气流粉碎机

气流粉碎机的现状及技术进展

Present Situation & Technological Development of Jet Mill

超音速气流粉碎机生产超细粉体的安全问题探讨

Discussion of Safety Problems of Superfine Powder Produced by Supersonic Jet Mill

QON型循环管式气流粉碎机

Model QON Recycle Tube Type Pneumatic Pulverizer

利用超微气流粉碎机制得了平均粒径为1～5μm的微米级粉煤灰，将其作为掺合料配制出具有较高流动性（坍落度20cm左右）的超高强混凝土；

Using fluid energy mill , fly ash was ground to micrometre grade with average diametre 1 5 μ m. Super high strength and better fluidity concrete is designed and fabricated .

扁平式气流粉碎机粉碎室流场的数值模拟

Numerical simulation of grinding chamber in a pancake superfine jet mill

煤超微粉碎双圆盘气流粉碎机的分级系统设计

Grading System Design of Double Discs Airflow Crusher for Coal Superfine Grinding

超音速气流粉碎机喷嘴计算机辅助设计

Computer aided design of supersonic jet nozzle for jet mill

提高圆盘式气流粉碎机能量利用率的途径

An approach to increase the availability of energy for disk air-jet mill

影响对撞式气流粉碎机效率的因素

The factors effecting the efficiency of a counter - impact flow pulverizer

气流粉碎机高分子材料内衬制作工艺探讨

Discussion on Making Technology of Lining Inside Jet Comminutors with Polymer Materials

运用气流粉碎机超微粉碎葡萄籽的工艺研究

Study on the Ultrafine Pulverizing Technology of Grape Seeds by Airflow Pulverizer System

超音速气流粉碎机喷嘴的结构设计研究

Study on Structure Design of Supersonic Flow Pulverizer Nozzles

气流粉碎机原理、特点及工业应用

Principle , characteristics and industrial use of jet mills

超音速气流粉碎机等流能喷嘴计算

An Analytical Approach to the Constant Fluid Energy Nozzle on Supersonic Jet Mill

气流粉碎机的机理及发展趋势

The principle and development tendency of airflow mills

气流粉碎机粉碎室速度场研究

Study of Velocity Field in Jet Mill 4 . collective chamber ; Crashing Costs

方法：用撞式气流粉碎机对蒲公英进行细胞级超微粉碎；

Method : Herba Taraxacum mongolici was porphyrized into cell_level ultramicro_prower with knock on pneumatic bucher .

圆盘式气流粉碎机在超细粉碎作业中最大的问题是能量利用率低。

The supreme problem of disk air-jet mill in ultrafine pulverization operation is lower utilization of energy .

在气流粉碎机中对重质碳酸钙进行干法超细与改性一体化工艺研究。

Studying of the ultrafine and modification technology of heavy calcite by dry way achieves good result .

对撞式流化床超细气流粉碎机内腔流场数值模拟与测量

Numerical Simulation and Measurement of Flow Field in the Chamber of a Fluidized Bed Opposed Superfine Jet Mill

用于气流粉碎机的超音速喷管设计研究

On Designing Supersonic Nozzle Capable of Pulverizing Chemical Material into High-Purity Micrometer Particles When Used in Stream Muller

超音速气流粉碎机核心喷射带流动规律与几何结构探讨

The flowing law and geometrical structure of a key injection belt in a supersonic air flow pulverizer & discussion

试验了三种制备墨粉的方法，即球磨机球磨破碎法、喷雾干燥法和气流粉碎机粉碎法；

Three methods are adopted to prepare the toner including ball milling , spray drying and pneumatic jet milling .

并对以热压缩空气为工作介质的气流粉碎机加料器喷嘴的设计方法作了较为详细的研究。

The method of designing hot compressed air feeder injector applied to the jet grinding mill was studied too in the paper .

本文将气波制冷技术与涡旋式气流粉碎机结合，成功地实现了胎面胶粒和其它物料的低温粉碎。

By means of wave machine and vortex mill , it is a successful to grind tired tyre and other materials under the cryogenic environment .

而另一种方法就是用气流粉碎机，舒尔勒称这种粉碎机能把化妆品磨成更细小的颗粒，做成更加光滑，更加平整的成品。

Another method uses a jet mill , which Schueller says breaks the makeup into finer particles , creating a smoother , more even finish .

介绍了圆盘式、循环管式、靶式气流粉碎机的原理、特点及工艺参数，并列举了各种的物料微粉碎实例。

Horizontal dist , circulation tube and target-type jet mills are described in principle , characteristics and technological parameters and ultrafine grinding examples of various materials cited .

在研究煤超微粉碎过程中，设计了一种用于煤超微粉碎的双圆盘气流粉碎机，与传统的气流粉碎机相比生产效率更高。

Double disc airflow jet mill were widely applied to coal altra-grinding during study on coal altra-grinding , whose production efficiency was higher compared to traditional air mill .

通过分析对撞式流化床气流粉碎机的喷嘴结构、分级叶轮型式、加料口位置及底部结构等，阐述了该型气流粉碎机的结构型式及特点。

The paper presents the internal structures and performance features of the fluidized bed opposed jet mill based on the jet nozzles structure , impeller types , feeding inlet and bottom structure .

长有羽状叶子和小的不显眼的白花和小的扁平豆的小直立的或攀缘的草本属；小扁豆。扁平式气流粉碎机粉碎室流场的数值模拟

Genus of small erect or climbing herbs with pinnate leaves and small inconspicuous white flowers and small flattened pods : lentils . NUMERICAL SIMULATION OF GRINDING CHAMBER IN A PANCAKE SUPERFINE JET MILL