抗震设计

  • 网络Seismic design;Performance-based Seismic Design;PBSD
抗震设计抗震设计
  1. RC巨型框架结构抗震设计中的能力设计措施

    Capacity Design Measure in Seismic Design of RC Mega-Frame Structures

  2. RC巨型框架结构抗震设计方法研究

    Research on the seismic design of RC mega-frame structures

  3. 用ANSYS作校核计算,能为结构抗震设计提供可靠的依据。

    The credible aseismic gist is provided by ANSYS for checking the results .

  4. 高层均匀偏心RM结构实用抗震设计(二)

    Seismic design of multi-story asymmetric reinforced masonry structures (ⅱ)

  5. 文中指出,现行抗震设计规范(TJ11&78)所建议的结构影响系数C,没有考虑地震烈度的影响,这是有缺点的。

    It is pointed out that the structural effect coefficient C , proposed in the current aseismic design code ( TJ 11-78 ), has the disadvantage of neglecting the effect of seismic intensity .

  6. 参照国内储罐抗震设计规范,针对某大型LNG储罐作地震响应的实例分析。

    This paper makes seismic response analysis for a large LNG storage tank , referring to the domestic storage tank design regulations .

  7. 以钢筋混凝土框架结构的各阶振型作为结构的侧移形状,将结构等效成N个弹性单自由度体系,使用直接基于位移的抗震设计方法对弹性体系进行设计。

    Each order vibration mode of reinforced concrete frame had as lateral shape , the frame transformed N equivalent elastic SDF systems , a direct displacement-based seismic design method considering effect of multi-mode is proposed to elastic systems .

  8. 基于《建筑抗震设计规范》(GB50011-2001),设计了三个X型中心支撑钢框架,采用pushover方法,得出了其结构影响系数。

    Based on Code for Seismic Design of Building ( GB50011 ), the paper designs three concentrically X-braced steel frames and their structural coefficients are obtained by Push-over analysis .

  9. 土壤-结构动力相互作用(SSI)分析及楼层反应谱(FRS)计算是中国先进研究堆(CARR)工程抗震设计的重要环节。

    Analysis of Soil-Structure Interaction ( SSI ) and calculation of Floor Response Spectrum ( FRS ) is substantial for anti-seismic design for China Advanced Research Reactor ( CARR ) project .

  10. 基于国家标准《建筑抗震设计规范》(GB50011-2001)对底部两层框架砌体结构房屋进行抗震设计分析。

    Based on code for seismic design of buildings ( GB50011-2001 ), the analysis of anti-seismic design on double-frame of bottom building structure is made .

  11. 本文回顾了结构抗震设计理论的发展过程,介绍了抗震发展的各个阶段:静力理论阶段、反应谱理论阶段、动力理论阶段以及现在广受关注的基于性能的理论阶段(PBSD);

    This paper recalled the development process of structure seismic design theory , introduced the concept and design steps of displacement-based seismic design at first .

  12. 本文第三章采用pushover方法分析了节点域剪切变形及结构二阶效应对钢框架受力变形性能的影响,将pushover方法与反应谱结合后分析其对于钢框架抗震设计的影响。

    In chapter three , shear deformation of joint and second order effect which affect mechanical performance of structure by pushover method are investigated , pushover method is also combined with response spectra to study the influence on seismic resistance design in this chapter .

  13. 随着《建筑抗震设计规范》(GB50011-2001)的颁布与实施,新旧抗震规范的主要差别及新规范对各类结构抗震设计所带来的实际影响倍受关注。

    With the publication and application of new Code for Seismic Design for Buildings ( GB50011-2001 ), the difference and influence between the old and the new Code are more and more attended .

  14. 同时,对我国新的《水工建筑物抗震设计规范》(DL5073-1997)及其应用作了简要介绍。

    Simultaneously , the new 《 Antiseismic Design Norm for Hydraulic Structure 》 in China ( DL5073-1997 ) and its application are briefly introduced .

  15. 关于锅炉构架设计与GB50009-2001《建筑结构荷载规范》[1]和GB50011-2001《建筑抗震设计规范》[2]在效应组合方面的协调问题,其间向国内7位知名专家进行了咨询。

    Presents the coordination issues on effect Combination between boiler structural design and " Load Code for the Design of Building Structures "( GB50009-2001 ) & " Code for Seismic Design of Buildings "( GB50011-2001 ) .

  16. 在《建筑抗震设计规范》(GB50011-2001)关于隔震结构的简化计算方法中,水平向减震系数的表达式和定义有些不符,假定的隔震结构地震作用分布规律也与实际情况略有出入。

    In the " Code for seismic design of buildings ", the expression of the damping coefficient in horizontal direction is not agreeable to its definition and the specified distributive form of seismic action of base isolation buildings is incongruent with the practical situation .

  17. 工程系统的内涵、抗震设计与设防原则

    Engineering systems : its connotation , Seismic design and Prevention principle

  18. 本文详细讨论了大坝的抗震设计。

    Details about the seismic design of the dam are discussed .

  19. 核电厂抗震设计的地震动参数

    Seismic ground motion parameters for seismic design of nuclear power piant

  20. 建筑非结构震害和抗震设计

    Architectural non - structure seismic harm and anti - seismic design

  21. 桥梁抗震设计强度法、位移法的探讨

    On Strength Method and Displacement Method of Aseismic Design for Brdges

  22. 场地&结构体系基于性能抗震设计分析方法研究

    Studies on Analysis Method of Performance-Based Seismic Design of Site-Structure System

  23. 对称结构不对称安装粘滞消能器时的抗震设计方法

    Seismic Design Method of the Symmetric Structures with Asymmetrical Viscous Dampers

  24. 超高层建筑结构的减震控制技术与抗震设计要点

    Damping control technology and anti-seismic design method of super-high building structure

  25. 底框&砖混结构抗震设计中几个问题的探讨

    The underframe-brick mixes in the structure earthquake resistance design several questions discussion

  26. 变截面框架结构的抗震设计计算

    Calculation of Earthquake Resistance Design For Variable Section Frame structure

  27. 公路桥梁抗震设计的设防标准研究

    Study of Protection Criteria for Seismic Design of Highway Bridges

  28. 小浪底水利枢纽进水塔群抗震设计

    Seismic Design of the Intake Towers of the Xiaolangdi Multipurpose Dam Project

  29. 现行规范抗震设计方法安全度的评价及工程参数的确定

    Aseismic safety evaluation of buildings designed . in accordance with current code

  30. 对框架填充墙结构抗震设计的思考

    Some Aspects of Seismic Design Method of Infilled Wall-frame Structures