热风

rè fēng
  • Hot air;hot wind;hot-blast air
热风热风
热风 [rè fēng]
  • [hot wind] 具有高热和低相对湿度特征的风的一般术语,例如夏季沙漠地区的风或极端的焚风,也指感觉暖和的风

热风[rè fēng]
  1. 其优化工艺参数为:鱼体水分含量为35%,腌渍时间为36h,热风干燥温度40℃,熏制时间为3h,在此条件下制得的烟熏香糟鱼品质优。

    The optimal technical parameters are : water content in fish 35 % , pickling time 36 h , hot wind drying temperature 40 ℃ and fumigating time 3 h. Through these parameters , the end fumigating vinasse fish product has a excellent quality .

  2. 本试验在确认ZRH-1C型热风循环烘箱性能的基础上,采用干燥失重法,提出并验证该工序的最佳工艺参数。

    The test set up and validated any optimum parameters of drying process on the basis of confirmation of that ZRH-1C hot wind cycling oven worked regularly by the way of drying weightlessness .

  3. 下午,热风使火苗越燃越旺。

    During the afternoon , hot winds fan the flames .

  4. 股热风从火炉里吹出来。

    A blast of hot air came from the furnace .

  5. 热风加剧了这个问题。

    Hot winds add to the problem .

  6. 热风使庄稼干透了。

    Hot winds parched the crops .

  7. 基于PLC实现的热风炉自动控制系统

    Automatic Control System in Hot-Blast Stove Based on PLC

  8. 基于动态Markov的热风炉操作预测

    Application of Markov Method Based on Dynamic Clustering in hot-blast stove operation forecasting

  9. PLC在合钢3~热风炉改造中的应用

    Application of PLC in Repairing and Transforming for No.3 Air-heater BF in Hefei Iron & Steel Company

  10. 基于横向多晶硅二极管的CMOS兼容热风速计

    CMOS compatible thermal anemometer based on laterally polysilicon diodes

  11. 首钢热风炉运行过程CFD模拟

    Simulation of the hot air stove in Shougang with CFD

  12. PVC防渗膜采用无钉整体铺设工艺,膜间搭接采用热风焊接。

    The PVC membrane was laid without nails and hot air welding was used for overlaps .

  13. RH系列红外热风炉电控装置的研究

    Study on the electric control system of RH series infrared heat furnace

  14. DS顶燃式热风炉的特点及应用

    Features of top combustion stove and its application

  15. ACL顶燃式热风炉工业性试验

    Industrial experiment on top - combustion stove of ACL type

  16. 应用CBR技术对热风炉送风温度的预测

    Use the Technology of CBR to Predict the Temperature of the Hot Blast Stove

  17. 针对热风箱温度滞后的控制和卷绕过程中的非线性控制,本文提出了自调整因子模糊&PID复合控制器和PID参数自调整模糊控制器。

    The paper presents Self-regulation factor Fuzzy-PID controller and PID self-regulation fuzzy controller in order to control temperature lagging object and nonlinear object in taking-up device .

  18. 热风干燥和真空干燥相比,真空干燥后的苦瓜中的酚类物质的含量相对较高(P0.05),抗氧化能力相对较强(P0.05)。

    Compared to hot air dring , the bitter melon with vacuum drying has relative higher content of phenolic compounds and stronger antioxidant capacity .

  19. KF热风处理系统问题的对策

    Countermeasures to the problems in hot air system of KF drying device

  20. 用远红外辐射或热风干制红枣,其Vc、还原糖和总酸含量在整个过程中均下降。

    While drying Chinese jujube with far-infrared radiation or hot air , the contents of Vc , reducing sugar and total acidity reduced gradually in whole drying process .

  21. 但热风脱水处理后,其Se、V含量则减少,且地域不同其微量元素含量有所不同。

    The content of Se , V in Aster indicus was reduced in the dehydration process by hot gas . The content of trace elements depended on different growing areas .

  22. NCT系列热风烘茧装置结构性能及使用效果

    Structural Features and Application of NCT Serial Hot Air Cocoon Drying Systems

  23. 营养成分维生素C、胡萝卜素、维生素E和氨基酸的保存率分别比热风干燥蕨菜高63.4%、7.7%、61%和10%。

    Compared with heat-dried fiddlehead , the preservation rates of nutrition components Vc , carotene , Ve and amino acid of freeze-dried fiddlehead increased by 63.4 % , 7.7 % , 61 % and 10 % respectively .

  24. 小麦在干热风条件下的生理变化Ⅱ.干热风对小麦灌浆期~(14)CO2同化作用和~(14)C-同化产物累积的影响

    Physiological changes of wheat under the dry-hot-wind condition ⅱ . effect of dry-hot-wind on the ~ ( 14 ) co_2-assimilation and accumulation of ~ ( 14 ) c-assimilates during grain filling period in Wheat

  25. 采用混合气体的多相流分析方法,建立了热风加温系统的CFD优化模型,并仿真分析了温室系统相应的热环境分布。

    A CFD optimization model was built on the hot-blast heating system with multiphase flow analysis , and simulating and analyzing the corresponding thermal environmental distribution . 4 .

  26. 这些研究结论已被YB/T5012-1997《高炉及热风炉用砖形状尺寸》行业标准采用。

    Conclusions of the studies have already been adopted in YB / T 5012-1997 , the industrial standard Shapes and Dimensions of BF and hot stove bricks .

  27. 这对热风炉的优化设计与运行具有理论指导意义,对热风炉工艺操作参数的选择也具有实际的参考价值。FeO和MnO的影响较小。

    It is significant for the design and optimization of the hot air stove . The effect of FeO and MnO contents is not significant .

  28. ZSD顶燃式热风炉烧嘴改造的模拟研究与应用

    Simulation and Application on Burner Reform of ZSD Hot-Blast Stove

  29. 通过ORIGIN软件分析,在给定处理参数条件下,1.0kV/cm电场强度、50个脉冲数目的处理条件导致热风干燥过程中的失水率最大。

    By analyzable of ORIGIN software , the processing parameter which 1.0kV/cm of field strength and 50 pulses resulted in the maximal water loss during air drying .

  30. ECA-175及CA-179浇注料在顶燃球式热风炉上的应用

    The application of pouring material eca-175 and ca-179 to spherical top-fired stove