塑料合金

  • 网络abs;PC ABS;ALLOY;polymer alloy
塑料合金塑料合金
  1. 由聚对苯二甲酸丁二醇酯(PBT),聚碳酸酯(PC)和热塑性弹性体(TPE)组成的三元塑料合金是PBT基塑料合金的新一代。

    This paper describes a new generation of PBT based polymer alloy which is composed of PBT , PC TPE .

  2. 结果表明,在TPU含量为5~20%时,所制TPU/ABS塑料合金具有良好的综合性能,尤其在冲击强度和耐磨性能方面都有明显改进。

    The results showed when the TPU contents was 5 - 20 % , the alloy had good over-all properties , with the impact strength and wear resistance improved obviously .

  3. 本文以PC回收料为主要原料,用少量ABS对其进行改性,制备了PC回收料/ABS塑料合金。

    In this paper recycled PC / ABS plastics alloy were prepared .

  4. PC回收料/ABS塑料合金的研究

    Study on Recycled PC / ABS Plastics Alloy

  5. 阻燃ABS有色工程塑料合金的制备及其性能的研究

    Preparation of flame retardant ABS for special engineering appliances and studies on its properties

  6. 聚碳酸酯(PC)/丙烯腈-丁二烯-苯乙烯(ABS)塑料合金是目前应用很广,很具有商业化价值的合金材料。

    Polycarbonate ( PC ) / Acrylonitrile-Butadiene-Styrene ( ABS ) is a widely used commercial plastic alloy .

  7. PS塑料合金热性能的研究

    Study on thermal properties of polystyrene alloys

  8. 水润滑塑料合金轴承PVT曲线的实验研究

    Experimental Study on PVT Graphs of Water Lubricated Plastic Alloy Bearings

  9. 结果表明,R和PC有部分相容性。它是PC非常有效的增韧剂,同时,可以改善PC的加工流动性,二者共混可望开发出有重要实际意义的塑料合金。

    The results show that the elastomeric MMA copolymer R , which is partially compatible with PC , is a very efficient toughening agent and improves the melting flow rate ( MFR ) for PC.

  10. 从经济角度看,Q价格也较低。因而ABS/PC/Q三元共混物可望开发为具有重要实际意义的塑料合金。

    From an economical consideration , the Q copolymer was cheap , and the ABS / PC / MMA copolymer Q terpolymer would be an important plastics alloy to be developed .

  11. CPL型PC-ABS塑料合金的研制

    The Development of CPL type PC-ABS Polymer Alloys

  12. 产品概述:CQB-F型衬氟磁力泵的过流部件均采用“聚偏二氟塑料合金(PVF2)和超高分子量聚乙烯(UHMWPE)”制造。

    All flow-through parts of CQB-F fluorine lining magnetic pump are made of PVF2 and UHMWPE .

  13. 采用物理共混及化学交联模压发泡工艺生产乙烯-醋酸乙烯酯共聚物(EVA)/三元乙丙橡胶(EPDM)/聚氯乙烯(PVC)三元塑料合金软质泡沫体。

    Ethylene - vinyl acetate ( EVA ) / ethylene propylene diene monomer ( EPDM ) / poly-vinyl chloride ( PVC ) ternary plastic alloy non-rigid foam was produced by physical blending and chemical crosslinking moulding foaming process .

  14. 研究了PA/PP塑料合金的制备和力学性能,PPgMA和EPDMgMA用量及引发剂用量对PA/PP塑料合金力学性能的影响。

    In this paper , preparation and mechanical properties of PA / PP polymer alloy was studied . The effect of the weight of PP g MA and EPDM g MA as well as initiator on the mechanical properties of PA / PP polymer alloy was investigated .

  15. FZB系列自吸离心泵,过流部件均采用氟塑料合金制造。

    FZB series of self-suction centrifugal pumps , its overflow part is made of Fluor plastic alloy .

  16. 在销盘式试验机上对氟塑料合金(F50-1)的高温摩擦学特性进行了试验研究。

    The tribological characteristics of Fluosopolymer alloy ( F50-1 ) at high temperature were experimentally studied with a pin-disc-type apparatus .

  17. CPL型PC&ABS塑料合金缺口冲击性能、无缺口冲击性能和相对断裂伸长与国外同类品种相比有明显的突破,其它机械性能相接近。

    The notched and unnotched impact strength as well as the elongation at break with the CPL types PC-ABS alloys are evidently better than those of the same type of PC-ABS alloys produced abroad . Other mechanical properties are about equal .

  18. 新型sPS/PA6/SsPS-H塑料合金的性能和形态结构

    Properties and morphology of sps / pa6 / ssps-h polymer alloy

  19. 研究了HPVC/ABS塑料合金的性能。

    The properties of HPVC / ABS plastics alloy were studied .

  20. 聚苯乙烯/聚乙烯塑料合金相容剂的研究进展

    Progress of Studies on PS / PE Plastic Alloys ' Compatilizer

  21. 水润滑塑料合金轴承数值分析的多重网格法

    Multilevel Method for the Numerical Analysis of Water-lubricated Plastic Alloy Bearings

  22. 塑料合金高弹性联轴器试验台的开发研究

    The exploitation and study of plastic alloy high-elastic coupling test rig

  23. 相容剂制备塑料合金的就地形成技术

    The Application of In Situ Technique in Preparation of Plastic Alloys

  24. 物理共混改性制塑料合金;

    Make the modified plastic alloy by physical altogether mixture ;

  25. 本文总结了PVC/ABS塑料合金的研制工作。

    This paper summarizes the research work on PVC / ABS alloy .

  26. 塑料合金的进展及在电工产品上的应用

    Improvement of plastics alloy and its application in electrical equipment

  27. 水润滑塑料合金轴承材料力学性能改性

    Research on Modifying Mechanic Performance of Water Lubricated Plastic Alloy Bearings Material

  28. ASC/PVC塑料合金的研制与改性

    The Study and Development of ASC / PVC Plastic Alloy

  29. ABS/改性PE/PC塑料合金的研究

    Study on abs / modified pe / pc plastic alloy

  30. 酚醛树脂塑料合金材料的摩擦性能研究

    Study on the Friction Property of Thermosetting Phenolic Aldehyde Resin Plastic Alloy