压敏胶粘剂

  • 网络pressure sensitive adhesive;PSA;PSA-Pressure Sensitive Adhesive
压敏胶粘剂压敏胶粘剂
  1. 标签用丙烯酸酯乳液压敏胶粘剂性能的研究

    Study on properties of polyacrylate emulsion PSA for label

  2. 研究表明,环境优良、易于被筛选除去的压敏胶粘剂应具备良好的变形性、较高的快粘力和粘和力;

    The study showed that the PSA with better distortion properties , high tack and peel adhesion could be easily screened in the waste paper recycling process .

  3. 溶液型SBS压敏胶粘剂的研制

    Preparation of Solution type SBS Pressure sensitive adhesive

  4. SBS的结构及其在压敏胶粘剂中的应用&Ⅲ.应用

    Structure of SBS and its Application in Pressure-Sensitive Adhesive ⅲ . Application and our Work

  5. 丙烯酸酯压敏胶粘剂作为A组分,聚氨酯胶粘剂作为B组分,把A组分和B组分混合,制备双组分丙烯酸酯胶粘剂。

    Acrylic pressure sensitive adhesive was selected as A component , polyurethane adhesive was selected as B component , two-component acrylic adhesive was prepared by mixing A and B component .

  6. SDS型胶粘剂的研究Ⅰ.SDS嵌段共聚物热熔压敏胶粘剂

    Studies on SDS block copolymer based adhesives ⅰ . hot melt pressure sensitive adhesives of SDS block copolymer

  7. 以丙烯酸丁酯(BA)、苯乙烯(St)、甲基丙烯酸甲酯(MMA)为原料,用过氧化二苯甲酰(BPO)为引发剂,在甲苯溶剂中,三元共聚合成了丙烯酸压敏胶粘剂;

    Ternary polymerized acrylic pressure sensitive adhesive was synthesized from butyl acrylate ( BA ), methyl methacrylate ( MMA ) and styrene ( St ) in toluene solvent initiated by benzoyl peroxide ( BPO ) .

  8. 结果表明:SBS/CPE共混体系对PVC人造革的粘接有正协同效应,并可以得到熔融粘度比SBS小、而粘接力比SBS大的热熔性压敏胶粘剂。

    The results showed that the adhesion strength of CPE / SBS blend system had significant positive departure for PVC leatherette . And a pressure-sensibility thermosol with viscosity lower than SBS , adhesivity higher than SBS was obtained .

  9. BA-St-MMA压敏胶粘剂的合成与性能

    Synthesis and properties of BA-St-MMA pressure sensitive adhesive

  10. 聚合单体为丙烯酸丁酯、丙烯酸-2-乙基己酯、甲基丙烯酸甲酯和丙烯酸,聚合温度为69℃,反应时间约为6h。压敏胶粘剂涂布量为60g/m2。

    The monomers were butyl acrylate , 2-ethylhexyl acrylate , methyl methacrylate , crylic acid and so on . The polymerization was reacted at 69 ℃ for 6h . The coating weight of pressure-sensitive adhesive was 60g / m2 .

  11. 热熔压敏胶粘剂的市场和技术动向

    Trend of market and technique of hot melt pressure sensitive adhesives

  12. 广东省丙烯酸类压敏胶粘剂的生产使用现状及发展前景

    Present Situations And Development Prospects of Acrylic Pressure-Sensitive Adhesive in Guangdong

  13. 压敏胶粘剂的贮存寿命试验研究

    Study of the Storage Life Time of a Pressure - sensitive Adhesive

  14. 有机硅耐高温压敏胶粘剂的研究

    Studies on Silicon Pressure-Sensitive Adhesives Tolerance to High - temperature

  15. 偏光片用压敏胶粘剂的研究概况

    A Survey on Research of Pressure Sensitive Adhesives for Polarizer

  16. 压敏胶粘剂研究进展

    Advances in Pressure Sensitive Adhesives Research advancement in pressure-sensitive adhesives

  17. 乳液法聚丙烯酸酯压敏胶粘剂的制备

    Preparation of Acrylate Pressure Sensitive Adhesive by Emulsion Polymerization

  18. 偏光片用压敏胶粘剂的合成及性能研究

    Study on the Preparation and the Properties of Pressure Sensitive Adhesive for Polarizer

  19. 环氧&丙烯酸酯复合乳液型压敏胶粘剂

    Pressure Sensitive Adhesives of Epoxy-Acrylate Complex Emulsion Polymers

  20. 本文主要介绍了压敏胶粘剂所用增粘树脂的种类、特征及其选用的方法。

    Synthesis of MQ silicone resin and its application in silicone pressure sensitive adhesive ;

  21. 功能性单体在偏光片压敏胶粘剂合成中的应用研究

    The Application Study of Functional Monomers on the Syntheses of Pressure Sensitive Adhesive for Polarizer

  22. 橡胶型压敏胶粘剂的研制

    Development of Rubber Pressure Sensitive Adhesive

  23. 天然橡胶乳液压敏胶粘剂

    Natural Rubber Latex Pressure Sensitive Adhesive

  24. 本文介绍了一种可反复粘贴的压敏胶粘剂(带)的主要性能与制备方法。

    General character and preparation method of one kind of removable pressure sensitive adhesive are introduced .

  25. 石油树脂蜡雾点对溶剂型压敏胶粘剂性能的影响

    Effect of C_5 hydrocarbon resin 's wax cloud point on properties of solvent type pressure sensitive adhesive

  26. 本论文采用乳液聚合工艺合成的水溶性丙烯酸酯压敏胶粘剂,就是这样一种产品。

    In this paper one water-soluble acrylate PSA not forming " stickies " in papermaking has been synthesized by emulsion polymerization technique .

  27. 因此,被广泛应用于压敏胶粘剂、热熔性胶粘剂、交通路标漆、橡胶增粘剂、涂料、印刷油墨、纸张的疏水剂等。

    So it is widely applied to pressure-sensitive adhesive , hot-melt adhesive , traffic paint , viscosity increaser for rubber , printing ink , hydrophobic agent for paper etc.

  28. 探讨了基本单体和功能单体及乳化剂的不同组合,对标签用丙烯酸酯乳液压敏胶粘剂性能的影响。

    This thesis has probed into different combination of basic monomer and function monomer and emulsifying agent , besides it explored the primary factors of influence on properties of polyacrylate emulsion PSA for label .

  29. 本文介绍了在有机过氧化物存在下,合成接枝聚合物的方法,以及接枝物用作热熔胶、热熔密封胶和热熔压敏胶粘剂的基体聚合物的性能和应用。

    In this paper , the synthetic methods of graft polymers in the presence of peroxide were described . The properties and applications of grafted polymers as basic polymer of hot-melt adhesives were also discussed .

  30. 聚丙烯酸树脂压敏胶为胶粘剂;

    Polyacrylic resin pressure-sensitive adhesive as adhesive ;