多回路

基于工业以太网多回路PID控制器的研制

Research of Multiloop PID Controller Based Industrial Ethernet

多回路不同采样周期的离散系统的稳定性分析

A stability analysis for discrete-time system with multiloop and different sampling periods

基于RP的早期、多回路反馈模具快速制造系统

Rapid Mold Manufacturing System with Early Stage , Multi-Return Loop Feedback Based on Rapid Prototypes

多回路监控系统是一种实时多任务的应用系统，其开发可以在多任务操作系统WINDOWS下进行，也可以在单任务操作系统DOS下进行。

The multi_circuit monitor and control system is a real_time multi_task application system that can be developed under WINDOWS or DOS .

本文以常规电阻工业加热炉为背景，设计了一个基于DSP的多回路温度控制器。

In this article , taking routine resistance industry heating furnace as the background , we design a multi-route temperature controller based on DSP chips .

控制输入通道中存在干扰问题，介绍了H。混合灵敏度相关理论，为后续多回路安全保护控制器设计提供了理论基础。

Aiming at the disturbances , this paper introduces the theory of the H ∞ mixed sensitivity , preparing for the following design of the multi-loop safety protection controller .

多回路耦合CPL系统的调温特性研究

Research on Temperature Regulation Characteristics of a CPL Coupled with Multiple-loop

本文给出了MHD通道的简化等效电路模型，它和LC合并电路组成一个多回路电网络。

In this paper , a network model consisted of MHD channel equivalent circuit and LC consolidation circuit is presented .

多回路耦合CPL系统瞬态特性的实验研究

Experimental Investigation on Instantaneous Characteristics of a CPL Coupled with Multi Loops

OOS技术在同步发电机多回路分析仿真中的实现

Implementation of OOS technique for multi - loop analysis on synchronous generators

我国大型输油管道加热炉控制系统经历了三代发展过程，从开始的完全人工手动控制到多回路控制器自动控制，再到现在广泛采用的PLC与工控机结合的自动控制。

The heater control system of large-scale pipeline has undergone three-stage changes , that is , from initiatory man-control to auto-control of multi-loop controller , then to auto-control of PLC and industry computer .

介绍一种CPU控制的多回路比值调节系统在固体物料流量调节中的应用及在应用中提高系统稳定性和准确度的经验。

The application of a multi loop ratio control system operated by CPU for solid powder flow control and the experiences for improving stability and accuracy of the system are introduced .

文中提出了面向对象仿真（OOS）技术在多回路分析中实现的方法：首先建立矩阵类，提供简洁的矩阵描述；

This paper presents the design and implementation based on Object Oriented Simulation ( OOS ) for MLA .

阐述了多回路PID调节器的硬件和软件总体设计方案，详细介绍了以DSP为CPU的多回路PID硬件设计和采用图形控制组态设计用户程序的多回路PID的软件设计。

This paper elaborates the whole design of the hardware and software for multi-loop PID , and introduces the design of hardware for multi-loop PID based on DSP , the design of software for multi-loop PID based on picture control configuration .

多回路分析（MLA）方法应用于同步发电机定子绕组内部匝间短路、相间短路以及定子单相接地故障的分析，可以取得比较准确的仿真结果。

It is successful to apply Multi-loop Analysis ( MLA ) to the simulations of synchronous generators on stator internal faults and single-phase grounding faults .

根据交流电机多回路理论，通过把传统的Park变换方法推广到面向转子侧的多相系统，提出了考虑笼型转子实际结构的感应电动机模型，并基于EMTP环境实现了该模型。

Based on the multi-loop theory and the extended Parks transformation method given in this paper , a new induction motor model considering squirrel cage rotor real structure is presented and the model is implemented in electromagnetic transient program ( EMTP ) .

DPC-I型多回路防爆试验测压装置的研制

The Development of DPC-I Multi-circuit Explosion-proof Pressure Tester

首先，利用多回路理论，建立电机在静止a-b-c坐标下的数学模型；

At first , the mathematical model of six-phase salient-pole synchronous machine is developed in stationary a-b-c frame at the base of the multi-loop theory .

基于多回路理论，建立了YN接、Y接、D接笼型异步电动机在正常、内部故障（定子绕组匝间短路与转子断条）情况下的多回路数学模型。

The multi-loop mathematical models of squirrel cage induction motor YN , Y or D connected are deduced and developed successfully under the conditions that the motor is healthy , faulty with inner faults viz .

在用Lagrangian松驰问题获得原问题的可行解时，提出了多回路启发式算法.本文通过对混凝土的松弛问题，用数值方法解积分方程求得中值系数值。

Another new heuristic soothing procedure ( H2 ) constructs feasible solutions of original problem by solutions of the Lagrangian relaxation problem . In this paper , the mean value factor was obtained by using numerical method to solve the integral equation for the relaxation problem of concrete .

介绍在无缝钢管生产中芯棒温度测控系统的组成及MODCELL多回路控制器的基本应用。

The composition of the temperature monitoring system for the core rod in seamless steel tube production and the basic application of MODCELL Multiple-Loop Controller are introduced .

该算法可普遍应用于多回路控制律选参问题的求解，对SR-61悬停模态控制律设计的算例显示了它的直观和有效。

The given algorithm can be used easily to choose coefficients for control law with multi-loop configuration , and a design example with SR-61 hover model shows its convenience and effectiveness .

并构建了多回路误差控制及反馈系统，从而保证系统的精度。

Designed the system for multiple loop error control and feedback .

大型水轮发电机多回路模型的合理简化

Reasonable Simplification of the Multi-loop Model of the Large Hydro Generators

化工过程中的多回路调节及其实现

The Multi loop Feedback Control and Realization in Chemical Industry Process

多回路控制系统的标准系数设计法及其应用研究

Standard coefficient design method for multi-loops control system and its application

多回路网络化控制系统中优化采样频率的确定

Determination of optimal sampling frequencies in multi-loop ( networked ) control system

用多回路方法仿真研究了定子绕组的各种内部故障瞬态。

The transients are simulated using the multi loop method .

醋酸乙烯合成反应器循环油温的多回路控制

Multi-loop Control of Circulation Oil Temperature of Synthetic Reactor of Vinyl Acetate

一种图形化多回路直升机控制律鲁棒选参方法

A Graphic Robust Parameter Selection Method for Rotorcraft Multiloop Control Law Desigen