排产

  • 网络Scheduling
排产排产
  1. 把遗传算法和约束理论(TOC)相结合来进行Job-shop排产优化。

    GA was combined with TOC ( theories of constraints ) to solve Job-shop scheduling problem .

  2. A-E方法的多目标车间排产方案精选决策

    Multi-objective Shop Scheduling Scheme Well-Chosen Decision Making Based on A-E Method

  3. 流程ERP销售管理系统及其排产计划的研究与应用

    The Research and Application on Sale Information System and Its Production Plan of ERP

  4. 基于MVC的薄板轧制排产系统的设计与实现

    The Design and Implementation of Planning System for Sheet Rolling Based on the MVC

  5. 本文重点阐述了MES的生产计划排产、质量评估的实现方法。

    Realization method for production plan sequence and quality evaluation in MES is described .

  6. 通过主数据管理工具(MasterDataManagement,简称MDM)接收由相关业务系统产生的各类主数据,以进行排产业务操作。

    Through the main Data Management tools ( Master Data Management , abbreviation MDM ) received from relevant business system to produce all kinds of Master Data , for production scheduling operation .

  7. 同时详细地设计出了APS的排产计划流程,对APS、SCM、ERP三者关系进行了比较。

    And the flow of produce scheduling is designed in detail , The relation of APS SCM and ERP is compared .

  8. 生产计划的优化排产是CIMS(现代集成制造系统)的关键组成部分,是流程工业CIMS实施中的重要环节。

    The optimal production planning is the key part in CIMS , it 's very important in the CIMS of process industry .

  9. ETO生产排产订单插入方法与插单选择研究

    Production Order Inserting Method and Order Selection Based on Grey Correlation Analysis

  10. 其主生产计划(MasterProductionSchedule,MPS)模块是ERP的核心部分,主要涉及生产计划的制定和排产,整个生产计划的驱动和库存量的控制,从而保证生产的流畅和优化。

    Master Production Schedule ( MPS ) is the core of ERP . MPS focuses on production plan and schedule , plan drive and storage control so that it can guarantee the fluency and optimization of the production .

  11. 该系统以RFID(RadioFrequencyIdentification)技术作为系统数据的使用支点,以适用为设计目的,对系统的数据采集、数据通信、生产计划排产、相关的系统管理等方面作了比较详细的描述。

    In this system , We use RFID ( Radio Frequency Identification ) technology as tags to acquire system data , mainly aim at practicability and we focus on system 's data collection , data communication , planning and system manage-related .

  12. 论文对基于仿真的制丝线优化排产系统的结构及软件工程的设计方法进行研究,提出基于多Agent仿真设计思想设计计划仿真模块,采用XML进行设计描述,并给出了设计图。

    Research the simulation-based design method for the structure and software engineering of cut tobacco production line optimization scheduling system , raise the simulation models based on the multi-Agent design ideas described by the XML , finally give the design drawing . 3 .

  13. 在案例分析部分以E公司为例,详细阐述其基于建立ERP信息系统的同时论证分析进行业务流程优化的必要性以及方法和步骤,并且选取供应链计划排产业务流程进行持续优化的实例分析。

    In the case of analysis with E company , it describes in detail the information system based on ERP method and steps of the business process optimization , and choosing the supply chain purchasing process analysis examples of continuous optimization .

  14. 本文介绍了专为炼油厂排产优化而设计的快速线性规划软件系统FLP。

    The Fast Linear Programming ( FLP ) software system which is developed to optimize the production planning of a refinery is presented .

  15. 针对柔性流程企业生产计划的特点,设计实现流程ERP的排产计划系统,并提出了一种基于变长编码遗传算法以解决生产计划中的纸卷切割问题。

    Based on the specialty of flexible processing enterprise , we designed and developed production planning system of processing ERR At last , a genetic algorithm based on variable length coding for the Scroll cutting problem in production planning system is proposed .

  16. 本文首先通过概述MES的发展和功能,并在分析模具生产工艺流程的基础上,构建了模具MES系统的功能框架及车间作业计划排产模型;

    In this thesis , firstly , the development and function of MES were summarized , and based on the analysis of mould production flow , MES function frame and Plan scheduling model of workshop task were constructed ;

  17. 基于鞍钢新轧集团股份有限公司冷轧薄板厂MES工程的实际情况,介绍了机组排产作业计划过程中的任务分配方法。

    An task distribution method of unit operation planning is introduced , based on the real situation of cold-rolling mill MES of Angang New Steel Stock Ltd. Load balancing and optimal matching between unit and production task are set as criteria .

  18. 最后应用改进的模拟退火算法对模型进行仿真优化,制定了适用于实际排产过程中的GANTT图,仿真结果说明了调度模型的正确性和改进算法的有效性。

    An improved ( simulated ) annealing ( SA ) algorithm is proposed to verify and optimize the scheduling model , and a GANTT chart is finally ( obtained ) according to the optimization .

  19. 探讨了先进的计划与排产系统(APS)的含义和理论基础,指出了在大锻件企业开发和应用APS的必要性。

    The concept and the theoretical base of the advanced planning and scheduling system ( APS ) have been described in this article , which has indicated the necessity for the development and application of APS in the heavy forging manufacturer .

  20. RPMS模型可以根据企业各装置的加工能力、装置性能及状况、原油价格、产品价格、产品结构等许多因素制定出合理的优化排产计划。

    RPMS model can work out rational optimal production plan according to the production capacity , performance and condition of each plant , price of crude oil and products , products structure , and so on .

  21. GIOPIMS系统即“石化企业生产计划图形建模优化系统”,是一种用于石油化工企业的优化排产软件。

    GIOPIMS is the abbreviation for Graphic I / O Petro-chemical Industry Modeling System , an application used for production planning in Petro-chemical Industry .

  22. 基于遗传算法的造纸企业优化排产方法研究

    Research on Optical Scheduling in Papermaking Process Based on Genetic Algorithm

  23. 考虑货架存放期的经济批量排产问题的改良算法

    Improved Algorithm of Economic Lot Scheduling Problem with Shelf Life Consideration

  24. 基于均衡排产规则的钢管生产计划调度

    Planning and Scheduling the Production of Steel Tubes with Balance-based Rule

  25. 基于遗传算法的多生产线排产优化调度在离散制造过程中的应用

    Multi-line Optimal Scheduling Based on Genetic Algorithm for Discrete Manufacturing Process

  26. 基于遗传算法的造纸排产优化系统设计与实现

    Design and Implement of Optimized Paper Plan System Based on Genetic Algorithm

  27. 基于遗传算法和多智能体的染缸生产排产与动态优化设计

    Vat scheduling and dynamic optimal design based on genetic algorithm and multi-Agent

  28. 线性规划在车间动态排产中的应用与实现

    Application and Realization of Linear Planning in Workshop Dynamic Scheduling

  29. 流程企业智能排产与优化调度技术

    Technology of Intelligent Planning and Optimal Scheduling for Process Enterprises

  30. 滚动式日排产计划的计算机编制

    The Programming of A Rolling Type One Day Production Planning