回转体

  • 网络Revolve;body of revolution;revolved;Revolved Body
回转体回转体
  1. 回转体垂直出水的一种非线性计算方法

    A non-linear method of calculation of vertical water-exit of body of revolution

  2. 用离散外形坐标型值表示的回转体线型。

    And ( 3 ) The shape profile of body of revolution is represented by a table of offset .

  3. Internet环境下回转体零件的图形浏览与特征识别

    Drawing browse display and feature recognition for rotational parts under Internet Environment

  4. 回转体零件低压铸造模具工装CAD的研究

    Molding Tool CAD for Gyrorotor Parts in Low Pressure Die Casting

  5. 回转体锻模CAD研究

    Study of the CAD System for the Forging Die for Revolving Bodies

  6. 基于三维平台的回转体成形件模具CAD系统

    Development of the Die CAD System for the Revolving Parts Based on 3D Platform

  7. 基于Agent的典型回转体CAPP系统设计与开发

    Design and Development of CAPP System of Typical Revolution Solid Based on Agent

  8. 回转体零件CAPP创成方法

    The Method of CAPP Formation for Revolution Parts in Machinery Manufacturing

  9. 对典型回转体零件CAD/CAPP一体化作了探讨。

    CAD / CAPP integration of the typical rotational parts is discussed in this paper .

  10. 本文利用现代流体力学计算技术,采用复合形法(COMPLEX),对八维参量的回转体最小阻力外形进行优化设计。

    Based on the modern digital technology of fluid mechanics , the eight-parameter optimum axisymmetric bodies for minimum drag are obtained by using COMPLEX method .

  11. 基于VB的回转体几何参数综合测量系统

    Synthetical Measuring System for Geometric Parameters of Revolving Body Based on VB

  12. 回转体类零件CAPP系统的研究与开发

    Research and Development of CAPP System for the Rotational Parts

  13. 小型回转体零件自动车削CAPP系统

    CAPP System for Automatic Turning Technology of Small Shaft Parts

  14. CIM环境下非回转体零件NC编程系统的开发与研究

    A Non-rotational Part NC Programming ( NCP ) System Under CIM Environment

  15. 轴对称回转体的CFD分析及厚边界层理论计算

    CFD Analysis and Thick Boundary Layer Theoretical Calculation on Axisymmetric Revolution body

  16. 基于AutoCAD的回转体零件参数造型

    Parametric Modeling for Revolving Model Parts Based on AutoCAD

  17. 回转体CAPP系统零件信息表述的研究

    Part Information Representation Research for Rotational Part CAPP System

  18. 基于特征的回转体CAPP工艺决策方法研究

    A Research of Process Decision-Making Methods for Turned Components CAPP Based on Features

  19. 本文介绍了回转体锻件CAD中锻件体积的计算方法,推导出了通用的计算公式,并编制了BASIC程序。

    This paper introduces the method of volume calculation in rotary forging CAD and derives the current formulas and works out the programme in BASIC .

  20. CIMS实验工程中的回转体零件加工工作站

    The Rotary Workpiece Machining Workstation in CIMS Engineering Research Center

  21. 介绍了回转体零件CAPP的工艺生成方法。

    The CAPP formation of revolution part in machinery manufacturing is introduced in this paper .

  22. 车桥回转体零件CAPP系统研究

    Research on CAPP for Axle Rotational Parts

  23. CIMS环境下回转体零件CAD系统的应用活动模型的研究

    An Approach to Application Activity Model for CAD System of Revolution Solid Part if the Environment of CIMS

  24. 基于回转体CAD/CAPP结构的图形文件OpenGL处理技术研究

    Study of Graphics File OpenGL Process Technology Based on CAD / CAPP Structure of Turning

  25. WC颗粒增强回转体表面制作轧辊工艺及性能研究

    Study on Process and Property of Roller Made of WC Reinforced Revolving Body Surface

  26. 本文介绍一种面向非回转体零件并采用特征映射方法实现CAD/CAPP信息集成的系统。

    Based on the method of feature mapping , an integrated system of CAD / CAPP for prismatic component is introduced .

  27. 在内场,给出了用简单Green函数方法求解回转体二阶绕射势的计算方法。

    In the inner domain , the boundary element method with 1 / r type Green function is used to calculate the secondorder diffraction potential for an axisymmetric body .

  28. Al2O3-TiC工程陶瓷回转体表面放电加工机理研究及仿真分析

    The Research and Simulation Analysis of the Electrical Discharge Machining Mechanism of the Al_2O_3-TiC Engineering Ceramics

  29. 阀体类非回转体零件CAPP系统(FTCAPP)

    CAPP System for Valve Body Type Nonrotary Components ( FTCAPP )

  30. 带与不带4个等尾翼回转体的尾部流动的LDV测量

    Stern Flow Measurements by LDV Unit on an Axisymmetric Body with and without Four Identical Tailplanes