汽车生产线

基于PLC的汽车生产线管理系统

The Management System Based on PLC for Automobile Production Line

基于RFID的混流装配汽车生产线物料动态配送研究

Research on RFID-based dynamic parts supply strategy for the mixed model automobile assembly lines

通过对这一管理系统的硬件结构、控制方式、应用软件的介绍，给出基于PLC进行汽车生产线管理的基本模式。

A basis model for managing automobile production line based on PLC is proposed with the introduction of hardware configuration , controlling pattern and application software .

某汽车生产线中电小车的PLC与主控中心PLC的通信介质为滑触线.介绍一种采用单片机通信的通信系统，并分析了通信电路的硬件组成和软件结构。

In an auto production line , the communication medium between PLC in the trolley and that in the control center is wire touched by slip . The paper introduced a communication system which used singlechip circuits , and analyzed its circuit and framework of its programming .

柔性化汽车生产线的质量控制及追溯系统

The quality control and ascend system in flexible auto production line

汽车生产线涂装车间自动化控制研究与实现

Auto Production Line 's Painting Room of Automation Research and Realization

滑橇式自动输送系统在汽车生产线中的设计与应用

Study and Design of Dongfeng Automobile production line Automation System

随之而来，汽车生产线的技术改造项目越发的频繁。

Attendant , vehicle production line technological modification projects more and more frequent .

自动液压仿形背刀车床熟悉汽车生产线气动、液压系统。

Be familiar with gas and hydraulic pressure system about auto product line .

汽车生产线中单片机通信的应用

The Application of Singlechip Communication in Auto Production Line

汽车生产线的网络通讯控制系统

Network communication control system in automobiles product line

长城汽车生产线的工人想要证明他们能够生产出性价比高的汽车。

The workers at the Greatwall car plant want to prove they can produce quality at low cost .

工业工程在汽车生产线物料上线运送方式优化中的应用研究

A Study on the Application of Industrial Engineering to the Optimization of Material Moving and Loading for Automotive Productions

这个汽车生产线由中国最大的汽车公司--长城汽车公司与保加利亚利特克斯公司合作建设。

The plant is a joint-venture between Greatwall Motors , one of the China 's largest auto-makers and Turks , Bulgarian industry company .

例如，韩国改变了最初在国内运营一整条汽车生产线的模式，转而建设国际化的汽车供应链。

South Korea , for example , shifted from its original model of operating an entire car industry at home to setting up an international automotive supply chain .

柔性激光视觉检测站集合了机器人快速灵活可编程和传感器测量快速非接触的特点，完全满足汽车生产线柔性化的需求。

The flexible laser visual inspection station combines the characters of the robot ( fast , flexible and programmable ) and those of the sensor ( fast and non-contact ) .

PLC+工业现场总线的控制系统大大提高了汽车生产线的自动化程度，减轻了工人的劳动强度，提高了生产效率，对现代工业起着越来越重要的作用。

PLC and on-site General-line Control system greatly enhance the automatic level of car producing line , reduce working intensity and then increase productivity . This plays a more and more important role in modern industry .

研究了汽车焊装生产线重构规划（Planning）技术。

The planning technique for automobile welding line reconfiguration was studied .

本文介绍了&种汽车焊装生产线CAD系统。

A CAD system for car body welding producing line is presented .

汽车焊装生产线三维CAD系统研究

A Study on CAD / CAM System of Car Body Welding Production Line

因此，将RMS这一制造哲理用于指导汽车焊装生产线的设计和制造工作，对增强汽车制造企业竞争力有重要意义。

So , using RMS in welding line design is of importance for strengthen enterprise competition .

通过对汽车焊装生产线的各主要组成部分的剖析，分析了控制的内容及要求。针对其工艺特点，给出了PLC控制系统的架构，完成硬件设计与软件设计方案。

Through analyzing the characteristics of process , the content and requirements of control , the control system architecture based on PLC was set up , and the design of hardware and software was accomplished .

以汽车底漆生产线控制系统为例，介绍了可编程序控制器（PLC）和组态软件相结合的故障诊断系统，并着重阐述了PLC控制系统故障诊断技术的几种方法。

Taking the control system of the bodywork primer line as an example , a fault diagnosis system based on PLC and configuration software was introduced , and several fault diagnosis methods of PLC control system were discussed .

提出了一种新颖的基于UG的汽车焊装生产线企业标准件数据库系统，实现了企业标准件数据库系统中的数据库和图形库同步管理。

Then a novel enterprise standard part database of automobile welding line on UG is put forward , in which the isochronous management of enterprise standard part database and part graphics library is realized .

大规模定制汽车总装生产线规划及其仿真环境

Planning Strategy and Simulation Environment of Automotive Assembly Lines for Mass Customization

国内汽车焊装生产线的两点问题

Two Problems of Welding Assembly Line of Automobile in China

多机器人汽车焊接生产线离线编程系统设计

Design of Off-line Programming System for Automobile Welding Product Line Including Multi-robots

中国汽车涂装生产线新技术的应用及发展

Application and Development of New Technologies of Automobile Coating Lines in China

焊装主线是汽车焊装生产线的核心部分。

Main Line is the heart part of car body welding production line .

汽车装配生产线手工搬运作业的工效学分析

The Application of Ergonomics-based Manual Material Handling Evaluation in SGM Vehicle Assembly Line