后桥

冠状动脉16层螺旋CT成像对冠状动脉搭桥术后桥血管评价的研究

Investigation of coronary artery bypass grafts by 16-slice spiral CT angiography

PLC控制在汽车后桥壳焊接设备中的应用

Application of PLC Control in Automobile Rear Axle Housing Welding Equipment

汽车后桥主传动器CAD系统的研究和开发

Research and Development of the CAD System for Final Driver of Automobile Driving Axle

冠状动脉多层螺旋CT成像及冠脉造影对冠脉搭桥术后桥血管的评价经血管内腔冠状动脉血管造形术

Valuation of multi-spiral computed tomography angiography and coronary angiography on bypass artery after coronary artery bypass grafts

基于PLC的汽车后桥在线检测夹具控制系统设计

The Design of PLC-Based Controlling System of Clamp for on-Line Detect in Truck Rear Axle

肝移植术后桥脑中央髓鞘溶解症常规MRI及DWI表现（附3例报告）

MR and DWI imaging of central pontine myelinolysis after liver transplantation ( report of 3 cases )

ADAMS软件在复合式后桥动力学模拟中的应用大跨度组合吊桥优化设计&改进的序列线性规划方法

Application ADAMS to analysis of composite suspension The Optimum Design of Composite Suspension Bridge with Long Span & Improved Sequential Linear Programming Method

SGB后桥强度有限元分析

The Strength Analysis of SGB Car Bridge using Finite Element Method

抽象出基于后桥机加工车间平面布局的AGV路径图，利用图论原理表达AGV的路径；

Abstracts AGV 's path map based on workshop 's layout , uses Graphics Theory to describe AGV 's path ;

利用厂方提供的工艺参数，采用CAE技术进行仿真模拟，对后桥桥架成形工艺确认。

Emulational simulation taking advantage of CAE technology and actual technique parameters available from cooperation worker , and confirming the forming technique of rear axle bridges .

基于Deform-3D的后桥半轴摆辗新工艺分析

Analysis of new rotary-forging process of rear-semiaxis using Deform-3D

目的通过应用冠状动脉16层螺旋CT（MSCTA）成像对冠脉搭桥手术后桥血管评价，研究其临床应用的可行性。

Objective To evaluate the clinical application of16-slice spiral computed tomography angiography ( MSCTA ) in patients with coronary artery bypass grafts ( CABG ) .

针对汽车后桥在线检测在实际生产中的重大作用，采用PLC对汽车后桥在线检测夹具控制系统进行了设计，并对其工作原理和特点进行了介绍。

The on-line detect is important for processing of the truck real axle , the controlling system based on PLC in clamp for on-line detect was described and its working principle and characteristics is introduced .

根据汽车车桥特点及生产批量要求，目前在工程实际中汽车后桥的焊接广泛采用CO2气体保护焊。

Base on the characteristic and production lot of the rear axle , carbon-dioxide arc welding is widely used in the reality engineering of the rear axle welding at the present time .

基于Em-Plant汽车后桥装配线系统建模与仿真技术研究

Study on Simulation and Modeling Technology of Automobile Rear-Axle Assembly Line System Based on Em-Plant

主要描述汽车后桥桥架的CAD造型设计和成形可能性的CAE分析。

In this paper , it is mainly discussed that CAD model designing of rear axle bridges and CAE analysis of its forming possibility : ( 1 ) generating 3D solid graphic from limited 2D graphic data ;

利用轿车前、后桥的Pro/E三维数模建立其有限元模型，将CAD和CAE有机地结合在一起，提高建模效率。

The finite element models of the front and the rear member of one car are created with Pro / E model . The organic combination of CAD and CAE improves the efficiency and the precision of the FEA .

采用E-Factory、Witness软件进行计算机辅助建模和仿真，对H1后桥车间生产物流系统进行设计与优化。

E-Factory and Witness are used to computer-aided model and simulate , to design and optimize the production logistics system in the H1 automobile rear bridge shop .

提高焊接7T驱动后桥总成疲劳寿命方法

Investigation of enhancing the fatigue life of welding 7T driven rear axle assembly

EQ140汽车后桥的极值载荷分析及在疲劳试验中的应用

Analyses of Extreme load on Rear Axle and Its Application to Fatigue Test

EQ-153汽车后桥圆锥主动齿轮裂纹分析

Analysis of Cracks in Bevel Drive Gear of EQ-153 Rear Axle

确定了Ar弧焊及CO2气体保护焊在低碳钢母材上的相应观察窗口，由此开发出焊接机器人视觉系统，并在汽车后桥上得到应用。

Correspondingly , a visual window used for welding mild steel with Ar and CO_2 shielding gases is determined . On the basis of this principle , a visual system of welding robot is developed and applied to production practice for rear axles of automobile .

提出一种基于STEP标准的汽车后桥主传动器中圆锥齿轮类零件的几何模型描述，并制定出它的应用协议（ZCAP）。

This paper presents a geometric model description methods of the cone gear for final driver of automobile driving axle system based on STEP , and establishes application protocol ( ZCAP ) .

以测量轮实测试验场道路力载荷谱作为迭代控制信号，在MTS八通道试验台上对某轿车后桥进行了道路模拟试验。

In this paper , using loading spectra of force acquired in proving ground by wheel force transducer as control signal , road simulation of a car 's rear axle is proceeded on MTS 8 channel road simulator .

采用台架疲劳试验模拟了T-car后桥在道路试验中的受力状态。

The Bridge The strained condition of the T-car rear axle in road tests has been simulated in bench fatigue tests .

分别利用一维和二维载荷谱对EQ1030T型轻型车后桥进行了疲劳寿命预测。

The one-dimension and two-dimension load spectra are used to predict the fatigue life of the rear axle in EQ1030T light truck .

着重介绍SX6125A低地板双后桥双层城市客车底盘设计特点及优点，分析其在双层城市客车上的应用及发展前景。

The author introduces the design and merit of the double-deck city bus chassis SX6125A , and analyses its application prospect in the future .

运用E-Factory仿真软件建立了后桥生产车间的仿真模型，并对两生产车间的布局方案进行仿真分析，从而获得最优的方案。

It uses E-Factory simulation software to establish the simulation model of a rear axle workshop and simulates and analyzes two feasible workshop layouts and gets the better choice .

利用动显式有限元软件LS-DYNA，对影响后桥壳液压成形的胀形比、加载路径、摩擦系数、管坯材料性能等因素分别进行了大量的模拟分析。

Large quantity simulation analyses about some factors , which influence the hydroforming for real axle housing , such as bulge ratio , route of loading force , friction coefficient and tube blank characteristics , are operated separately with the dynamic explicit finite element analysis software LS-DYNA .

根据前人建立的极值分布理论和分析技术确定了EQ140后桥在不同道路上垂直载荷谱的最短测量里程。

The minimum measurement mileage of load spectrum was determined on the basis of largest ex - treme value distribution theory and analysis technique , which were presented by forerunners .