混料

B，高能球磨混料-真空焙烧-酸洗除杂。

B.high energy ball mill mixing - vacuum , roasting-acid pickling for impurity removal .

混料工艺对Al+Fe2O3铝热剂燃烧特性的影响

Effect of mixing procedure on combustion characteristics of thermite Al + Fe_2O_3

她把混料切好后放进油里炸成一种叫做Quin-Kuria的土豆炸面圈。

She cuts and fries the mixture up into a potato doughnut called Quin-Kuria .

PET生产混料装置PLC控制系统

PLC controlling system for the material-mixing equipment of the PET producing process

PVC混料系统中物料温度的模糊控制

Fuzzy Control for Temperature of Material in PVC Mixer System

硬质PVC干混料注塑成型要点分析

Kernel Analysis of Injection Moulding on Hard PVC Dry Mixing

流变仪对PVC干混料流变性能的评价

Evaluation on the rheological properties of dry mixed PVC by a rheometer

介绍一种集成化、全电脑控制的PVC配料、混料新技术。

A new conception and technology of PVC raw material preparation was introduced .

本文介绍国外一种制备PVC干混料的高效混配工艺。

A Foreign high efficient mixing technology for compounding PVC dry blend is presented .

LOGO！在冰箱自动混料系统中的应用

The Application of LOGO ! in Automatic Blending Control System of Refrigerator Production

混料工艺对Al+Fe2O3铝热剂反应原料性能与微观形态的影响

Effect of mixing process on properties and morphology of precursors in Al + Fe_2O_3 aluminothermic reactions

随着分散剂用量的增加，PVC干混料表观密度增大；熔体流动速率降低；

With the increase of dispersing agent content , apparent density and hardness increased , melting flow index decreased .

试验以N、P、K肥为原料，应用混料试验设计方法进行试验，建立各配方施肥方案与经济收益的数学模型。

In this paper , the fertilizer of N , P and K were selected and used in experiment and practice , according to mixed design method .

研究对比了基体Mg粉的形状和新旧程度、粉末冶金时混料方式和热压工序对镁基复合材料性能的影响。

The effect on properties of such factors as shape and stocking duration of Mg powder ways of mixing powder and hot compaction process were also investigated .

使用自行研制的毛细管动态流变仪，研究振动参数对聚丙烯（PP）与碳酸钙（CaCO3）在不同配比时混料流变行为的影响。

Polypropylene filled with CaCO_3 in various amounts was extruded in self-made dynamic capillary rheometer and the effects of vibration parameters on rheological behaviors were studied .

设计了PLC控制PET生产过程中混料装置的硬件电路和控制系统的梯形图，阐述了程序的启动和运行过程。

Designing the hardware circuit and trapezoid drawing of the material mixing equipment for the PET producing process using PLC controlling system , introducing the starting and operating process .

采用x射线衍射、扫描电镜、成分分析及电容器阳极电性能检测等方法，对比研究高能球磨与玛瑙研磨2种不同混料工艺。

The high energy ball milling procedure and agate grind procedure were compared by means of X-ray diffraction , scanning electron microscopy , component analysis and electrical property test for capacitor anode .

利用MINITAB软件的混料设计功能研究了复配的IFR对阻燃PP体系的阻燃性能和力学性能的影响。

Flame retardancy and mechanical properties of intumescent flame retardant polypropylene ( IFR-PP ) systems were investigated by mixture design in MINI TAB .

探讨了UF-810填充PVC复合体系中在混料、挤出加工过程中应注意控制的工艺要点。

The main technical parameters for PVC compound system filled with UF-810 were researched .

简单介绍了用冲击ACR改性的PVC干混料的流变、挤出和加工热稳定性能。

The rheological property , extrusion property and heat stability in the processing of PVC dry blends modified by impact ACR are introduced briefly .

本文介绍了合金成分、混料方法、烧结温度、保护气氛、冷却速度及真空热处理对WNiCu高比重合金机械性能的影响。

The influence of the composition , mixing method , Sintering temperature , protective atmosphere , cooling speed and vacuum heat treatment on the mechanical properties of W-Ni-Cu heavy alloy is studied .

通过改变球磨工艺参数即采用预球磨，可改善钢结合金混料的均匀性，从而获得组织均匀、性能优异的WC系钢结合金。

By altering ball-milling conditions , uniformity of powder mixture can be improved to obtain steel-bonded WC hard alloy with the uniform microstructure and good performance .

MOX燃料混料过程的优化

Optimisation for the Blending of MOX Fuel

全面考查了各种因素如：混料方式、初始溶液的PH值、络合剂、分散剂、水浴温度、真空干燥等对材料的合成、结构和性能的影响。

A series of materials having the perovskite-like structure were prepared by the sol-gel method with many factors considered , including the blending method , the initial PH of the solution , complexing agent , dispersant and water bath temperature .

对于含过程变量的三分量Becker混料模型（Ⅰ）和（Ⅱ），给出了参数估计的A－最优正交区组设计。

For the 3-component Becker mixture models (ⅰ) and (ⅱ) with process variables , this paper considered the A-optimal orthogonal block designs to parameter estimation .

从PVC树脂的选用、不同助剂的用量和功效及混料与挤出过程各相关参数的设置等方面，探讨了影响PVC芯层发泡管发泡质量的各种因素。

Factors influencing the foaming quality of foamed PVC sandwich pipes were investigated from aspects of the selection of PVC resin , the dosage , effect and blending of different additives , and the setting of each parameter during extrusion .

混料凸多面体顶点的分枝构造法及修正的CONSIM算法

A branch-constructing algorithm for extreme vertices of the mixture convex polyhedron and a modified consim algorithm

大尺寸的SiC颗粒在制备和挤压过程中易发生断裂，断裂的SiC颗粒可以承受压痕载荷，但不能承受拉伸载荷。（4）混料时间增加，SiC颗粒分布均匀度增加。

Large-sized particles crack more easily during extrusion and tensile testing , and the fractured particles cannot withstand tensile load , but can endure indentation load . ( 4 ) The SiC particles distribute more uniformly in the matrix with increasing the mixing time .

采用混料最优设计的方法研究了ZrO2－Al2O3－MgO三元复合材料的配比，及其成型工艺。进行了直孔过滤器过滤钢水效果试验。

The optimizing ingredient of ZrO 2 Al 2O 3 MgO 3 component composites for extruded cellular ceramic filters using optimum design of mixing and the effect of the filters filtrated by molten steel have been studied .

实验结果表明：与使用CPE改性的PVC干混料相比，使用冲击ACR改性的PVC干混料具有塑化时间短、塑化扭矩大、塑化温度高的特点。

The experimental results show that , compared with the PVC dry blends modified by CPE , the PVC blends modified by impact ACR exhibit the characteristics such as shorter plasticizing period , bigger plasticizing torsional moment and higher plasticizing temperature .