涂层硬质合金

  • 网络Coated Carbides;CVD;PVD;SOLID CARBIDE
涂层硬质合金涂层硬质合金
  1. TiN涂层硬质合金刀具切削奥氏体高锰钢的磨损破损研究

    Wear and Fracture Study of TiN Coated Carbide Tool for Austenitic Manganese Steel Cutting

  2. CVD涂层硬质合金刀具的耐磨性和破损特性

    Characteristics of wear resistance and fracture of CVD coated carbide tools

  3. TiN基复合涂层硬质合金刀具的力学性能与切削性能研究

    Investigate of mechanics and Cutting performance of Cemented Carbide Cutting Tools with TiN based Composite Coatings

  4. 高精切削用CVD涂层硬质合金刀具的质量控制

    Quality Control of CVD Coating Carbide Tool in High-accuracy Cutting

  5. CVD金刚石涂层硬质合金工具表面预处理新技术

    A Pretreatment Method for Adhesion Enhancement of CVD Diamond Coatings on Cemented Carbide Substrates

  6. CVD金刚石涂层硬质合金刀片的基体预处理方法进展

    Progress in pretreatment techniques of cemented carbide insert coated with chemically vapor deposited diamond film

  7. 金刚石薄膜涂层硬质合金刀具是CVD金刚石薄膜的重要应用领域之一。

    The cemented carbide tool coated with diamond film is one of the important application of CVD diamond film .

  8. 采用新型复合SiC,Si3N4和TiN涂层硬质合金刀具对高锰钢进行了切削加工对比研究。

    The experimental tool materials for the steel cutting included compound SiC , compound Si_ 3N_ 4 and TiN coated carbide .

  9. 结果表明,TiN涂层硬质合金刀具切削奥氏体高锰钢时耐磨性优于单一硬质合金刀具,且适于低速切削(小于30m/min)。

    The results show that the wear resistant of the TiN coated tool is better than that of a single one . The TiN tool is appropriate for low speed cutting ( v < 30m / min ) .

  10. 在车铣加工中心上,分别采用硬质合金和TiN涂层硬质合金刀片,对铝合金和不锈钢工件进行了车铣加工的刀具磨损试验,研究分析了车铣刀具的磨损和破损特征。

    Separately adopted carbide and TiN coated carbide to machine aluminum alloy and stainless steel , a series of turn-milling tool wear experiments had been done on a turn-milling machining center to analyze the tool wear and fracture .

  11. 为了验证仿真准确性,进行了硬度200HB的45钢的无涂层硬质合金刀具切削试验。

    As an application , machining of 45 # steel at 200 HB hardness using uncoated carbide tooling was investigated .

  12. 涂层硬质合金刀片耐磨性能的研究

    A study of the wear resistance of coated carbide inserts

  13. 新型陶瓷涂层硬质合金刀具的涂层机理和切削性能

    Coating mechanism and cutting performance of novel ceramic coated carbide

  14. 陶瓷粉末涂层硬质合金刀具的切削性能

    Cutting Performance of Cemented Carbide Cutters by Hot Pressing of Ceramic-coated Powders

  15. 溶胶-凝胶法制作陶瓷涂层硬质合金刀具

    Ceramic - coated cemented carbide cutting tools by sol-gel route

  16. 涂层硬质合金刀具车削奥氏体不锈钢的试验研究

    Experimental Study on Coated Carbide Tool Turning Austenitic Stainless Steel

  17. 涂层硬质合金刀具加工镍基合金的应用

    Application of Coated Carbide Tool in Nickel-Based Alloys Cutting

  18. 涂层硬质合金基体特性及其对刀具失效机理的影响

    Effect of the substrate properties on the failure mechanism of coated carbide tools

  19. 目前,涂层硬质合金可转位刀片使用越来越广泛,不同的使用领域对涂层合金提出不同的要求。

    The coated cemented carbide indexable inserts are used more and more widely .

  20. 切削纤维板时表面涂层硬质合金刀具的磨损

    Wear characteristics of coated carbide tools in cutting fiberboard

  21. 涂层硬质合金刀具及其在切削加工中的应用

    Coatting hard alloy cutting 's application in the cutting

  22. 基体的梯度结构对涂层硬质合金性能的影响

    Influences of functionally graded structure of substrate on performance of coated cemented carbide

  23. 金刚石涂层硬质合金的研究动态(Ⅱ)

    Research Information on Diamond - coated Hard Metals (ⅱ)

  24. 涂层硬质合金刀具切削条件的优化

    Optimization of cutting conditions of coated carbide tools

  25. 涂层硬质合金刀具的切削机理与性能特点

    Cutting Mechanism and Performance of Coated Carbide Tools

  26. 涂层硬质合金刀具切削韧性研究

    The cutting toughness of coated carbide tools

  27. 不同涂层硬质合金刀具铣削汽轮机叶片用钢的试验研究

    Milling Experiments Using Carbide Tools with Different Coatings on Steam Turbine Blade ′ s Steel

  28. 具有梯度结构的涂层硬质合金刀片

    Coated cemented carbide with gradient structure

  29. 涂层硬质合金具有高硬度和优良的耐磨性,延长了刀具的寿命,这是切削刀具发展的又一次革命。

    Coated cemented carbides can get high hardness and better wear resistance after using coating technique and prolong cutting tool 's life .

  30. 通过涂层硬质合金刀具高速铣削45钢来研究高速铣削已加工表面形貌。

    The studies were made on the surface profiles of high speed milling by high speed milling 45 # by cemented carbide tool .