故障隔离

系统级BIT的故障隔离策略

The Fault Isolation Strategy for System-Level BIT

为解决故障隔离与系统重构（FIR）问题提出了改进的联邦滤波算法。

An improved federated filtering method is presented for fault isolation and recovery ( FIR ) .

通过CSTR平台上的仿真，验证了本章结论的正确性。（3）提出了两种图形化的线性静态系统故障隔离方法。

Simulations on CSTR prove these conclusions right . ( 3 ) Two graphical approaches to fault isolation in linear systems are developed .

nPartition基于硬分区，硬分区是HP在2000年首次引入的特性，它提供比软分区更强的故障隔离。

NPartitions are based on hard partitions , which were first introduced by HP in2000 and offer greater fault isolation than soft partitions .

自动故障隔离测试仪AFIT性能分析

Performance Analysis of Automatic Failure Isolating Tester AFIT

模型实现了ATE测试过程中开关资源测试路径冲突判断、最佳测试路径自动搜索、测试路径故障隔离、测试程序与具体测试路径硬件资源无关。

The automated searching of optimum testing path and judging of testing path conflict are realized , the fault of testing path can be isolated well and TP are not related to the material path hardware by the model means .

系统解决了总线频率的自适应调整、故障隔离等关键技术。这一技术可以增加3dB带宽。

In designing process , the key technique that includes frequency self-adapting and failure isolation were worked-out .

论述了工程机械专用运动控制器研制的软硬件关键技术，包括嵌入式软硬件平台的构建，PWM的驱动、保护与电流反馈，电源技术，故障隔离诊断与保护容错等；

The key technologies on developing the hardware and software of specific motion controller for construction machinery were described , including architecture of embedded hardware and software platform , drive of PWM and current feedback , power supply technology , fault diagnosis and tolerance , etc.

PowerVM扩展性更好，具有动态的逻辑分区、安全性/故障隔离，支持专用I/O动态处理器共享，以及活动分区移动性。

PowerVM scales better , has dynamic logical partitioning , security / fault isolation , support for dedicated I / O dynamic processor sharing , and live partition mobility .

将约束满足问题（CSP）模型应用到故障隔离后分布式电源的孤岛划分中，实现了在线识别孤岛，并实现有效的孤岛划分，该方法收敛迅速并且孤岛划分结果能够服务于之后的供电恢复过程。

Constraint satisfaction problem ( CSP ) model is applied in the DG islanding after fault . The on-line island recognition and division are realized . The islanding algorithm based on CSP converges rapidly and the result could make the global restoration more convenient .

大型复杂系统的故障隔离是系统维修的重要环节，现有的故障隔离算法存在平均故障隔离时间（MFIT）长，不能快速自动生成决策树等缺点。

Long mean fault isolation time ( MFIT ) and being incapable of quickly automatic building of FI decision-making tree are the disadvantages of existing methods .

首先介绍LMP在智能光网络控制平面中的地位，接着分析LMP的关键技术，包括控制通道管理、链路所有权关联、链路连接性验证和故障隔离/定位。

This article first introduces the status of LMP in intelligent optical network control plane . Then it analyzes the key technologies of LMP including control channel management , link property correlation , link connectivity verification , and fault isolation / localization .

开发了一种专家系统，用来管理EICAS故障隔离与维护知识。

This paper is devoted to develop an expert system to manage the fault isolation and maintenance knowledge of the engine indication and crew alerting system ( EICAS ) .

本文以VDNAP为基础实现了配网潮流及短路电流计算、配网故障隔离模拟及配网重构。

This article realizes the short circuit current calculation , power flow calculation , fault isolation 's simulation and reconfiguration of the distribution network based on the VDNAP .

城市配网结构优化及故障隔离研究

Study on Configuration Optimization and Fault Isolation for Urban Distribution Networks

多模型粒子滤波的方法可以对非线性系统进行快速、准确的故障隔离。

The method of multiple-models particle filter can isolate the fault correctly .

传感器故障隔离中的最优一致向量选取及应用

Selection and application of optimal parity vectors in the sensor fault isolation

非线性系统执行器故障隔离的参数区间法探讨

Actuator fault identification for nonlinear dynamic systems using parameter interval based method

劈相机故障隔离开关高压截止器开关出故障。

Fault isolating switch for Arno converter Faulty high pressure cut-off switch .

一种红外地球敏感器和陀螺的故障隔离方法

A Fault Isolation Method for Infrared Earth Sensors and Gyroscopes

基于改进灰色关联算法的飞机故障隔离方法优化分析

Optimizing Aircraft Fault Isolation Methods Based on an Improved Grey Relation Algorithm

基于鲁棒自适应观测器的飞控系统传感器故障隔离与重构

Robust Adaptive Observers-Based Sensor Fault Isolation and Reconfiguration in Flight Control System

配电网架空线路故障隔离装置的研制

Research and development of fault in distribute transmit line

根据这一方法已研制成功一个实用测试系统，它能把80%故障隔离到节点。

It can isolate 80 % faults to nodes .

介绍了一种实用的故障隔离方法及其实现。

A fault isolation approach and its application are presented in this paper .

CFM56-3发动机控制系统故障隔离方法

The Fault Isolation Methods for the CFM 56 - 3 Engine Control System

飞行控制系统故障隔离与自适应重构技术研究

Fault Isolation and Adaptive Reconfiguration for Flight Control System

网络化的在线诊断、故障隔离、动态重组技术

The Technology of On-line Diagnosis , Fault Isolation and Dynamic Rebuilding for Network

多音电缆故障隔离追踪和支持。

Multi-tone support for cable tracing and fault isolation .

基于改进联邦滤波的故障隔离与系统重构

Fault isolation and recovery based on improved federated filter