相分析

定量X射线衍射相分析中的增量法及其应用

The doping method in quantitative X-ray diffraction phase analysis and its application

铝灰中金属Al和Al2O3的物相分析

Phase Analysis on Aluminum Metal and Aluminum Trioxide in Aluminium Ash

多组分混合物X射线衍射直接定量相分析方法

Direct Quantitative Phase Analysis of a Multi-Component Mixture by X-Ray Powder Diffraction

X射线强度权重因子定量相分析

Quantitative Phase Analysis of Weight Factors of X-ray Intensity

古铜镜的X射线物相分析

X-ray Phase Analysis for Ancient Bronze Mirrors

通常的增量法X射线衍射定量相分析需用纯相作增量剂，条件苛刻。

The pure doping samples of single phase are necessary to the common doping me-thods in quantitative X-ray diffraction phase analysis .

针对珠钢CSP流程生产的V-N微合金钢，采用物理化学相分析方法、透射电镜的复型分析以及扫描电镜观察了流程中不同阶段试样的V（C，N）析出情况。

The physicochemical phase analysis , SEM and TEM analysis were used to observe the precipitates during EAF-CSP process .

用X射线衍射定量物相分析法.测定了不同产地EMD（电解二氧化锰）中不同晶型二氧化锰的含量。

Quantitative analysis of phase composition of EMD ( electrolytic manganese dioxide ) by X-ray diffraction method is introduced .

借助XRD进行相分析，对不同Fe含量的合金进行室温塑性、压缩性能和硬度测试；利用SEM对试样断口进行观察。

The phase is studied by XRD , room-temperature ductility , compress properties and hardness were investigated and the fracture surfaces were observed by SEM .

声表面波（SAW）器件的工作频率随基片表面上的负载质量变化而发生漂移，通常利用这一性质作气相分析与检测，已经有了若干用SAW延迟线器件制成的化学传感器。

Surface Acoustic Wave ( SAW ) device responds to Changes in the mass on its Surface with a shift in frequency and is most frequently used in gas-phase sensing applications .

用XRD对WS2纳米晶体进行了物相分析；

The phase analyses of nano WS_2 lubricating crystal were made in the experiment of XRD .

用XRD测试技术对钾长石焙烧前后及与添加剂共焙烧后的水不溶物进行了物相分析。

The phase compositions of potash feldspar and it 's calcined , and water insoluble substances of co-calcining of potash feldspar with additives were analyzed by XRD .

采用断口宏观观察、SEM分析和合金相分析等方法对其进行了断裂原因分析。结果表明，弹簧表面存在的加工缺陷，致使其在使用过程中因疲劳而断裂，疲劳核心在弹簧表面。

By means of fracture analysis , SEM and metallographic test , the research results showed that the broken mode is fatigue fracture which was the result of the spring surface defect .

对所收集的蒸发物进行成分及物相分析显示，蒸发物主要以NaCl和KCl为主，重金属Pb以双金属氯化物（KPb2Cl5）形式蒸发。

The analysis of compositions demonstrated that the collected volatile matter was mainly composed of chloride of NaCl and KCl , and Pb vaporized with the form of KPb_2Cl_5 .

本文研究了复合矿化剂中石膏在温度与CaF2的影响下的分解特性，并对熟料进行了物相分析。

The effect of temperature and CaF_2 on the decomposition characeristic of gyp - sum in combined mineralizer was studied , and the phases of the clinker were analyzed .

采用力学性能测试、DTA热分析、X射线衍射物相分析和透射电镜分析技术研究了时效工艺对固溶-冷拉处理的2011合金显微组织结构特征和力学性能的影响。

The effect of aging treatment on the microstructure and mechanical properties of solution treated and cold drawn 2011 alloy was investigated by mechanical performance test , XRD analysis , DTA thermal analysis and TEM observation .

研究了离子镀TiN涂层在500～700℃间的高温氧化特性，并利用SEM观察和XRD相分析研究了氧化产物的类型及膜失效机制。

The oxidation properties of TiN coating by ion plating at high temperature were investigated . By means of SEM and XRD , both the type of oxidation product and the failure mechanism of the coating were studied .

采用水热反应沉淀法制备纳米TiO2粉体，并用X射线衍射，TEM对其进行粒径测定、物相分析和形貌观察。

The nano TiO2 powder has been made by water-heat reacting precipitation process . The determination of diameter . Phase analysis and the observation of form and face of TiO2 powder have been made by x-ray diffractometer and TEM .

利用相分析技术、扫描电镜、透射电镜和EDAX能谱分析了连铸坯和板材中的第二相析出情况，利用Thermo-Calc软件在理论上分析了第二相的析出行为；

The phase analysis 、 SEM 、 TEM 、 EDAX energy spectrum and Thermo-Calc are used to analysis the composition , mass fraction and size distribution of the second phase particles .

渗氮钢表面化合物层的分层定量物相分析

Quantitative Analysis of Physical Phrase on Each Layer of Nitrided Steel

用神经网络与构造属性进行交互地震相分析

Interactive analysis of seismic facies using neural network and textural attribute

广西晚二叠世合山组沉积相分析

Sedimentary facies analysis of Upper Permian Heshan formation , Guangxi Province

桂林岩溶建造的相分析

Facial analysis of karst formation in Guilin phase and its significance

预还原锰矿的物相分析Ⅱ.铁的物相分析

Phase Analysis of Pre-reduced Manganese Ore II . Analysis of Iron Phases

高速钢相分析的计算机模拟

Computer Simulation for the Phase Analysis of High Speed Steels

卡文灰岩及其共生岩石的相分析

Facies analysis of the Cavan limestone and associated rocks

6710工业色谱用于尿素合成气相分析

Application of Model 6710 Process Chromatograph to Monitoring Synthesis Gas in Urea Plants

7种蝎毒的高效液相分析及毒理学研究

Analysis of high performance liquid chromatography and toxicologic study on seven kinds of

自动化干扰相分析在神经肌肉疾病中的应用价值

Values of automated interference pattern analysis in neuro-muscular diseases

织构钛合金轧板定量相分析

Quantitative Phase Analysis on Textured Titanium Alloy Sheet