惩罚函数法

采用约束优化方法&内点惩罚函数法，基于Matlab平台，对螺纹螺距进行了优化设计。

The optimal design of thread pitch is discussed based on subjected optimal method & internal penalty function method and Matlab platform .

基于PVM分布式编程环境，将传统的惩罚函数法加以改进，提出惩罚函数并行算法的概念。

The conventional penalty function method is improved , and the concept of parallel arithmetic for the penalty function method is proposed .

非线性规划惩罚函数法BASIC程序

BASIC Program of SUMT for Solving Nonlinear Programming Problems

本文采用优化设计方法对V带进行设计，并用内点惩罚函数法建立寻优数学模型，找出设计变量、目标函数和约束条件，通过迭代得到最优解。

First , the optimal mathematical model is derived through internal penalty functions method , then we can find the design variable , target function and constraint , and get the best solution through iterative methods .

本文从古典的Lagrange函数的乘子法入手，通过对惩罚函数法的分析，指出了增广的Lagrange函数在解决带约束非线性规划问题中的重要作用。

The paper pointe out the important role of extended Lagrange function in solving the constrained non-linear program by means of the method of classical Lagrange multiplier & penalty function .

惩罚函数法（SUMT）在异步电动机优化设计中的应用与研究

The application and study of penalty function method ( sumt ) to optimum design of asynchronous motor

提出了数组链染色体编码方式，以及基于自适应性变异概率和模拟退火惩罚函数法的适应性遗传算法（AGA）。

This paper proposes the array chain chromosome coding and the Adaptive GA ( AGA ) that combines the self-adaptive mutation probability and simulation anneal punishment function .

1变量，并选用惩罚函数法，通过数学软件LINGO编程成功地求解了模型。

The integer variables and 0 ? 1 variables are transformed into some continuous variables , then these NIP problems are solved by using penalty function and mathematical tool-LINGO .

本文系统地比较了多种控制器结构和目标函数，设计出了SUMT惩罚函数法与快速仿真相结合的控制器参数寻优程序。

This paper systematically compares many kinds of structure and object function of numerical controllers , designs the optimal program of numerical controllers which combines SUMT with rapid simulation .

给出MRC液化流程的优化模型，并提出以惩罚函数法作为优化算法，结合各种约束条件，对流程进行了优化计算，效果良好；

At the same times the model of the optimization to the liquefied process are given , the SUMT is used as the optimized method , combined with the constraints , the calculation result is good .

同时，本文采用惩罚函数法将带约束的供水泵站优化模型转化为无约束问题，方便了GPSO算法对模型的求解，保证了求解结果的精度。

In order to facilitate model sloving , this article use penalty function methods to transform the constrained model into an unconstrained problem .

以扭转刚度为目标函数，采用实体各向同性材料惩罚函数法（SIMP）来确定微结构的宏观性能，建立了优化模型。

Using the so-called Solid Isotropic Material with Penalization ( SIMP ) method to evaluate the macroscopic property of the material , the bar-section topology optimization model to maximize the torsional rigidity is formulated .

在用混合惩罚函数法把约束非线性优化问题转变为无约束优化问题后，所采用的算法是BFGS变尺度法，它是公认进行无约束优化最好的方法。

Variable metric method of BFGS is used to solve the problem of unconstrained optimization when a constrained one turns into an unconstrained one by using hybrid SUMT , and it is recognized as the best arithmetic for solving unconstrained optimization problems .

本文将三种惩罚函数法（SUMT）用于异步电动机的优化设计，通过大量的计算试验对它们进行了较详细地研究和比较。

In this paper , three penalty function methods ( SUMT ) have been used in optimum design of asynchronous motor . The detailed study for analysing and comparing with the three methods has been done through a lot of calculation experiment .

结果表明，由于实体各向同性材料惩罚函数法（SIMP）使用了指数惩罚因子，空洞区域的密度与刚度差异远远大于实体区域，导致空洞区域局部模态的产生。

It is found that due to the penalty factor of the SIMP method , the ratio of the density to stiffness is greater in the solid region than in the void region . Such a difference consequently results in the appearance of localized modes in the void region .

惩罚函数法在三维等参杂交元的应用

Application of Penalty Function Method in Isoparametric Hybrid Finite Element Analysis

求解具有简单偿付的二级随机线性规划的惩罚函数法

Penalty function methods for two-period stochastic linear programs with simple recourse

基因遗传算法+惩罚函数法在机械优化设计中的应用

Combination of GA with SUMT Applied to Mechanical optimum Designs

基于惩罚函数法的一级斜齿圆柱齿轮减速器的优化设计

The Optimal Design of Involute Cylindrical Helical Transmission Basis on Multiple-patter Method

内点惩罚函数法在连杆机构设计中的应用

Application of inner point penalty function method for design of link mechanism

惩罚函数法计算燃烧产物的平衡组分

Calculation of equilibrium composition of combustion products by penalty method

利用改进的离散变量惩罚函数法实现机械优化设计

An Improved Discrete Variable Penalty Technique in Mechanical Optimal Design

结合遗传算法，采用惩罚函数法对约束条件进行处理，设计了实数编码的模拟退火惩罚函数法优化程序模块。

Lastly the genetic algorithm charactered with real-coding , anneal-simulation penalty-function is designed .

采用惩罚函数法的立体定向放疗方案的优化

Treating Planning Optimization by Penalty Function for Stereotactic Radiosurgery

应用惩罚函数法求解齿轮减速器的优化设计值

Optimized Design Counts for Gear Reduction Unit by Means of Penalty Function Methods

基于分布式网络并行环境的惩罚函数法

Penalty Function Method Based on Distributed Network Parallel Environment

惩罚函数法在发动机性能计算中的应用

Application of SUMT to Performance Calculation for Turbojet Engines

基于自适应惩罚函数法的混合遗传算法

Hybrid Genetic Algorithm Based on Novel Adaptive Penalty Function

遗传算法与惩罚函数法在辗轧成形工艺参数优化中的应用

Application of Genetic Algorithm and Penalty Function Method in Roll-Forming Process Parameters Optimization

基于混合惩罚函数法的混沌扩频信号最优化相位跟踪

Optimized Phase Tracking Method of Chaotic Spreading Sequences Based on Mixed Penalty Function