结炉中的应用

The Vacuum Sintering Furnace Control System Based on MCS-51 Series Single Chip Microcomputer

低压真空烧结炉是硬质合金烧结的关键设备。

HIP-Sinter stove is one of the key equipments in the horniness-alloy 's manufacture .

改进结构防止真空烧结炉的泄漏

Improve construction to prevent leakage of vacuum furnace

真空烧结炉是生产硬质合金的关键设备，其烧结温度须严格按照所加工产品的生产工艺曲线进行控制。

Its sintering temperature must strictly obey the temperature control curve of the production technology of the processed products .

在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。

Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace .

然后，在工艺过程分析基础上设计了低压真空烧结炉自动控制工艺流程。

Then , at the base of analysis of the technics process , designed the autocontrol technics flow chart of HIP-Sinter stove .

主要研究在多气氛真空烧结炉中，通入不同的气氛对合金烧结后性能的影响，从而为烧结工艺的改进提供参考。

It is studied that sintering atmosphere effect on properties of cemented carbide , and giving some reference for improvement of sintering process .

双室多功能真空烧结炉的冷室用于烧结后制品的快冷、气淬或油淬；

Cooling chamber of the multi-purpose two-chamber vacuum sintering furnace is used for quick cooling ( gas quenching or oil guenching ) aftr sintering .

ZSD－50型高真空钽烧结炉的研制

The Development of Model ZSD 50 High Vacuum Ta Sintering Furnace

卧式真空热压烧结炉自动控制系统

Automatic Control System for Horizontal Vacuum Hot - pressing Sinter

真空热压烧结炉的研制

Design and Manufacture of a Vacuum Hot Press Sintering Furnace

本系统中的数字量由PLC控制，数字量主要控制真空系统、烧结炉和化学气相沉积炉中各通气管路中的开关量。

In the system the digital is controlled by PLC , digital is mainly used to control the switch data of pipeline in the vacuum system and metallurgical vessel and CVD vessel .