冷模试验

大型CFB锅炉旋风分离器的冷模试验研究

Cold Experimental Study on the Cyclone Separator in a Large-scale Circulating Fluidized Bed Boiler

为了评价实验室小型冷模试验开发出来的新型高效旋风分离器应用到工业过程中的性能，在完全相同条件下进行了与成熟的PV型旋风分离器的大型冷模放大对比试验。

To evaluate the performances of new type high-efficiency cyclone developed in the cold-ran pilot plant in commercial application , large cold-run scale-up contrast tests have been performed at the same conditions to compare with commercially proven PV type cyclone .

针对丙烯腈反应器操作条件，运用旋风分离器尺寸分类优化设计理论，设计了三级PV型旋风分离器，并确定了合理的大型冷模试验方案。

Based on the operational conditions of an acrylonitrile reactor , a three stage PV type cyclone separator was designed with the use of the optimum design theory of size classification of cyclone separators , and a reasonable experimental plan of pilot scale cold model was determined .

卧式釜气液传质与搅拌特性的研究发酵罐中新型轴向流搅拌桨的冷模试验

Studies on Gas-Liquid Mass Transfer and Agitation Characteristics of Horizontal Vessel

乙炔二聚反应鼓泡塔冷模试验

Cold moulding test of bubble tower in ACETYLENE DIMERIZATION

以水为物系，对喷射式分布器进行了冷模试验。

Cold model experiment of spray nozzle distributor was conducted with water as medium .

自稳式宽调节比燃烧器及其冷模试验研究

An Autostable Burner withy Wide Regulation Ratio and Its Cold Model Experiment and Research

NS-A型分解炉系统冷模试验结果与分析

Experimental tests on a laboratory model of NS-A Type Calciner and analysis of the measurements

喷射式分布器的冷模试验

Cold model experiment of spray nozzle distributor

运行参数对四角切圆锅炉炉内空气动力特性影响的冷模试验研究

Cold Model Test Research on Effects of Operation Parameters on Aerodynamic Characteristics of Tangential Boiler

本研究为磷铵管式反应器冷模试验的一部分。

The study is one part of the model tests for ammonium phosphate pipe-line reactor .

设计参数对四角切圆锅炉实际切圆直径影响的冷模试验研究

Cold Model Test Research for Design Parameters Affecting on Real Circle Diameter of Tangential Boiler

熔融还原中流态化预还原系统返料集尘器冷模试验研究

The Cold Model Test of the Returns Dust Collector for use in the Fluidized Prereduction System in Smelting Reduction

描述了鼓泡式烟气脱硫原理性试验台气体流动冷模试验及结果。

Cold model tests and test results are described of gas-liquid flows in a wet bubbling flue-gas desulfurization test rig .

为了将环流反应器引入煤炭液化领域，建立了大型环流反应器冷模试验装置。

To introduce the loop reactor for coal liquefaction , a large-scale loop reactor cold model experimental apparatus was built .

通过冷模试验研究了一种新型煤粉浓缩装置的浓缩特性和阻力特性，并简要介绍其工业应用情况。

In this paper concentrating characteristic and resistance characteristic of a new pulverized coal concentrator are studied through cold model test .

结合冷模试验研究设计、运行参数对炉内空气动力场的影响，并把数值方法引入对非正常工况的分析。

By comparison with cold model test results , the numerical approach is identified and then applied to analysis of abnormal operation .

冷模试验研究对比结果表明，新开发的汽提器汽提效率较普通环形挡板式汽提器汽提效率提高10百分点以上。

The cold modle experiment revealed that the stripping efficiency was over 10 % higher than that of the conventional ring baffle stripper .

进一步肯定了该仪器的一系列优点，可供各种粉体处理设备冷模试验使用。

The satisfactory results show many merits of the instrument , which can be used in various cold model test of powder equipments .

冷模试验范围包括：1、再燃风和燃尽风的不同布置方式（切向布置和对墙布置）、布置高度；

Different disposal style for the reburning air & burning out air ( tangential or front and rear walls ) and their disposal heights .

从冷模试验入手，以提高汽提器汽提效率为目标，开发了催化裂化沉降器待生催化剂多级组合式结构汽提器。

Through the cold modle experiment , the multi-stage combination stripper for FCC spent catalyst has been successfully developed to improve the stripping efficiency .

冷模试验结果表明，在通常的空速和氢油比范围内，床层膨胀率可以控制在10%以内；

The cold model test results showed that for a normal space velocity and hydrogen / oil ratio , the bed expanding ratio can be controlled within 10 % .

在冷模试验得到的优化的结构参数基础上，建立了一套生物质最大处理量为5kg/h的导向管喷动流化床生物质裂解反应器。

Based on the optimized construction parameters from the experiment on the cold model , an spout-fluidized reactor with a conduit inside was designed ( capacity of 5 kg / h of biomass ) and installed .

根据聚酯缩聚热模、冷模试验数据建立的关联式计算，剖析了聚酯的缩聚工艺及几种不同结构型式的反应器（槽式反应器、圆盘反应器、笼式反应器）结构及其反应特点。

The polyester condensation process and the structure and reaction characteristics of several types of reactors , including tank reactor , disc reactor and cage reactor , were analyzed according to the correlation equation based on the data of polyester condensation experiments .

在新型水煤浆气化炉冷模试验台上进行了大量的实验研究，分析了气化炉喷嘴入射角对炉内流场分布的影响。

Rules that govern the influence of the jet-nozzle 's incidence angle on the flow field , within a new type of coal water slurry ( CWS ) gasifier , are analyzed by using test results obtained on a relevant cold state test facility .

作者从流体力学基本原理出发，提出了绝热轴向固定床反应器低阻气流均布装置的设计原则，并在三种不同直径的冷模试验装置中进行实验验证。

In this paper , based upon the basic principle of fluid mechanics , a method of designing the gas distributors of low resistance in adiabatic fixed-bed reators was proposed and , moreover , the experimental verification was completed in the cooling model equipments with three different diameters .

进行了氮气-水体系的冷模运转试验，考察了表观气速、压力和表面张力对环流反应器中气含率的影响。

Many tests for nitrogen-water system were made with this apparatus , and the effects of gas superficial velocity , pressure and superficial tension on gas holdup were investigated .

W型辐冷器环模试验与在轨测试比较

Comparison of test between in thermal environment experiment and in flying on orbit for W type radiant cooler

根据冷态模化试验研究结果，制定出了大庆油田热电厂670T／H锅炉燃烧器改造方案并加以实施。

The alteration solution to the 670T / H boiler was established and carried out based on the results of cold model experiments .

新型燃用无烟煤的CUF锅炉冷态模化试验研究

An Experimental Study on the Cold-stare Simulation of an Anthracite-fired New Type CUF Boiler