冷轧薄板

H公司冷轧薄板项目运作与公司治理结构的完善

The Project Operation of Cold Rolling Plate in H Company and the Improvement of the Corporate Governance

含Nb，Ti冷轧薄板工艺研究

Research into the Process Parameters of Cold-rolled Sheet Containing Niobium and Titanium

借助两种不同的方法，测定了冷轧薄板的应变硬化指数（n）、塑性应变比（r）值和伸长率。

The strain hardening exponent ( n ), plastic strain ratio value ( r ) and elongation of the cold rolled thin shect have been measured by two different methods .

冷轧薄板厚度检测及自动控制（AGC）系统的研究与应用

The Research and Application of Thickness Gauge and the Automatic Control System of Thickness in the Cold Rolled Sheet Steel

介绍与分析目前最新的冷轧薄板物流自动厚度控制（MassFlowAGC）及激光直接测量带钢速度技术，厚度偏差可控制在≤±0.7%；

The latest technology of mass flow AGC and laser velocity detector are introduced and analyzed . By this technology , strip thickness deviation can be controlled within the range of ± 0.7 % .

超纯净Ti-IF冷轧薄板的组织与性能

Microstructures and Properties of Ultra-Pure Ti-IF Cold - Rolled Thin Sheet

简析唐钢冷轧薄板厂MES系统酸轧计划的编制

A Brief Introduction to the Compiling of Acid Rolling Plan Regarding MES System Applied in Tangshan Iron and Steel Group Strip Cold Rolling Plant

研究了工艺参数对含（0.062～0.075）Nb，（0.025～0.028）Ti冷轧薄板性能的影响。

The effects of the process parameters on the mechanical properties of cold-rolled sheets containing 0.06 % ~ 0.075 % Nb and 0.025 % ~ 0.028 % Ti are studied .

武钢第二炼钢厂使用RH-KTB设备主要生产w（C）很低（w（C）≤15×10-6）的冷轧薄板钢。

The ultra-low carbon ( w ( C )≤ 15 × 10 ~ ( - 6 )) cold rolled strip is mainly produced with RH-KTB in No. 2 Steelmaking Plant of Wuhan Steel .

钢铁行业在目前的产业结构调整中，将着重发展高附加值、高性能的产品，这就使得H公司的冷轧薄板项目在当前具有极其重要的意义。

Adjustment is being carried out in the iron and steel industry and focus has been put on those products with high value and high quality . All this has attached great importance to the project of cold rolling plate in H Company .

对于LCAK、ELC、ULC等冷轧薄板钢种，应以采用CAS和RH精炼工艺方法为主导。

So , CAS and RH should be chosen as the main refining method for producing steels for cold rolled sheets .

结果表明：行李箱内板危险部位的变形方式为胀形&深拉延变形，r值和n值较高的冷轧薄板具有较高的成形极限，相应地其冲压成形安全裕度也较大。

It is shown that the forming method of dangerous parts in trunk lid inner panel belongs to bulge deep drawing deformation . The cold rolled sheet with relatively high r value and n value can obtain higher forming limit , correspondingly the forming safe allowance is relatively high .

基于鞍钢新轧集团股份有限公司冷轧薄板厂MES工程的实际情况，介绍了机组排产作业计划过程中的任务分配方法。

An task distribution method of unit operation planning is introduced , based on the real situation of cold-rolling mill MES of Angang New Steel Stock Ltd. Load balancing and optimal matching between unit and production task are set as criteria .

为了消除TiSULCAK（含Ti超低碳铝脱氧镇静钢）钢冷轧薄板上的铅笔型气泡，将铸机从弧型改为立弯型是最有效的措施；

Conversion of caster from the curved to the vertical bending one is the most effective measures to eliminate the pipe listers and slivers for cold rolled Ti SULCAK ( Ti-beating extra low carbon steel sheet ) .

冷轧薄板厂二次冷轧机组采用TSI公司的Model3000型激光测速仪对带钢速度进行检测。

Model 3000 LDV ( Laser Detector Velocity ) made by TSI is applied in DCR ( Double Cold Reduction mill ) line to detect the rolling speed of strip .

用网格自动应变测试分析系统ASAME测试了11炉批冷轧薄板的成形极限，对实际测量的成形极限与模拟计算的成形极限进行了比较。

The forming limitation of eleven cold rolled sheets was measured by strain measurement and analysis system ( ASAME ), and compared to analogue calculating results .

冷轧薄板m值的测试与分析

The analysis and measurement of m value for cold rolled sheets

IF钢冷轧薄板罩式退火工艺的优化

Optimization of Processing Parameters of Batch Annealing in Cold-rolled IF Steel

上海冷轧薄板工程及引进机组

Shanghai cold rolling steel sheet project and its imported production line

我国冷轧薄板市场需求与企业竞争力研究

My Cold-rolled Sheet Market Demand and the Competitiveness of Enterprises Study

冷轧薄板时的延伸困难问题与适轧厚度

Problem of Reducibility in Sheet Cold-Rolling and Gauge Suitable to Roll

冷轧薄板包装托梁的改型

Retrofit study of the packing bracket for cold rolled steel sheet

基于条元法的冷轧薄板稳定性分析

Stability analysis of cold rolled plate based on strip element method

超低碳冷轧薄板单向拉伸过程变形机理

Deformation Mechanism in Simple Tension of Cold-Rolled Extra-Low-Carbon Light Gauge Sheet

冷轧薄板冲压性能的影响因素

Influencing Factors on Drawing Properties of Cold Rolled Thin Plate

1420铝锂合金冷轧薄板的各向异性研究

Study on the Anisotropy of Al-Li Alloy 1420 Cold-Rolling Sheet

冷轧薄板压平缝焊接头力学行为的有限元分析

Fracture Mechanics Analysis of Mash Seam Welded Joints of Sheet Using FEM

冷轧薄板板形及其优化算法研究

Study on the Profile of Cold Rolling Sheet & Its Optimum Algorithm

采用混合摩擦模型预报冷轧薄板轧制力

Rolling Force Prediction for Cold Rolled Thin Plate Using Mixed Friction Model

冷轧薄板钢退火粘结现象有限元分析

The finite element analysis of bonding for annealed cold rolled sheet steel