油浸

  • 网络oil immersion;immersion method;Oil stained
油浸油浸
  1. Air(初三适用)油浸风冷变压器温度场的数值模拟

    Numerical Simulation of Temperature Field in Forced - Air Cooling Oil - Immersed Transformer

  2. 研究证实,石油的氧化物&地沥青及部分油浸砂岩对U、Mo、Se、V、Re等元素具有较强的还原沉淀能力,从而构成了砂岩型铀矿床成矿作用的重要环节。

    It is founded that land bitumen , the oxides of petroleum and oil soaked sandstone are of high reduction and precipitation ability to U , Mo , Se , V and Re , and fairly important to uranium metallogeny .

  3. 油浸法快速校正X射线衍射矿物定量分析

    Using Immersion Method to Rapid Correct Quantitative Analysis of Minerals by XRD

  4. 将油浸法应用到海泡石、刚玉等矿物岩石的X射线衍射矿物定量分析中,使其相互取长补短,相得益彰。

    As the immersion method is used to the quantitative analysis of minerals by XRD , their combination is very well and complementary each other .

  5. 地沥青及油浸砂岩对U、Mo、Se、V、Re等的还原沉淀能力实验研究

    Experimental research on the reduction and precipitation ability of land-bitumen and oil-soaked sandstone to U , Mo , Se , V and Re

  6. 110~220kV油浸式互感器tgδ回升机理

    Mechanism of tg δ Rising Again of 110 ~ 220kV Oil-filled Instrument Transformers

  7. 文章最后探讨了地沥青及油浸砂岩(主要还原剂为CH4)具有还原作用能力的热力学机理。

    The reduction thermodynamics mechanism of the land-bitumen and oil-soaked sandstone ( take CH4 as reductant ) is also discussed .

  8. 文中基于智能互补融合的思想,将粗糙集理论与模糊Petri网络有机结合在一起进行油浸电力变压器故障诊断。

    Based on complementary strategy , rough sets theory ( RST ) and fuzzy Petri nets ( FPN ) are integrated for synthetic fault diagnosis of oil-immersed power transformer .

  9. 35~110KV油浸式电流互感器介损测量时应注意的问题

    Paying Attention to Dielectric Loss Measurement of 35 ~ 110kV Oil-Immersed Current Transformer

  10. 本文主要研究了封隔器胶筒油浸高温(200℃)高压(100MPa)试验系统(BRTTS)测控软件的设计与实现。

    In this thesis , the measurement and control problem of Blocking Rubber Tube Testing System ( BRTTS ) is studied .

  11. QJ2-40型气体继电器主要用于保护各种类型的油浸式全密封变压器的安全运行。

    A gas relay in QJ2-40 is mainly used for protection of safe running of various types of oil-immersed fully sealed transformer .

  12. 油浸式电力设备油中溶解气体分析(DGA)故障诊断技术的研究,对发现变压器内部早期存在的潜伏性故障,提高电力系统的安全稳定运行具有十分重要的意义。

    The study of fault diagnosis technology based on dissolved gas analysis ( DGA ) is very important to maintain the reliable running of electric power system , and also an efficient method to detect the incipient fault in transformer .

  13. 基于底层油温的油浸式变压器热点估计方法研究

    Study on Estimating Method of Hottest Spot Temperature in Oil-immersed Transformers

  14. 水喷雾灭火系统在大型油浸变压器中的应用

    Application of water-mist projector fire-extinguishing system in the large oil-immersed transformers

  15. 油浸式电力变压器的温升试验及计算方法

    Temperature Rise Test of Oil-Immersed Power Transformer and its Calculating Method

  16. 油浸式互感器真空脱氢法的讨论

    Discussion on the Vacuum Hydrogen-doff Method of Oil-immersed Type Instrument Transformer

  17. 油浸式电力变压器绕组与铁心振动特性研究

    Research on Vibration Characteristics of Windings and Core of Oil-Filled Transformer

  18. 油浸电容式套管末屏故障分析及处理

    Analysis and Treatment of End Shield Fault in Oil-Immersed Capacitor Bushing

  19. 基于智能信息融合的油浸式电力变压器故障诊断

    Fault Diagnosis of Oil-immersed Power Transformer Based on Intelligent Information Fusion

  20. 单片机控制油浸式变压器在线温度监测系统

    On-line temperature monitoring system of oil-immersed power transformers based on MCU

  21. 目前,电力变压器主要包括油浸式变压器和干式变压器。

    Currently , power transformers mainly include oil-immersed transformer and dry-type transform .

  22. 油浸电容式套管穿缆引起的变压器过热分析

    Analysis of Transformer Overheat Produced by Draw Lead in Oil-Immersed Capacitor Bushings

  23. 油浸变压器火灾及灭火装置的应用

    Fire Hazard of Oil-Immersed Transformer and Application of Fire-Extinguishing Device

  24. 浅谈油浸自冷变压器冷却系统优化方案

    Discussion on the Cooling System Optimized Scheme for Oil-immersed Natural Cooling Transformer

  25. 防止油浸式电力变压器渗漏油的技术措施

    Technical Measures for Protecting Oil-Immersed Power Transformer from Oil Leakage

  26. 油浸多片盘式制动器石油化工塔盘设计规范

    Oil-immersed multiplate disk brake Code for design of tray for petrochemical industry

  27. 三相油浸式非晶合金配电变压器铁心节材设计

    Material-Saving Design for Amorphous Core in Three-Phase Oil-Immersed Distribution Transformer

  28. 传动带:传动带如有裂缝、伤口或油浸应更换。

    DRIVE BELTS : Replace any nicked , cut or oil-soaked belts .

  29. 油浸式变压器渗漏油原因及预防措施

    Reasons and preventing measures for oil leakage of oil-immersed transformer

  30. 油浸式变压器潜伏性渗漏油的产生及防止

    Generation and Prevention of Latent Oil Leak in Oil-Immersed Transformer