涂覆

  • 网络Coating;coat;conformal coating;Parylene Coating
涂覆涂覆
  1. 激光涂覆MS合金层的显微组织与耐磨性

    Study on microstructure and wear-resistance of MS alloy coating produced by laser cladding

  2. 非均匀成核法涂覆改性纳米SiC粉体表面研究

    Surface modification of nano-SiC powder by coating with heterogeneous nucleation process

  3. 2024铝合金涂覆Ni,Fe和Cu激光表面合金化

    Laser Surface Alloying of 2024 Aluminum Alloy with Ni , Fe and Cu

  4. SiC纳米/微米粒子表面修饰、涂覆的研究进展

    Research Progress on SiC Nanometer / Micron Particle Surface Decorating Coating

  5. 微米、纳米SiC表面涂覆、改性的方法及研究现状

    Method and Research Status of Micron and Nanometer SiC Surface Modification and Coating

  6. 用物理溅射法在碳纤维表面涂覆SiC

    Coating silicon carbide on carbon fibres by PVD

  7. Al2O3的涂覆也很好地改善了陶瓷成分SiC的氧化问题。

    The Al2O3 coating also improved the inoxidizability of the SiC ceramic .

  8. Y2O3对激光涂覆生物陶瓷涂层的影响

    Effect of Y_2O_3 on Bioceramic Coating by Laser Cladding

  9. 这是一种高透光的PET膜,涂覆有丙烯酸压敏胶合剂,并且层压一个白色PET离型纸。

    An optically-clear PET film coated with acrylic pressure-sensitive adhesive and laminated with a white PET release liner .

  10. 胶粘层对PU涂覆产品的影响基于有序生物膜的电容型层胶粘蛋白新型免疫传感器

    Influence of Adhesive Layer on Polyurethane Coating Laminated Products

  11. (Sr,Ca)TiO3系复合功能陶瓷的涂覆离子热扩散

    Thermal diffusion of coating ions in ( sr , ca ) tio_3 multi-function ceramics

  12. 基于上述讨论,我们得出结论:可以用于蛋白质和DNA分离的聚合物介质必须同时满足高筛分能力和动态涂覆能力。

    Based on the above discussion , the separation medium for protein and DNA separation should possess both high sieving ability and self-coating ability .

  13. 采用本方法,分别在PE纤维、丝织物、棉织物等多种基材上成功地涂覆不同特征单体的膜层。

    Coating of different monomer film was deposited successfully on PE fibers , silk fabrics , cotton fabrics respectively .

  14. 涂覆雷达吸波材料复杂目标RCS可视化计算

    The Visual RCS Computing of Complex Targets Covered with Radar Absorbing Material

  15. 手征材料涂覆导体目标电磁散射特性的PO分析

    PO Analysis for Electromagnetic Scattering of Conducting Objects Coated with Chiral Material

  16. SPC技术在荧光灯阴极电子粉涂覆工艺中的应用

    The Application of SPC Technology in the Fluorescent Lamp Filament Coating

  17. 各向异性材料涂覆金属二面角反射器的RCS分析

    RCS analysis for anisotropic coating dihedral corner reflectors

  18. 在钛表面涂覆羟基磷灰石(HA)可以显著提高钛的生物活性,实现钛植入体与骨组织的骨键合。

    Hydroxyapatite ( HA ) coating on the titanium surface can be significantly improve the biological properties of titanium .

  19. 采用ICPAES法测定冷轧钢板表面涂覆的硅量。

    An ICP-AES method for determination of surface silicon on cold-rolled steel plates was introduced .

  20. 化学镀镍磷合金表面涂覆SiO2溶胶-凝胶封孔技术研究

    Research on Pore Sealing of Electroless Ni-P Plating Alloy Covered with SiO_2 Sol-Gel

  21. 介绍了PU涂层产品加工中,胶粘层对涂覆产品的外观和内在性能的影响。

    The effects of adhesive layer on the appearance , performance of polyurethane coating products are reviewed .

  22. 研究了涂覆Al2O3的Ti纤维增强γ-TiAl基复合材料,分析了界面结构和力学性能特征。

    TiAl intermetallic matrix composites reinforced by Ti-fiber coated with Al2O3 are presented and interface structure and mechanical behavior are analysed briefly .

  23. 均相沉淀法涂覆ZnO工艺对微孔Al2O3分离膜改性作用的研究〔I〕&反应温度与涂覆次数的影响

    Study on the modification effect of homogeneous precipitation method by ZnO dipping on the al_2o_3 microfiltration membrane influence of reaction temperature and dipping times

  24. 本文研究了用溶胶-凝胶法对碳化硅进行涂覆的方法,并用X射线衍射仪分析了溶胶-凝胶法制备的莫来石涂层的相组成。

    Formation of mullite on SiC substrate via Sol Gel method is investigated in this paper . The phase of the coating is studied by X ray analysis .

  25. LQ型填充剂在PVC圆网涂覆制品中的应用

    LQ-Type Filler of PVC

  26. 金属目标表面涂覆吸波材料可以有效地抑制雷达散射截面(RCS)。

    Radar Cross Section ( RCS ) is efficiently controlled by coating material ( RAM ) for metal objects .

  27. 本文以溶胶凝胶+粉末法制得纳米TiO2薄膜光电极,它解决了溶胶-凝胶法存在成本高、制作时间长的问题以及粉末涂覆法粒径较大,不易分散的问题。

    This paper prepared the nano - TiO_2 thin film photo-electrode by the method of sol-gel plus powder .

  28. 本文研制了一种无需复杂前处理即可直接涂覆的PP塑料专用涂料。

    This paper gives a study on the special coatings that can be coated directly on the surface of the PP plastic without complex pretreatment .

  29. 对聚丙烯(PP)涂覆料生产过程中由于原料变化导致的质量问题进行了分析,指出由于原料去活不彻底从而造成PP涂覆料生产过程中产生质量问题。

    This paper analyzed the quality problem of coating grade polypropylene ( PP ), which arose from the variation in raw materials during the production process .

  30. 钛合金表面改性采用表面涂覆烧结法原位合成K2TinO(2n+1)涂层,涂层的结合强度由涂层合成反应和物理嵌合力而得到保证。

    Potassium titanate coating was in situ synthesized on the surface of titanium for modification , and It 's intensity was guaranteed with coating synthesized reaction and physical table force .