形仪

板形仪控制技术在ZR轧机上的应用

The control technology of stressometer measuring roll apply on ZR mill

讨论了最近研制成功的新型大量程长程面形仪（LTP）中精密线性导轨扫描、定向移动以及高精度任意步长等运动的控制；

The control of linear guided stage and image capturing system in the novel Long Trace Profiler ( LTP ) are discussed .

浅谈板形仪的研究动向

Trend of research & development of strip flatness measuring apparatus

上置式齿形仪的微机检测系统

The Measuring Systems with Microprocessor for the Gear-form Indicating Instrument

板形仪张力信号源的计算机模拟系统的研制

Development of Computer Simulating System for Stress Signal Generator in Strip Shape Meter

齿形仪测量值一致性的研究

Research on Sameness of Measured Value of Gear Tester

齿顶圆误差对上置式齿形仪测量精度的影响

The Influence of Tip Circle 's Error on the Measuring Accuracy of Portable Tooth Profile Instrument

应用于四辊可逆式冷轧机的压磁式冷轧带材板形仪

Shape Meter of Pressing Magnetic Type for Cold Rolling Strip to Applicating 4-roller Reversible Rolling Mill

气动板形仪动态标定及系统圆周误差鉴相补偿

Dynamic Calibration of Pneumatic Strip Shape Measuring Rolls and Phase Correction Compensation Method of System Circumferential Error

提高激光板形仪图像检测系统抗背景热噪声干扰的能力

Improve the ability to resist disturbance of thermal noises in the image checking system for laser shape meter

并介绍了合肥国家同步辐射实验室长程面形仪的进展。

Thereafter the progress of the LPT of National Synchrotron Radiation Laboratory ( NSRL ) in Hefei is introduced .

通过对新型板形仪的介绍与分析，探讨了板形仪目前的研究动态和今后的发展趋势。

A novel strip flatness measuring apparatus is introduced and analyzed and the current conditions and trend of development discussed .

本文介绍齿形仪微机检测系统接口装置的组成及工作原理。

The object of this contribution is to introduce the composition and principle of the interface equipment in the measuring systems .

分段辊测张式板形仪是目前应用广泛、测量精度较高的种在线带材平直度检测设备。

Tension-measuring type shapemeter with segmented rolls is a kind of useful and high precise flatness measuring device for on-line rolled strip .

尤其对于板形仪核心关键部件&检测辊的研究，国内始终效仿国外已有产品，设计理念没有重大革新。

The key components of the core shape meter - Measuring Roll research , always following the foreign product , without major innovation in design .

通过对板形仪检测辊检测的张力信号进行研究，实现了信号源计算机模拟系统的硬件系统及软件系统。

The hardware and software system of the stress signal generator are developed after analyzing the regularity of the stress signal from the strip shape measuring roll .

其后采用长程面形仪测试压弯后光栅面形，使用衍射法测试压弯前后光栅线密度，从而得到线密度的变化曲线。

Consequently , the long trace profiler was used to test the curved substrates precisely and the groove density of the gratings were measured by diffractive method .

板形仪是安装在冷轧带材轧机上的检测系统，用于检测带材板形，以控制成品带材的质量，提高经济效益。

The shape meter is a detecting system fixed on the cold rolling strip mill which detects the strip shape to control product quality of strip and improve economic benefit .

通过对分段辊测张式板形仪板形检测原理的分析发现，分段辊区域宽度对板形检测精度影响较大。

Through analysis of shape measuring principle of tension measuring type shapemeter with segmented rolls , it is found that effect of width of segmented roller on shape detection precision is large .

第三，研制变包角模拟标定装置，增强标定功能，实现板形仪的动态精确标定，提高标定精度和检测精度。

Thirdly , develop the device of variable packet angle calibration simulation , enhanced calibration function , to achieve the shape of dynamic precision calibration , to improve the calibration accuracy and precision .

辊式板形检测仪标定装置的试验研究

Experimental study on calibrator of roller & type sheet shape measure instrument

轧钢板形检测仪研究动向

The research tendency of strip flatness measuring apparatus used in steel rolling

万能渐开线齿形测量仪的智能化改造

Intelligent Regeneration of Universal Involute Measuring Apparatus in Gear

一种新型红外遥测板形检测仪

A New Type of Flatness Detecting Instrument by Infra Red Remote Measuring Technique

在“Y”形嗅觉仪中观察家蝇成虫的气味选择行为。

The odor preference of adult M.domestica was measured using a Y-tube olfactometer .

较为详细地叙述了磁弹性板形检测仪的检测原理及其输出信号的处理方法。

The detecting principle of the magnetoelastic plate shape detector and the processing method for its output signals are described in detail .

用Y形嗅觉仪进行的生测表明茶二叉蚜和蚜害茶梢复合体挥发物显著引诱门氏食蚜蝇和大草蛉。

The Y-olfactometer bioassays showed that the volatiles from tea aphids and tea aphid-damaged tea shoots ( PHC ) strongly attracted Sphaerophoria menthastri and Chrysopa septempunctata .

应用自制的管形测量仪，对某钢铁公司穿孔毛管进行了成批测量。

With a gage-measuring meter especially designed by the researchers , measurement of pierced shells by a specific steel mill was conducted on a batch basis .

通过分类号检索，对近年来出现的一些接触式和非接触式板形检测仪的专利情况作了简介。

According to the classifying number some patents concerning the contact and non ￣ contact types of strip flatness measuring apparatus used in steel rolling process in recent years were introduced .

WQ-85微球形聚焦测井仪一致性的研究

Research on the consistency of WQ-85 microspherically focused logging tool