燃气轮机燃烧室
- 网络gas turbine combustor;gas turbine combustion chamber
-
低NOx燃气轮机燃烧室的燃烧特性受到旋流的强烈影响,旋流特性的分析对燃烧室的设计和优化具有非常重要的作用。
The combustion characteristics of the gas turbine combustor with low NO_x emission are affected by swirl . The analysis of swirl characteristics is important to design and optimize the combustor .
-
燃气轮机燃烧室效率模化试验中压力指数的研究
Numerical Investigation of the Pressure Exponent in Gas Turbine Combustor Efficiency Similitude Study TESTING
-
低NOx排放微型燃气轮机燃烧室的数值模拟及实验研究
Numerical and Experimental Investigation on a Low NOx Emission Combustor for Micro Gas Turbine
-
气体燃料组分变化对SG2-6A燃气轮机燃烧室性能的影响
Effects of alternative fuel components on performances of a gas turbine combustor
-
LDA在燃气轮机燃烧室流场测量中的应用
Application of laser anemometry to flow measurement inside of gas turbine combustor
-
在燃气轮机燃烧室中,采用预混燃烧可以降低燃烧室的温度和降低NOx的排放。
NOx emission can be reduced with premixed combustion for it reduces the temperatures of gas turbine combustors .
-
该实验系统设计合理、功能完善、测量方法准确可靠,可用于常压和增压条件(0~0.3MPa)下微型燃气轮机燃烧室性能及相关燃烧技术的研究。
This experimental system can be applied to investigations on combustion techniques for the micro-gas turbine combustor and its performance tests both at ambient pressure and under pressurized conditions ( 0 ~ 0.3 MPa ) due to the reasonable design and perfect functions of the system and accurate measurement techniques .
-
注蒸汽燃气轮机燃烧室和后燃室中燃料系数的计算方法
A calculation method for the fuel coefficients of Stig combustion chambers
-
微型燃气轮机燃烧室实验系统与测量方法
Experimental system and measurement technique for the micro-gas turbine combustion chamber
-
燃气轮机燃烧室化学反应器网络模型研究
The Study of Gas Turbine Combustor Using Chemical Reactor Network Approach
-
舰船燃气轮机燃烧室壁温试验研究
An Experimental Study on Marine Gas Turbine Combustion Chamber Wall Temperatures
-
微型燃气轮机燃烧室性能的数值研究
Numerical Study on Combustion and Flow in A Micro Turbine Annular Combustor
-
合成气燃气轮机燃烧室的试验研究
TESTING Experimental Research on Gas Turbine Combustor for Burning Syngas
-
重型燃气轮机燃烧室设计与试验研究
Design and development test of a heavy-duty gas turbine combustor
-
某重型燃气轮机燃烧室的性能试验与调试
Performance Test and Debugging of Combustor of Heavy-duty Gas Turbine
-
燃气轮机燃烧室的射线工艺验证
Radiographic testing process technic verification of gas turbine combustor
-
现代激光测试技术在燃气轮机燃烧室测试中的应用
Application of Modern Measuring Technique to Gas Turbine Combustor
-
燃气轮机燃烧室双燃料切换过程控制
Control of Dual-fuel Exchange of Gas Turbine Combustion Chamber
-
出口温度场品质是燃气轮机燃烧室的重要安全性指标之一。
Exit temperature quality is an important safety indicator of gas turbine combustor .
-
燃气轮机燃烧室中贴体网格的生成与应用
Formation and application of body-fitted curvilinear grid system for modeling gas-turbine combustor flows
-
数值模拟在合成气燃气轮机燃烧室设计中的应用
Application of Numerical Simulation in the Design of Gas Turbine Combustor for Burning Syngas
-
燃气轮机燃烧室进气孔流量系数的数值模拟
Numerical Simulation Studies on the Discharge Coefficient of Gas Turbine Combustor Liner Air Holes
-
模型燃气轮机燃烧室中三元两相反应流的数值计算
Computations of three-dimensional two phase reacting flows in a model of gas turbine combustors
-
低污染燃烧是未来先进航空燃气轮机燃烧室的发展趋势。
Low pollution combustion will be a tendency for the future advanced gas turbine combustor .
-
而多旋流燃烧室是当前航空燃气轮机燃烧室设计采用的主要燃烧方式。
The multi-swirling dump combustion is the main combustion mode which gas turbine combustion design usually use .
-
本文给出一种模型燃气轮机燃烧室中三维气相反应流流场的数值计算结果。
This paper describes the numerical calculations of gaseous reacting flows in a model of gas turbine combustors .
-
本文针对含有强旋流的燃气轮机燃烧室三维湍流反应流的数值模拟问题进行了研究。
In this thesis , numerical simulations of three-dimensional turbulent reacting flow in gas turbine combustor were studied .
-
燃气轮机燃烧室燃烧流场的数值模拟氢燃料超燃冲压发动机燃烧室非结构网格数值模拟
Numerical Simulation Was Made of the Combusting Flow in the Gas Turbine Combustion ; Numerical simulations of hydrogen-fueled scramjet combustor flowfields on unstructured grid
-
本文通过中压全尺寸燃气轮机燃烧室空气加湿燃烧实验,研究了加湿度对燃烧特性的影响。
In this paper , an air humidified combustion experiment was carried out using mid-pressure full-dimension gas turbine combustor to determine the effects of humidity on combustion characteristics .
-
采用数值模拟方法对设计燃料为天然气和柴油的某型号燃气轮机燃烧室进行了改造,使其能够高效洁净地燃烧中热值的合成气。
Numerical simulation was used to retrofit a gas turbine combustor with diesel oil and natural gas as fuel in order to burning medium-heating-value syngas efficiently and clearly .