柱面镜

  • 网络cylindrical mirror;cylindrical lens;Lenticular Lens
柱面镜柱面镜
  1. 光路主要由特制光栅、柱面镜以及CCD探测器构成。

    The optical system is mainly made up of special grating , cylindrical lens and CCD detector .

  2. CCD检测激光束折散宽度及在柱面镜曲率半径测量中的应用

    Measurement of divergent angle width of laser beam with CCD for determination of radius of curvature of cylindrical lens

  3. 实验采用烟雾作为示踪粒子,由He-Ne气体激光器产生的激光束经柱面镜后形成片光源实现对流场的照明。

    A He Ne gas laser was used for the flow visualization with a half cylinder lens used to form a luminous sheet .

  4. 其中,前置柱面镜的反射率与镀膜材料、掠入射角和X射线波长有关,随X射线波长增大而增大,波长越短,反射率下降得越快。

    The reflectivity of cylindrical mirror is relative with the coated material , grazing incidence angle , and x-ray wavelength , it will increase when the x-ray wavelength increases , and it decrease faster if the wavelength is shorter .

  5. 运用光学CAD设计软件分析并设计了消除像散光学元件(柱面镜)与双光束分离系统;运用照明模拟软件分析了双光束光谱仪系统的可行性和准确性。

    The optical design software is used to analyze and design astigmatism eliminating components ( cylindrical lens ) and dual-beam separation system . The lighting analysis software is used to analyzing the feasibility and accuracy of the dual-beam spectrometer system .

  6. 利用柱面镜的成像特性将传统OCT的点聚焦成像模式改变为线聚焦成像模式,从而降低二维OCT图像的扫描维数,达到提高成像速度的目的。

    High imaging speed is obtained by decreasing the dimensions of 2-D OCT image , which are generated by converting the point focus mode of traditional OCT into line focus mode with a cylindrical lens .

  7. 我们将LOD模型简化技术运用于各类曲面镜成像的过程中(包括柱面镜,球面镜等),根据模型与镜距、视距之间的关系约定调用对应的简化模型参与镜面反射成像。

    We apply LOD technology to the process of Curved Mirror Image ( containing cylindrical mirror , spherical mirror and so on ), and call the corresponding simplified model to participate in the Cylindrical Mirror Image according to the conventional relations between the view point and cylindrical mirror .

  8. TCECS传递效率的高低将影响摄谱效果,而TCECS的传递效率取决于柱面镜的反射率、晶体的积分衍射率、滤光膜的透射率和光谱相对孔径。

    Spectrographic effects will be affected by the transmission efficiency of TCECS , which depends on the reflective ratio of a cylindrical mirror , the integrated diffraction of a crystal , the transmissivity of filter foil , and the spectrographic aperture ratio .

  9. 用柱面镜阵列作二维透射物彩虹全息

    Recording rainbow hologram of 2-D transparent object with cylindrical lens array

  10. 柱面镜对光栅自成像的旋转

    Rotating effect of self - imaging of gratings with cylindrical lens

  11. 柱面镜装校技术与绝对检验研究

    The Technic of the Computer-aided Alignment and Absolute Test in Cylinder

  12. 用于半导体激光器的等共轭距双曲柱面镜系统

    Hyperbolic cylinder lenses of equal conjugate for semiconductor laser

  13. 合成孔径雷达柱面镜的研制

    Development of Cylindrical Lenses for the Synthetic-Aperture Radar

  14. 关于柱面镜成像的讨论

    Discussion on imagery of cylindrical mirror

  15. 抛物柱面镜扫描系统设计

    Design of Parabolic Mirror Scanning System

  16. 柱面镜-光栅谐振腔模式与频率选择特性

    Transverse Modes and Frequency Selective Loss Function of a Resonator Composed of a Cylindrical Mirror and a Diffraction Grating

  17. 并绘出了腔内插入柱面镜,以压缩输出激光发散角的初步结果。

    The compression of output divergence angle by placing suitable cylindrical lens into the resonator is also reported in this paper .

  18. 研究了采用扭转三柱面镜光学系统将厄米-高斯光束变换成为具有轨道角动量的拉盖尔-高斯扭转对称光束。

    The twisted Laguerre-Gaussian beam was generated by transforming of Hermite-Gaussian beams through an optical system consisting of three rotated cylindrical lenses .

  19. 以一个交叉柱面镜腔的计算例揭示出这类光腔的某些重要特征。

    Furthermore , some important characteristics of those resonators are illustrated with a numerical example of the resonator bounded by two twisted cylindrical mirrors .

  20. 该系统的核心是用两组互相垂直、且共轭距相等的双曲柱面镜,把激光器的条形窗口的像变粗变短;

    The key of the system is that cylindrical lenses by perpendicular double group and equal conjugate are used to image marking shape window to thick and short one .

  21. 准直比为450:1的原子束装置,炉温600℃时发生的原子束的数密度为10~9个原子/厘米~3,可调谐连续染料激光经柱面镜系统扩束后与原子束正交。

    An atomic beam apparatus with a collimating ratio of 450 / 1 generates a Li atomic beam of 109 atoms / cm3 at the oven temperature of 600C .

  22. 该方法的基本原理是利用准直激光束通过柱面镜产生扇形折射光束,折射光束散开的宽度同柱面镜曲率半径直接相关。

    While a laser beam goes through a cylindrical lens , the divergent angle width can be precisely determined with a high resolution CCD and a data microcomputer processing system .

  23. 我们利用费马原理中其光程取极小值的结论,解析并计算出柱面镜的反射点坐标,同时提出了一种新的柱面镜镜像点定位方法。

    According to the conclusion in Fermat Principle that the optical path takes minimum value , we figure out the formula of reflection point coordinates after carefully analyzing to the Cylindrical Mirror Image .

  24. 本文设计了一套蓝光光学读取头的光路系统,包括用于光束处理的准直镜,整形棱镜,还有用于信号探测的柱面镜。

    This paper designs an optical system and some lenses for the BD OPU , including collimator lens , beam shaping lens for laser beam shaping , and cylinder lens for signal detecting .

  25. 本文运用傅里叶频谱分析方法,研究了柱面镜对光栅自成象的调制作用,发现光栅的自成象不仅周期和位置发生变化,而且生了方向的旋转。

    The modulating effect of a cylindrical lens on the self - imaging of a grating is investigated with Fourier spectrum analysis . It is found that periods and the position of the self-imaging of a grating are changed and the direction is rotated .

  26. 该模式变换器由螺旋切口的Vlasov辐射器,准抛物柱面反射镜和两极相位修正镜面系统组成。

    The mode converter of radiation from the helical incision Vlasov launcher , quasi-parabolic mirror and polarization phase correction mirror system .

  27. 用矩形板和梯形板压制了椭圆柱面形镜与进行了摩擦力修正的压弯公式计算值相符合;

    The rectangular and ladder - shaped mirrors were elliptically bent .

  28. 端泵浦腔及带柱面反射镜腔的矩阵分析法

    Matrix Analysis of End-Pumped Cavities and Cavities with Tilted Cylindric Reflecting Mirrors

  29. 变宽度压弯椭圆柱面聚焦镜的光学参数可调性

    Tunability of optical parameters of width-variable bent elliptical microfocus mirror

  30. 超光滑硅柱面反射镜的加工和检测

    Fabrication and testing of the super-smooth silicon cylindrical mirror